journal article·2019-06

Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms

Qingbo Jia, Paul Rometsch, Philipp Kürnsteiner, Qi Chao, Aijun Huang, Matthew Weyland, Laure Bourgeois, Xinhua Wu

Acta Materialia· Volume 171
Publisher page

Abstract

Abstract Additive manufacturing, or 3D printing, has brought tremendous opportunities for the design and making of metallic components with high geometrical complexity. However, in order to maximize the performance and functionality of a specific part, the additive manufacturing industry currently still faces fundamental issues of material processability and limited mechanical properties. Here, we report a high strength in-process and post-process friendly Al alloy specifically developed for the selective laser melting (SLM) process, one of the most commonly used additive manufacturing techniques. We found that the introduction of Mn and Sc as major strengthening elements significantly improved the processability of the Al alloy and its corresponding mechanical properties due to the rapid solidification nature of the SLM process. The developed alloy demonstrates an exceptional high thermal stability, which enables the utilization of a very simple post heat treatment to relieve the residual stresses generated during the SLM process, maintain a high solid solution strengthening effect from Mn and simultaneously achieve exceptional precipitation strengthening from a high density of nano-sized Al3Sc precipitates. We created a new high strength Al alloy with a yield strength of up to 560 MPa and a ductility of about 18% after a simple industrially desirable post heat treatment of 5 h at 300 °C. The highly enhanced alloy properties, good processability and simple post heat treatment of the developed alloy offers tremendous benefits for the fabrication of complex high performance lightweight engineering components made by SLM.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
2. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
3. Metal additive manufacturing: a review of mechanical properties10.1146/annurev-matsci-070115-032024 ↗
4. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
5. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
6. Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting10.1016/j.actamat.2011.12.032 ↗
7. Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: a fundamental alloy design approach10.1016/j.actamat.2015.04.035 ↗
8. Initiation and growth mechanisms for weld solidification cracking10.1179/1743280413Y.0000000020 ↗
9. Selective laser melting of Al7050 powder: melting mode transition and comparison of the characteristics between the keyhole and conduction mode10.1016/j.matdes.2017.09.014 ↗
10. Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys10.1557/mrs.2016.214 ↗
11. Defining the tensile properties of Al-12Si parts produced by selective laser melting10.1016/j.actamat.2016.12.044 ↗
12. A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility10.1016/j.actamat.2015.05.017 ↗
13. Additive manufacturing of metallic components-process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
14. Aluminum alloys for selective laser melting - towards improved performance
15. Effect of zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy10.1016/j.scriptamat.2017.02.036 ↗
16. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
17. A heat treatable TiB2/Al-3.5 Cu-1.5 Mg-1Si composite fabricated by selective laser melting: microstructure, heat treatment and mechanical properties10.1016/j.compositesb.2018.04.026 ↗
18. Microstructural features of Sc- and Zr- modified Al-Mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
19. Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr- modified Al-Mg alloys10.1016/j.matdes.2017.11.053 ↗
20. Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting10.1016/j.actamat.2018.04.053 ↗
21. Effect of platform temperature on the porosity, microstructure and mechanical properties of an Al-Mg-Sc-Zr alloy fabricated by selective laser melting10.1016/j.msea.2018.06.049 ↗
22. Electrochemical behavior of the β-phase intermetallic (Mg2Al3) as a function of pH as relevant to corrosion of aluminium-magnesium alloys10.1016/j.corsci.2012.12.022 ↗
23. Precipitation of Al3Sc in binary Al-Sc alloys10.1016/S0921-5093(01)01326-0 ↗
24. Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization10.1016/S1359-6454(03)00160-5 ↗
25. Precipitation in cold-rolled Al-Sc-Zr and Al-Mn-Sc-Zr alloys prepared by powder metallurgy10.1016/j.matchar.2013.09.010 ↗
26. Massive nanoprecipitation in a Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition10.1016/j.actamat.2017.02.069 ↗
27. Precipitation evolution in Al-0.1 Sc, Al-0.1 Zr and Al-0.1 Sc-0.1 Zr (at.%) alloys during isochronal aging10.1016/j.actamat.2010.05.054 ↗
28. Composition evolution of nanoscale Al3Sc precipitates in an Al-Mg-Sc alloy: experiments and computations10.1016/j.actamat.2005.08.035 ↗
29. Atom probe tomographic study of a friction-stir-processed Al-Mg-Sc alloy10.1016/j.actamat.2012.09.015 ↗
30. Evolution of nanoscale precipitates in Al microalloyed with Sc and Er10.1016/j.actamat.2009.04.034 ↗
31. Trajectory overlaps and local magnification in three-dimensional atom probe10.1063/1.126545 ↗
32. Stabilizing nanostructures in metals using grain and twin boundary architectures10.1038/natrevmats.2016.19 ↗
33. A study of precipitation strengthening and recrystallization behavior in dilute Al-Er-Hf-Zr alloys10.1016/j.msea.2015.05.027 ↗
34. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
35. SLM-processed Sc-and Zr- modified Al-Mg alloy: mechanical properties and microstructural effects of heat treatment10.1016/j.msea.2017.06.089 ↗
36. Polmear · 2017
37. Scandium in aluminium alloys10.1179/174328005X14311 ↗
38. Columnar to equiaxed transition in Al-Mg (-Sc)-Zr alloys produced by selective laser melting10.1016/j.scriptamat.2017.10.021 ↗
39. Exploring dendrite coherency with the discrete element method10.1016/j.actamat.2011.11.042 ↗
40. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys10.1080/14686996.2017.1361305 ↗
41. Solute strengthening in random alloys10.1016/j.actamat.2016.09.046 ↗
42. Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion10.1016/j.scriptamat.2018.08.025 ↗
43. Impurity diffusion of scandium in aluminium10.4028/www.scientific.net/DDF.143-147.115 ↗
44. Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation10.1016/S0921-5093(03)00624-5 ↗
45. Strengthening mechanisms in solid solution aluminum alloys10.1007/s11661-006-0142-7 ↗
46. Mechanical behaviour and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminium alloy10.1016/j.actamat.2013.09.042 ↗
47. Grain boundary stability governs hardening and softening in extremely fine nanograined metals10.1126/science.aal5166 ↗
48. Precipitation hardening10.1007/BF02670416 ↗
49. Precipitation hardening caused by a difference in shear modulus between particle and matrix10.1002/pssa.2210780223 ↗
50. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
51. Transition of tensile deformation behaviors in ultrafine-grained aluminium10.1016/j.actamat.2005.05.005 ↗
52. Strain hardening, strain rate sensitivity, and ductility of nanostructured metals10.1016/j.msea.2003.10.214 ↗
53. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
54. Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗