Near-threshold fatigue crack behaviour in EUROFER 97 at different temperatures
Source abstract
Abstract
Abstract The fatigue crack behaviour in EUROFER 97 was investigated at room temperature (RT), 300, 500 and 550 °C for the assessment of cracks in first wall structures built from EUROFER 97 of future fusion reactors. For this purpose, fatigue crack growth tests were performed using CT specimens with two R -ratios, R = 0.1 and R = 0.5 ( R is the load ratio with R = F min / F max where F min and F max are the minimum and maximum applied loads within a cycle, respectively). Hence, fatigue crack threshold, fatigue crack growth behaviour in the near-threshold range and their dependences on temperature and R -ratio were determined and described using an analytical formula. The fatigue crack threshold showed a monotonous dependence on temperature which is for R = 0.5 insignificantly small. The fatigue crack growth behaviour exhibited for R = 0.1 a non-monotonous dependence on temperature which is explained by the decrease of yield stress and the increase of creep damage with increasing temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. van der Schaaf · Fus. Eng. Des. · 2003 · 69 · 19710.1016/S0920-3796(03)00337-5 ↗
2. Diegele · Fus. Eng. Des. · 1995 · 27 · 21010.1016/0920-3796(94)00333-3 ↗
3. M. Schirra, A. Falkenstein, P. Graf, S. Herger, H. Kempe, R. Lindau, H. Zimmermann, Ergebnisse von Charakterisierungsuntersuchungen zu physikalischen und mechanischen Eigenschaften des martensitischen 9% Cr-Stahls EUROFER 97, Forschungszentrum Karlsruhe, Report FZKA 6707, 2002.
4. Schneider · Berg- und Hüttenmännische Monatshefte (BHM) · 2000 · 145 · 199
5. K. Heckel, Einführung in die technische Anwendung der Bruchmechanik, Hanser Studien Bücher, 1970.
6. Johnson · Mater. Res. Stand. · 1965 · 442
7. Schwalbe · 1980
8. H. Lange, Rissausbreitung im Stahl AISI 316 L bei erhöhter Temperatur unter stati-scher und zyklischer Belastung, Forschungszentrum Karlsruhe, Report KFK 4823, 1991.
9. Saxena · 1996 · vol. 19 · 168
10. Tavassoli · J. Nucl. Mater. · 2004 · 329–333 · 25710.1016/j.jnucmat.2004.04.020 ↗
11. Lindau · Fus. Eng. Des. · 2001 · 58&59 · 78110.1016/S0920-3796(01)00562-2 ↗
12. Liaw · Acta Met. · 1985 · 33 · 148910.1016/0001-6160(85)90050-1 ↗
13. Liaw · Acta. Met. · 1983 · 31 · 158110.1016/0001-6160(83)90155-4 ↗
14. A.E. Carden, Parametric analysis of fatigue crack growth, paper C324/73, in: International Conference on Creep and Fatigue in Elevated Temperature Applications, American Society of Mechanical Engineers, 1973.