Effect of ultrasonic field on the friction and oxidation characteristics of FeCrAl coatings
Source abstract
Abstract
FeCrAl coatings were applied to the surface of F/M steel using ultrasonic vibration-assisted laser cladding (UVALC) technique. The introduction of an ultrasonic field refined the microstructure of the FeCrAl coating, enhancing its microhardness and the integrity of the oxide film at elevated temperatures. The increased hardness led to a shift in the wear mechanism from oxidation wear to abrasive wear. In high-temperature conditions, a finer microstructure of the coating resulted in a denser oxide layer, improving the tribological properties and oxidation resistance of the coating. Furthermore, high-temperature oxidation analysis revealed that the predominant oxides formed were Fe 2O 3 and Cr 2O 3.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. SSTAR: the US lead-cooled fast reactor (LFR)10.1016/j.jnucmat.2008.02.049 ↗
2. GEN-IV LFR development: status & perspectives10.1016/j.pnucene.2018.02.005 ↗
3. European lead fast reactor—ELSY10.1016/j.nucengdes.2011.03.029 ↗
4. Effect of Y2O3 content on microstructure and corrosion behavior of ZrO2 coatings in liquid Lead-Bismuth eutectic10.1016/j.matchemphys.2023.128392 ↗
5. Structural materials for Gen-IV nuclear reactors: challenges and opportunities10.1016/j.jnucmat.2008.08.044 ↗
6. Review of the studies on fundamental issues in LBE corrosion10.1016/j.jnucmat.2007.06.019 ↗
7. Screening of the FeCrAl LBE corrosion-resistant coatings: the effect of Cr and Al contents10.1016/j.surfcoat.2023.129477 ↗
8. Void swelling in high dose ion-irradiated reduced activation ferritic–martensitic steels10.1016/j.jnucmat.2015.03.050 ↗
9. Self-ordered defect structures in two model F/M steels under in situ ion irradiation10.1016/j.jnucmat.2014.01.048 ↗
10. Early stages of dissolution corrosion in 316L and DIN 1.4970 austenitic stainless steels with and without anticorrosion coatings in static liquid lead-bismuth eutectic (LBE) at 500 °C10.1016/j.matchar.2021.111234 ↗
11. Oxidation and dissolution behavior of FeCrNiAl based high entropy alloy and alumina-forming austenitic steel exposed to lead-bismuth eutectic (LBE)10.1016/j.corsci.2023.111693 ↗
12. In-situ study on factors impeding dislocation motion in Fe9Cr1.5W0.4Si F/M steel during high temperature heating10.1016/j.msea.2023.145964 ↗
13. Insights into the corrosion mechanism of a 12Cr F/M steel in oxygen-saturated liquid LBE10.1016/j.corsci.2023.111602 ↗
14. Corrosion behavior of ion-irradiated 12Cr2W2Mn F/M steel in liquid LBE
15. Corrosion behavior of heat-treated Fe–Al coated steel in lead–bismuth eutectic under loading10.1016/j.pnucene.2011.05.014 ↗
16. Al rich PVD protective coatings: a promising approach to prevent T91 steel corrosion in stagnant liquid lead
17. Effect of LBE corrosion on microstructure of amorphous Al2O3 coating by magnetron sputtering10.1016/j.surfcoat.2022.128598 ↗
18. Absolute radiation tolerance of amorphous alumina coatings at room temperature10.1016/j.ceramint.2021.09.013 ↗
19. Coatings on steels T91 and 316L in Lead-Bismuth eutectic environment
20. Lead-bismuth eutectic (LBE) corrosion behavior of AlTiN coatings at 550 and 600°C10.1016/j.jnucmat.2020.152280 ↗
21. Corrosion behavior of refractory TiNbZrMoV high-entropy alloy coating in static leadbismuth eutectic alloy: a novel design strategy of LBE corrosion-resistant coating?10.1016/j.surfcoat.2022.128884 ↗
22. Microstructure, mechanical properties and lead-bismuth eutectic corrosion behavior of (AlCrFeTiMo)NO and (AlCrFeTiNb)NO high entropy metal sublattice ceramic coatings10.1016/j.vacuum.2022.111774 ↗
23. Development of low-Cr ODS FeCrAl alloys for accident-tolerant fuel cladding10.1016/j.jnucmat.2017.12.035 ↗
24. Effect of molybdenum addition on oxidation behavior and secondary protection mechanism of FeCrAl coatings10.1016/j.matchar.2023.113221 ↗
25. Effect of Au-ions irradiation on microstructure and mechanical properties of FeCrAl coating10.1016/j.jmrt.2023.08.088 ↗
26. Corrosion behavior of the FeCrAl coating with different Cr and Al contents before and after Au-ions irradiation in stagnant LBE10.1016/j.corsci.2023.111590 ↗
27. Microstructure, oxidation and corrosion properties of FeCrAl coatings with low Al content prepared by magnetron sputtering for accident tolerant fuel cladding10.1016/j.jnucmat.2021.152966 ↗
28. Effect of molybdenum on the oxidation resistance of FeCrAl alloy in lower temperature (400°C) and higher temperature (1200°C) steam environments10.1016/j.corsci.2024.111870 ↗
29. Surface microstructures and properties of oxide-reinforced FeCrAl matrix composite coatings prepared by laser cladding on a ferritic-martensitic steel10.1016/j.jnucmat.2023.154345 ↗
30. Laser-clad FeCrAl/TiC composite coating on ferrite/martensitic steel: significant grain refinement and wear resistance enhancement induced by adding TiC10.1016/j.surfcoat.2023.129272 ↗
31. Microstructural control of FeCrAl alloys using Mo and Nb additions10.1016/j.matchar.2017.08.008 ↗
32. Improved LBE corrosion resistance of the FeCrAl coating by the addition of trace Si element
33. Microstructural evolution and anti-corrosion properties of laser cladded Ti based coating on Q235 steel10.1016/j.surfcoat.2024.130383 ↗
34. Microstructure and wear property of WMoTaNb refractory high entropy alloy coating by laser cladding10.1016/j.jmrt.2023.12.082 ↗
35. A novel strategy for promoting corrosion and wear resistance of Mg-Li alloys: Gradient eutectic high-entropy alloy coating induced by in-situ bidirectional diffusion
36. Microstructure evolution and properties of NiTiCrNbTax refractory high-entropy alloy coatings with variable Ta content
37. State-of-the-art review on the ultrasonic vibration assisted laser cladding (UVALC)10.1016/j.jmapro.2023.10.066 ↗
38. Ultrasonic vibration-assisted laser engineering net shaping of ZrO2-Al2O3 bulk parts: Effects on crack suppression, microstructure, and mechanical properties10.1016/j.ceramint.2017.11.013 ↗
39. Improving surface features of PEO coatings on titanium and titanium alloys with zirconia particles: a review
40. Microstructure and property of Ni/WC/La2O3 coatings by ultrasonic vibration-assisted laser cladding treatment10.1016/j.optlaseng.2019.105848 ↗
41. Effect of ultrasonic impact treatment on the microstructure and properties of laser cladded CoCrFeNiMox high entropy alloy coatings10.1016/j.surfcoat.2023.130243 ↗
42. The microstructure and high-temperature oxidation resistance of Si-rich Mo-Si-B coatings prepared by ultrasonic vibration assisted laser cladding10.1016/j.jallcom.2023.170175 ↗
43. Microstructure evolution and properties of in-situ ceramic particles reinforced Fe-based composite coating produced by ultrasonic vibration assisted laser cladding processing10.1016/j.surfcoat.2020.126445 ↗
44. Effect of ultrasonic vibration-assisted laser cladding frequency on the microstructure and properties of Fe-0.5C-15Cr alloy cladding layers10.1016/j.surfcoat.2024.130567 ↗
45. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
46. Synthesis and characterization of FeCoCrAlCu high-entropy alloy coating by laser surface alloying10.1016/j.surfcoat.2014.12.013 ↗
47. Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0.5Fe alloy with boron addition10.1007/s11661-004-0254-x ↗
48. Enhancing coating performance: design and characterization of a Ti-Al-Si-Cr-SiC system coating using ultrasonic and rare earth assisted laser cladding10.1016/j.matchar.2024.113823 ↗
49. Effect and action mechanism of ultrasonic assistance on microstructure and mechanical performance of laser cladding 316L stainless steel coating10.1016/j.surfcoat.2022.128122 ↗
50. Research on the construction of gradient nanostructure and anti-tribocorrosion behavior of aluminum alloy surface10.1016/j.triboint.2024.109448 ↗
51. Corrosion and tribo-corrosion behaviors of nano-lamellar Ni1.5CrCoFe0.5Mo0.1Nbx eutectic high-entropy alloy coatings: the role of dual-phase microstructure10.1016/j.corsci.2022.110305 ↗
52. Research on the mechanism of the two-dimensional ultrasonic surface burnishing process to enhance the wear resistance for aluminum alloy10.1007/s40544-021-0777-z ↗
53. The effect of grain refinement on the oxidation and phase transformation of alumina scale on Ni2Al3 coating
54. Exploring the impact of microstructure refinement on high temperature steam oxidation behavior of FeCrAl alloy
55. Insights into the role of grain refinement on high-temperature initial oxidation phase transformation and oxides evolution in high aluminium Fe-Mn-Al-C duplex lightweight steel10.1016/j.corsci.2017.07.002 ↗