journal article·2016-02Open access

Texture evolution during static recrystallization of cold-rolled magnesium alloys

Z.R. Zeng, Y.M. Zhu, S.W. Xu, M.Z. Bian, C.H.J. Davies, N. Birbilis, J.F. Nie

Acta Materialia· Volume 105

Abstract

Abstract Texture evolution in cold-rolled Mg-0.3Zn-0.1Ca, Mg-0.4Zn and Mg-0.1Ca (at.%) alloys during static recrystallization is monitored using a quasi-in-situ electron backscatter diffraction (EBSD) method. The quasi-in-situ EBSD results show that most of recrystallized grains formed in the early stage of recrystallization have randomised orientations in the ternary alloy and they grow uniformly during the recrystallization process. The formation and uniform growth of these recrystallized grains with randomised orientations give rise to a weak texture in fully recrystallized samples of the ternary alloy. A weak recrystallization texture also forms in the early stage of recrystallization in the two binary alloys, but it is gradually replaced by a strong basal texture via the preferential growth of recrystallized grains with specific orientations. The grain size in the ternary alloy is smaller than those in the two binary alloys at each stage of recrystallization, and the grain size distribution in the ternary alloy is significantly narrower than those in the two binary alloys after full recrystallization. Solute segregation to grain boundaries is observed in all three alloys in the fully recrystallized state. It is hypothesised that Zn and Ca atoms in the ternary alloy segregate strongly to high-energy boundaries of the recrystallized grains that would otherwise grow preferentially in the counterpart binary alloys, and that this co-segregation would significantly reduce the boundary mobility, by reducing grain boundary energy and enhancing solute dragging effect, and therefore lead to a more uniform growth of recrystallized grains with randomised orientations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Preface to the viewpoint set on: the current state of magnesium alloy science and technology10.1016/j.scriptamat.2010.06.029 ↗
2. Critical Assessment 6: magnesium sheet alloys: viable alternatives to steels?10.1179/1743284714Y.0000000596 ↗
3. Current issues in magnesium sheet alloys: where do we go from here?10.1016/j.scriptamat.2014.04.017 ↗
4. Effects of yttrium and zinc on the texture, microstructure and tensile properties of hot-rolled magnesium plates10.1016/j.msea.2012.09.010 ↗
5. Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets10.1016/j.scriptamat.2009.12.033 ↗
6. Sheet texture modification in magnesium-based alloys by selective rare earth alloying10.1016/j.msea.2011.01.080 ↗
7. On the deformation, recrystallization and texture of hot-rolled Mg–2.9Y and Mg–2.9Zn solid solution alloys—A comparative study10.1016/j.msea.2011.11.061 ↗
8. The recrystallization and texture of magnesium–zinc–cerium alloys10.1016/j.scriptamat.2008.05.021 ↗
9. Effect of Al and Gd solutes on the strain rate sensitivity of magnesium alloys10.1007/s11661-009-0107-8 ↗
10. Role of RE in the deformation and recrystallization of Mg alloy and a new alloy design concept for Mg–RE alloys10.1016/j.scriptamat.2014.12.010 ↗
11. Explaining texture weakening and improved formability in magnesium rare earth alloys10.1179/1743284714Y.0000000632 ↗
12. Mechanical anisotropy and deep drawing behaviour of AZ31 and ZE10 magnesium alloy sheets10.1016/j.actamat.2009.09.038 ↗
13. Influence of Zn concentration on stretch formability at room temperature of Mg–Zn–Ce alloy10.1016/j.msea.2010.09.081 ↗
14. Superior light metals by texture engineering: optimized aluminum and magnesium alloys for automotive applications10.1016/j.actamat.2012.10.044 ↗
15. Triggering rare earth texture modification in magnesium alloys by addition of zinc and zirconium10.1016/j.actamat.2013.12.015 ↗
16. Excellent room-temperature ductility and formability of rolled Mg–Gd–Zn alloy sheets10.1016/j.jallcom.2010.11.141 ↗
17. Room-temperature ductility and anisotropy of two rolled Mg–Zn–Gd alloys10.1016/j.msea.2010.02.038 ↗
18. Texture evolution in Mg-Zn-Ca alloy sheets10.1007/s11661-013-1674-2 ↗
19. Effects of Ca on tensile properties and stretch formability at room temperature in Mg-Zn and Mg-Al alloys10.2320/matertrans.M2011048 ↗
20. Microstructures and tensile properties of a twin roll cast and heat-treated Mg–2.4Zn–0.1Ag–0.1Ca–0.1Zr alloy10.1016/j.scriptamat.2010.10.031 ↗
21. Effects of zinc concentration on the stretch formability at room temperature of the rolled Mg-Zn-Ca alloys10.2320/jinstmet.75.35 ↗
22. Texture weakening and ductility variation of Mg–2Zn alloy with Ca or RE addition10.1016/j.msea.2015.08.025 ↗
23. Calcium and zirconium as texture modifiers during rolling and annealing of magnesium–zinc alloys10.1016/j.matchar.2015.02.002 ↗
24. Comparison of static recrystallization behavior in hot rolled Mg–3Al–1Zn and Mg–3Zn–0.5Ca sheets10.1016/j.jallcom.2013.11.210 ↗
25. The nucleation of recrystallization at second phase particles in deformed aluminium10.1016/0001-6160(77)90109-2 ↗
26. The effect of Mn and Zr dispersoid-forming additions on recrystallization resistance in Al–Cu–Li AA2198 sheet10.1016/j.actamat.2014.05.028 ↗
27. Associations between spherical particles of two dissimilar phases10.1007/BF02403060 ↗
28. Tensile-compressive yield asymmetries in high strength wrought magnesium alloys10.1016/0956-716X(94)90159-7 ↗
29. Magnesium research: scientific challenges10.1179/106678509X12489506475430 ↗
30. The texture and anisotropy of magnesium–zinc–rare earth alloy sheets10.1016/j.actamat.2006.11.013 ↗
31. Effect of composition on the texture and deformation behaviour of wrought Mg alloys10.1016/j.scriptamat.2007.09.054 ↗
32. Humphreys · 2004
33. The internal mechanism of cold-work and recrystallization in cupro-nickel
34. On the origin of recrystallization textures in aluminium10.1016/0956-7151(91)90225-P ↗
35. Investigation of structure and texture development during annealing of low-carbon steel10.1179/mst.1986.2.8.807 ↗
36. Deformation structures and textures in cold-rolled 70:30 brass10.1179/030634578790433909 ↗
37. Shear band-related recrystallization and grain growth in two rolled magnesium-rare earth alloys10.1016/j.msea.2013.04.076 ↗
38. The origin of “rare earth” texture development in extruded Mg-based alloys and its effect on tensile ductility10.1016/j.msea.2008.05.045 ↗
39. Microstructure and texture evolution of Mg alloys during twin-roll casting and subsequent hot rolling10.1016/j.scriptamat.2009.12.010 ↗
40. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys10.1016/j.actamat.2010.08.031 ↗
41. Role of solute in the texture modification during hot deformation of Mg-rare earth alloys10.1007/s11661-011-0923-5 ↗
42. Deformation microstructures and textures of some cold rolled Mg alloys10.1016/S0921-5093(04)00942-6 ↗
43. Microstructural development during hot working of Mg-3Al-1Zn10.1007/s11661-007-9207-5 ↗
44. Mechanisms of exceptional ductility of magnesium single crystal during deformation at room temperature: multiple twinning and dynamic recrystallization10.1016/j.actamat.2014.04.066 ↗
45. Softening and dynamic recrystallization in magnesium single crystals during c-axis compression10.1016/j.actamat.2011.10.013 ↗
46. Plasticity of magnesium crystals
47. Effect of twinning on recrystallisation textures in deformed magnesium alloy AZ3110.1080/14786435.2011.588613 ↗
48. Texture weakening and static recrystallization in rolled Mg–2.9Y and Mg–2.9Zn solid solution alloys10.1007/s10853-012-6440-0 ↗
49. Promotion of texture weakening in magnesium by alloying and thermomechanical processing: (I) alloying10.1007/s10853-013-7826-3 ↗
50. Orientational analysis of static recrystallization at compression twins in a magnesium alloy AZ3110.1016/j.msea.2009.03.045 ↗
51. Dynamic recrystallization during high temperature deformation of magnesium10.1016/j.msea.2008.02.004 ↗
52. Grain Boundary Migration in Metals: thermodynamics, Kinetics
53. Texture development in pure Mg and Mg alloy AZ3110.4028/www.scientific.net/MSF.495-497.623 ↗
54. Texture enhancement during grain growth of magnesium alloy AZ31B10.1016/j.actamat.2014.12.009 ↗
55. The origin and enhancement of texture during heat treatment of rolled AZ31B magnesium alloys10.1016/j.actamat.2015.04.043 ↗
56. Twinning and detwinning during compression–tension loading measured by quasi in situ electron backscatter diffraction tracing in Mg–3Al–Zn rolled sheet
57. EBSD study on deformation twinning in AZ31 magnesium alloy during quasi-in-situ compression10.1002/adem.200800111 ↗
58. Texture evolution during cold rolling of dilute Mg alloys10.1016/j.scriptamat.2015.06.009 ↗
59. Combined in-situ SEM annealing and EBSD of deformed materials10.1155/TSM.26-27.281 ↗
60. A study of recrystallization in single-phase aluminium using in-situ annealing in the scanning electron microscope10.1111/j.0022-2720.2004.01300.x ↗
61. The effect of solutes on grain boundary mobility during recrystallization and grain growth in some single-phase aluminium alloys10.1016/j.matchemphys.2011.11.018 ↗
62. Grain boundary mobilities during recrystallization of Al–Mn alloys as measured by in situ annealing experiments10.1016/j.msea.2005.05.010 ↗
63. Development of <101¯0> texture in Mg alloys during cold deformation
64. Influence of deformation twinning on static annealing of AZ31 Mg alloy10.1016/j.actamat.2013.06.037 ↗
65. Segregation and clustering of solutes at grain boundaries in Mg–rare earth solid solutions10.1016/j.actamat.2014.06.004 ↗
66. Solute clustering and grain boundary segregation in extruded dilute Mg–Gd alloys10.1016/j.scriptamat.2014.08.022 ↗
67. Effect of rare-earth additions on the texture of wrought magnesium alloys: the role of grain boundary segregation10.1007/s11661-013-1950-1 ↗
68. Solute segregation and texture modification in an extruded magnesium alloy containing gadolinium10.1016/j.scriptamat.2011.08.012 ↗
69. Periodic segregation of solute atoms in fully coherent twin boundaries10.1126/science.1229369 ↗
70. The effect of solute atoms on the energy and structure of grain boundaries10.1016/0001-6160(77)90237-1 ↗
71. The impurity-drag effect in grain boundary motion10.1016/0001-6160(62)90092-5 ↗
72. Solute segregation and precipitation in a creep-resistant Mg–Gd–Zn alloy10.1016/j.actamat.2008.08.025 ↗