Design of a twinning-induced plasticity high entropy alloy
Source abstract
Abstract
Abstract We introduce a liquid metallurgy synthesized, non-equiatomic Fe 40 Mn 40 Co 10 Cr 10 high entropy alloy that is designed to undergo mechanically-induced twinning upon deformation at room temperature. Microstructure characterization, carried out using SEM, TEM and APT shows a homogeneous fcc structured single phase solid solution in the as-cast, hot-rolled and homogenized states. Investigations of the deformation substructures at specific strain levels with electron channeling contrast imaging (ECCI) combined with EBSD reveal a clear change in the deformation mechanisms of the designed alloy starting from dislocation slip to twinning as a function of strain. Such twinning induced plasticity has only been observed under cryogenic conditions in the equiatomic FeMnNiCoCr high entropy alloy. Thus, despite the decreased contribution of solid solution strengthening, the tensile properties of the introduced lean alloy at room temperature are found to be comparable to that of the well-studied five component FeMnNiCoCr system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Nanostructured HEA with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Novel multicomponent amorphous alloys10.4028/www.scientific.net/MSF.386-388.27 ↗
4. Multicomponent and high entropy alloys10.3390/e16094749 ↗
5. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
6. On the elemental effect of AlCoCrCuFeNi high-entropy alloy system10.1016/j.matlet.2006.03.140 ↗
7. Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behaviour in aqueous environments10.1016/j.corsci.2008.04.011 ↗
8. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys10.1016/j.actamat.2013.01.042 ↗
9. High entropy alloys and their development as structural materials10.1179/1743284714Y.0000000749 ↗
10. Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy10.1038/ncomms6964 ↗
11. Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
12. Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2013.10.237 ↗
13. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
14. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility10.1016/j.scriptamat.2013.09.030 ↗
15. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application10.1016/S0749-6419(00)00015-2 ↗
16. Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels10.1016/j.scriptamat.2012.08.038 ↗
17. Composition dependence of phase stability, deformation mechanisms, and mechanical properties of the CoCrFeMnNi high-entropy alloy system10.1007/s11837-014-1133-6 ↗
18. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
19. Revealing the strain-hardening behavior of twinning-induced plasticity steels: theory, simulations, experiments10.1016/j.actamat.2012.09.064 ↗
20. Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
21. Rapid alloy prototyping: compositional and thermo-mechanical high throughput bulk combinatorial design of structural materials based on the example of 30Mn–1.2C–xAl triplex steels10.1016/j.actamat.2012.05.017 ↗
22. Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe–Mn–Al–C steel10.1016/j.actamat.2012.07.018 ↗
23. Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy10.1007/s11837-013-0771-4 ↗
24. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
25. Phase evolution and densification behavior of nanocrystalline multicomponent high entropy alloys during spark plasma sintering10.1007/s11837-013-0759-0 ↗
26. Criterion for sigma phase formation in Cr- and V-containing high-entropy alloys10.1080/21663831.2013.831382 ↗
27. Intermetallics, interstitial compounds and metallic glasses in high-entropy alloys
28. Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography10.1016/j.actamat.2013.04.059 ↗
29. A novel approach to measure grain boundary segregation in bulk polycrystalline materials in dependence of the boundaries’ five rotational degrees of freedom10.1016/j.scriptamat.2014.02.016 ↗
30. Integrated experimental-simulation analysis of stress and strain partitioning in multiphase alloys10.1016/j.actamat.2014.07.071 ↗
31. Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations10.1016/j.ijplas.2014.06.004 ↗
32. Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal10.1016/j.ijplas.2008.01.002 ↗
33. Electron channeling contrast imaging of twins and dislocations in twinning-induced plasticity steels under controlled diffraction conditions in a scanning electron microscope10.1016/j.scriptamat.2009.06.018 ↗
34. Coupling of electron channeling with EBSD: toward the quantitative characterization of deformation structures in the SEM10.1007/s11837-013-0678-0 ↗
35. Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation10.1016/j.actamat.2010.09.042 ↗
36. Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: a pathway to ductile martensite10.1016/j.actamat.2013.06.055 ↗
37. Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: example of a 9wt.% medium Mn steel10.1016/j.actamat.2014.12.021 ↗
38. Quantitative binomial distribution analyses of nanoscale like-solute atom clustering and segregation in atom probe tomography data10.1002/jemt.20582 ↗
39. Structure of rapidly quenched, (Cu0.5Zr0.5)100−xAgx alloys (x=0–40at.%10.1016/j.jallcom.2014.04.047 ↗
40. Grain boundary segregation engineering in metallic alloys: a pathway to the design of interfaces10.1016/j.cossms.2014.06.002 ↗
41. Deformation twinning
42. A theory of dislocation cell formation based on stochastic dislocation dynamics10.1016/1359-6454(95)00364-9 ↗
43. Analysis of large dislocation populations in deformed metals
44. Evaluation of slip patterns observed in associated with deformation twins in Mo-35 at% Re alloy10.1088/0305-4608/2/1/006 ↗
45. Intra-and intergranular heterogeneities in the plastic deformation of brass during rolling10.1016/0956-7151(90)90303-X ↗
46. The effect of grain size and grain orientation on deformation twinning in a Fe–22wt.% Mn–0.6wt.% C TWIP steel10.1016/j.msea.2010.02.041 ↗
47. New developments of computer-aided crystallographic analysis in transmission electron microscopy10.1107/S0021889899010894 ↗
48. The formation of ferrite and sigma phase in some austenitic stainless steels10.1016/0001-6160(68)90039-4 ↗
49. Significant hardening due to the formation of a sigma phase matrix in a high entropy alloy10.1016/j.intermet.2012.09.022 ↗
50. Segregation and migration of species in the CrCoFeNi high entropy alloy10.1016/j.jallcom.2014.01.135 ↗
51. Structural and magnetic ground-state properties of γ-FeMn alloys from ab initio calculations10.1103/PhysRevB.84.104423 ↗
52. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
53. Rajasekhara · Development of stainless steels with superior mechanical properties: a correlation between structure and properties in nanoscale/sub-micron grained austenitic stainless steel · 2011 · 371
54. Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy10.1016/j.actamat.2013.11.049 ↗
55. Segregation of solute atoms to stacking faults10.1143/JPSJ.17.322 ↗
56. Impact of nanodiffusion on the stacking fault energy in high-strength steels10.1016/j.actamat.2014.04.062 ↗
57. Polyslip in polycrystals10.1016/0001-6160(58)90117-2 ↗
58. Concepts for integrating plastic anisotropy into metal forming simulations10.1002/1527-2648(200204)4:4<169::AID-ADEM169>3.0.CO;2-G ↗