Microstructural examination of zirconium alloys following in-pile creep testing in the HALDEN reactor
Source abstract
Abstract
Post-irradiation examination (PIE) in the form of transmission electron microscopy (TEM) was used to characterize the microstructure of several specimens of Zircaloy-2 and Zircaloy-2 plus 1% Nb that had previously underwent in-pile creep testing in the HALDEN reactor. The purpose of the examination was to explore a microstructural basis for an apparent substantially increased rate of hardening over that observed with similar materials in the higher fast-flux environments of the ATR or HFIR, and to investigate the increased creep strength exhibited by the Nb-containing alloy relative to pure Zircaloy-2. The analysis of irradiation-induced defects indicated a higher than expected density, which was consistent with the observed high hardening rate. Modeling based on mean field rate theory suggests the lower neutron flux in the HALDEN reactor results in a higher fraction of irradiation-induced defects being available for sink (loop) nucleation and growth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. “Characterization of neutron irradiation damage in zirconium alloys – an international “Round-Robin” experiment10.1016/0022-3115(79)90103-X ↗
2. Phase instability, decomposition and redistribution of intermetallic precipitates in Zircaloy-2 and -4 during neutron irradiation10.1016/0022-3115(87)90093-6 ↗
3. A review of microstructure evolution in zirconium alloys during irradiation10.1016/0022-3115(88)90093-1 ↗
4. Microstructural characterization of neutron-irradiated and post-irradiated annealed Zircaloy-210.1016/0022-3115(88)90105-5 ↗
5. Evolution of microstructure in zirconium alloys during irradiation
6. Effects of neutron irradiation on microstructure and properties of Zircaloy
7. In situ monitored in-pile creep testing of zirconium alloys10.1016/j.jnucmat.2013.08.043 ↗
8. Development of microstructure and irradiation hardening of Zircaloy during low dose neutron irradiation at nominally 358°C10.1016/j.jnucmat.2011.07.006 ↗
9. Development of microstructure and irradiation hardening of Zircaloy during low dose neutron irradiation at nominally 377-440°C10.1016/j.jnucmat.2014.03.004 ↗
10. The recovery of irradiation damage for Zircaloy-2 and Zircaloy-4 following low dose neutron irradiation at nominally 358°C10.1016/j.jnucmat.2015.03.003 ↗
11. The primary origin of dose rate effects on microstructural evolution of austenitic alloys during neutron irradiation10.1016/S0022-3115(02)01202-3 ↗
12. Characterization and modeling of creep mechanisms in Zircaloy-410.1016/j.jnucmat.2006.01.023 ↗
13. Investigation on microstructural evolution and hardening mechanism in dilute Zr-Nb binary alloys10.1016/j.jnucmat.2016.09.016 ↗
14. Accelerated materials evaluation for nuclear applications10.1016/j.jnucmat.2017.02.039 ↗
15. Karlsen · 2010
16. Franklin · 1983
17. APT characterization of irradiated high Nickel RPV steel10.1016/j.jnucmat.2006.12.015 ↗
18. Atom probe tomography of reactor pressure vessel steels: an analysis of data integrity10.1016/j.ultramic.2010.12.033 ↗
19. The use of a laser-assisted local electron atom probe and TEM to examine the microstructure of Zircaloy and precipitate structure following low dose neutron irradiation at nominally 358°C10.1016/j.jnucmat.2012.10.006 ↗
20. Redistribution of alloying elements in Zircaloy-2 after in-reactor exposure10.1016/j.jnucmat.2014.07.072 ↗
21. The primary origin of dose rate effects on microstructural evolution of austenitic alloys during neutron irradiation10.1016/S0022-3115(02)01202-3 ↗
22. The effect of dose rate on the response of austenitic stainless steels to neutron irradiation10.1016/j.jnucmat.2005.09.011 ↗
23. On the effect of dose rate on irradiation hardening of RPV steels10.1080/14786430412331319910 ↗
24. Modeling the influence of irradiation temperature and displacement rate on hardening due to point defect clusters in ferritic steels
25. Displacement rate dependence of irradiation creep as predicted by the production bias model10.1016/S0022-3115(96)00310-8 ↗
26. Theory of electron-irradiation-induced amorphization10.1016/0956-7151(90)90085-U ↗
27. Radiation rate dependence of microstructure evolution10.1016/0022-3115(89)90524-2 ↗
28. Was · 2007
29. The effect of radiation upon diffusion in metals10.1016/0022-3115(78)90256-8 ↗
30. Radiation damage theory
31. Production bias due to clustering of point defects in irradiation-induced cascades10.1080/01418619208205596 ↗
32. Bias factors for use in reaction-rate-theory analysis of void swelling and radiation creep10.1080/00337577808234471 ↗
33. Point defect behavior in irradiated materials10.1016/0001-6160(75)90148-0 ↗
34. Modeling defect cluster evolution in irradiated structural materials: focus on comparing to high-resolution characterization studies10.1557/jmr.2015.25 ↗
35. Cluster dynamics modeling of irradiation growth of zirconium single crystals10.1016/j.jnucmat.2009.05.016 ↗
36. Simulating radiation damage accumulation in a-Fe: a spatially resolved stochastic cluster dynamics approach10.1016/j.commatsci.2015.02.041 ↗
37. A rate-theory approach to irradiation damage modeling with random cascades in space and time10.1007/s11661-014-2409-8 ↗
38. Diffuse interface modeling of void growth in irradiated materials. Mathematical, thermodynamic and atomistic perspectives10.1016/j.cossms.2014.01.002 ↗
39. An examination of the use of the modified jogged-screw model for predicting creep behavior in Zircaloy-410.1016/j.actamat.2013.04.014 ↗
40. Substructure evolution of Zircaloy-4 during creep and implications for the modified jogged-screw model10.1016/j.msea.2016.04.016 ↗
41. A model for steady state creep based on the motion of jogged screw dislocations10.1016/0001-6160(65)90034-9 ↗