Leaching behaviour of Cs, Sr, and Eu nitrates from Fe-rich polymers: Influence of precursor composition, presence of CeO2 nanoparticles, and the effect of high-dose gamma irradiation
Source abstract
Abstract
• The leaching behaviour of structural elements (Fe, Na, Al) and simulated radionuclides (Cs, Sr, Eu, Ce) varied across samples made with different slag compositions • The presence of Al in the precursor slag increased the retaining ability of Cs and Na of the AAMs • The incorporation of CeO₂ nanoparticles altered leaching patterns by reducing iron release and europium release in different AAM samples • Mobility of Na and Eu is specifically increased after gamma irradiation, whereas Fe, Al, Cs, and Sr are better retained inside the Fe-rich AAMs The long half-lives and potential impact of environmental contamination of radionuclides in liquid nuclear waste make radioactive waste management a major concern for society and the nuclear industry. One prospective solution for efficiently immobilising liquid nuclear waste is the use of Alkali-Activated Materials (AAMs). The immobilisation ability of AAMs largely depends on their composition and the effect of the introduced radionuclides on the structure itself. The purpose of this work is to investigate the leaching behaviour of radioactive simulants such as strontium (Sr), caesium (Cs), and europium (Eu) nitrates from iron-rich slag-derived AAM samples, explore the impact of CeO 2 nanoparticles` presence, as well as the effects of gamma irradiation on the structure and leachability of the contaminants. CeO 2 nanoparticles are investigated for preconcentrating radionuclides from liquid nuclear waste and have been previously used in isolating and adsorbing Eu 3+ . Samples received a cumulative dose of 6.51 MGy of radiation from a cobalt-60 ( 60 Co) source. Potential changes in mechanical characteristics and microstructure were investigated by SEM analysis and nanoindentation. The leaching tests revealed significant variability in the release of elements such as Fe, Na, Al, Cs, Sr, Eu, and Ce across different samples, influenced by the slag composition and the presence of CeO₂ nanoparticles. No appreciable variations were observed in the simulated radionuclides or structural element releases from the irradiated and non-irradiated samples. Irradiation did not affect the materials' hardness and had a limited effect on elastic modulus (E). From this perspective, the produced AAMs are suitable candidates for nuclear waste immobilisation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Radioactive element chemistry and processing · Nuclear materials and radiation effects · Chemical Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Radioactive waste (RAW) categories, characterization and processing route selection
2. Ehaviours of10.1557/PROC-1193-663 ↗
3. Vance · 2011
4. A review of the demonstration of innovative solvent extraction processes for the recovery of trivalent minor actinides from PUREX raffinate10.1524/ract.2012.1962 ↗
5. Neptunium 237 and americium: world inventories and proliferation concerns
6. Fast and selective preconcentration of europium from wastewater and coal soil by graphene oxide/silane@Fe3O4 dendritic nanostructure10.1021/acs.est.5b00182 ↗
7. Interaction between Eu(III) and graphene oxide nanosheets investigated by batch and extended X-ray absorption fine structure spectroscopy and by modeling techniques10.1021/es300720f ↗
8. Toward sustainable cementitious radioactive waste forms: immobilization of problematic operational wastes10.3390/su132111992 ↗
9. State of the art on geopolymer concrete10.1108/IJSI-05-2020-0050 ↗
10. Studies on fly ash-based geopolymer concrete
11. S.E. Wallah, B.V. Rangan, Low-calcium fly ash-based geoplymer concrete: long term properties, 2006.
12. Recycling of industrial wastewater by its immobilization in geopolymer cement10.1021/ie0616996 ↗
13. Why alkaline activation - 60 years of the theory and practice of alkali-activated materials
14. Provis · 2009
15. Incorporation of strontium and calcium in geopolymer gels10.1016/j.jhazmat.2019.121015 ↗
16. Co-immobilization of cesium and strontium containing waste by metakaolin-based geopolymer: microstructure, mineralogy and mechanical properties10.1016/j.jnucmat.2023.154639 ↗
17. Immobilization of cesium with alkali-activated blast furnace slag10.1016/j.jhazmat.2019.121765 ↗
18. Geopolymers and other alkali activated materials: why, how, and what?10.1617/s11527-013-0211-5 ↗
19. Mechanical and thermal properties of fly ash based geopolymers10.1016/j.conbuildmat.2017.11.023 ↗
20. Effects of gamma-ray irradiation on leaching of simulated 133Cs+ radionuclides from geopolymer wasteforms10.1016/j.jnucmat.2015.01.052 ↗
21. Immobilization of strontium-loaded zeolite A by metakaolin based-geopolymer10.1016/j.ceramint.2016.12.092 ↗
22. Stabilization of cesium in alkali-activated municipal solid waste incineration fly ash and a pyrophyllite-based system10.1016/j.chemosphere.2017.08.114 ↗
23. Leaching behavior of cesium, strontium, cobalt, and europium from immobilized cement matrix10.3390/app11188418 ↗
24. Alkali-activated materials for radionuclide immobilisation and the effect of precursor composition on Cs/Sr retention10.1016/j.jnucmat.2018.08.045 ↗
25. Geopolymers for immobilization of Cr6+, Cd2+, and Pb2+10.1016/j.jhazmat.2008.01.053 ↗
26. Radioactive metal isotopes stabilized in a geopolymer matrix: determination of a leaching extract by a radiotracer method10.1111/j.1551-2916.2006.01024.x ↗
27. Behaviour of aluminosilicate inorganic matrix SIAL during and after solidification of radioactive sludge and radioactive spent resins and their mixtures
28. Applicability of alkali activated slag-seeded Egyptian Sinai kaolin for the immobilization of 60Co radionuclide10.1016/j.jnucmat.2013.12.020 ↗
29. Contrasting immobilization behavior of Cs+ and Sr2+ cations in a titanosilicate matrix10.1039/c0jm03135f ↗
30. Radioactive wastewaters purification using titanosilicates materials: state of the art and perspectives10.1016/j.desal.2012.02.027 ↗
31. Incorporating Cs and Sr into blast furnace slag inorganic polymers and their effect on matrix properties10.1016/j.jnucmat.2018.02.023 ↗
32. Recovery of rare earth elements by nanometric CeO2embedded into electrospun PVA nanofibres10.1039/D1RA02097H ↗
33. Radon immobilization potential of alkali-activated materials containing ground granulated blast furnace slag and phosphogypsum10.1016/j.conbuildmat.2018.06.162 ↗
34. Piatak · 2015
35. Inorganic polymers made of fayalite slag: on the microstructure and behavior of Fe10.1111/jace.15420 ↗
36. Gamma radiation as a recycling tool for waste materials used in concrete10.5772/60435 ↗
37. The effect of high dose rate gamma irradiation on the curing of CaO-FexOy-SiO2 slag based inorganic polymers: mechanical and microstructural analysis10.1016/j.jnucmat.2020.152237 ↗
38. Mechanistic impacts of long-term gamma irradiation on physicochemical, structural, and mechanical stabilities of radiation-responsive geopolymer pastes10.1016/j.jhazmat.2020.124805 ↗
39. Investigating irradiation effects on metakaolin-based geopolymer10.1016/j.conbuildmat.2024.136837 ↗
40. H.A. Van der Sloot, J.C.L. Meeussen, A.C. Garrabrants, D..S. Kosson, M. Fuhrmann, Review of the physical and chemical aspects of leaching assessment, CBP-TR-2009-002, Rev. 0 (2009) 1–98.
41. Use of characterisation leaching tests and associated modelling tools in assessing the hazardous nature of wastes10.1016/j.jhazmat.2011.03.119 ↗
42. P. Zuloaga, C. Andrade, M. Castellote, Leaching of reinforced concrete vaults subjected to variable water content due to capillary suction created by seasonal temperature changes, RILEM work. Long-term perform. Cem. Barriers Reinf. Concr. Nucl. Power Plants, NUCPERF 2009 (2009) 3–11. https://digital.csic.es/handle/10261/234015.
43. European Commitee for Standardization, CENT/TS 16637-3:2016, Construction products. Assessment of release of dangerous substances. Horizontal up-flow percolation test, (2016) 60.
44. Upcycling of non-ferrous metallurgy slags: identifying the most reactive slag for inorganic polymer construction materials10.1016/j.resconrec.2019.104627 ↗
45. The effect of incorporating Cs, Sr and Eu nitrates on the matrix development of Fe-rich polymers10.1016/j.nucengdes.2025.113895 ↗
46. Size dependence of lattice parameter and electronic structure in CeO2 nanoparticles10.1021/acs.inorgchem.0c00506 ↗
47. Precipitation-redispersion of cerium oxide nanoparticles with poly (acrylic acid) : towards stable dispersions II - experimental III - the precipitation-redispersion phenomenon10.1021/la0513757 ↗
48. Development of geopolymer based sacrificial materials for GEN IV severe accident mitigation10.1016/j.jnucmat.2021.153024 ↗
49. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
50. Bibliographic and visualized analysis of geopolymer research and its application in heavy metal immobilization: a review10.1016/j.jenvman.2018.10.041 ↗
51. Geopolymer synthesis kinetics
52. Nano-structured iron(III)-cerium(IV) mixed oxide: synthesis, characterization and arsenic sorption kinetics in the presence of co-existing ions aiming to apply for high arsenic groundwater treatment10.1016/j.apsusc.2013.06.132 ↗
53. Influence of gamma ray irradiation on metakaolin based sodium geopolymer10.1016/j.jnucmat.2013.06.044 ↗
54. Overview of nuclear materials and nuclear corrosion science and engineering10.1533/9780857095343.1.31 ↗
55. Disappearance of oxygen in concrete under irradiation: the role of peroxides in radiolysis10.1016/S0008-8846(98)00138-0 ↗
56. Gamma-irradiation synthesis of iron oxide nanoparticles in the presence of PEO, PVP or CTAB10.1016/j.radphyschem.2015.11.019 ↗
57. Effect of ferrous ion concentration on the kinetics of radiation-induced iron-oxide nanoparticle formation and growth10.1039/C6CP05456K ↗
58. The fate of iron during the alkali-activation of synthetic (CaO-)FeOx-SiO2 slags: an Fe K-edge XANES study10.1111/jace.15354 ↗
59. Alkali-activation of CaO-FeOx-SiO2 slag: formation mechanism from in-situ X-ray total scattering10.1016/j.cemconres.2019.04.019 ↗
60. Environmental assessment of alkali-activated materials based on agro-industrial waste as alkaline activators through leaching tests10.1016/j.jenvman.2024.122265 ↗
61. Understanding the leaching behavior of inorganic polymers made of iron rich slags10.1016/j.jclepro.2019.117736 ↗
62. Geopolymers for nuclear waste immobilisation
63. Grid indentation analysis of composite microstructure and mechanics: principles and validation10.1016/j.msea.2006.05.125 ↗
64. H. Bückle, The science of hardness testing and its research applications, 1973.
65. A review on the mechanical properties of cement-based materials measured by nanoindentation10.1016/j.conbuildmat.2015.05.008 ↗
66. Coupling statistical indentation and microscopy to evaluate micromechanical properties of materials: application to viscoelastic behavior of irradiated mortars10.1016/j.cemconcomp.2018.09.008 ↗
67. Impact of gamma-ray irradiation on hardened white Portland cement pastes exposed to atmosphere10.1016/j.cemconres.2018.03.005 ↗
68. Leaching of monolithic and granular alkali activated slag-fly ash materials, as a function of the mixture design10.1016/j.wasman.2018.06.019 ↗
69. Effect of gamma irradiation on the mechanical properties of carbonation reaction products in mortar10.1617/s11527-022-02003-w ↗
70. Inorganic polymers from CaO-FeOx-SiO2 slag: the start of oxidation of Fe and the formation of a mixed valence binder10.3389/fmats.2019.00212 ↗
71. A. Peys, C.E. White, D. Olds, H. Rahier, B. Blanpain, Y. Pontikes, Molecular structure of CaO–FeOx–SiO2 glassy slags and resultant inorganic polymer binders, 2018. 10.1111/jace.15880.
72. Impact properties of geopolymeric concrete: a state-of-the-art review10.1088/1757-899X/284/1/012012 ↗