OEDGE modeling of the DIII-D H-mode 13CH4 puffing experiment

Use of carbon in tokamaks leads to a serious tritium retention issue due to co-deposition. To further investigate the processes involved, a detached ELMy H-mode (6.5 MW NBI) experiment was performed on DIII-D in which {sup 13}CH{sub 4} was puffed into the main vessel through the toroidally symmetric pumping plenum at the top of lower single-null discharges. Subsequently, the {sup 13}C content of tiles taken from the vessel wall was measured. The interpretive OEDGE code was used to model the results. The {sup 13}C deposition pattern could be reproduced, in general shape and magnitude, by assuming in the code the existence of a parallel flow and a radial pinch in the scrape-off layer. Parallel flows of Mach {approx} 0.3 toward the inner divertor and a radial pinch {approx}10 to 20 m/s (+ R-direction) were found to yield {sup 13}C deposition comparable to the experiment.