Influence of the interpellet space to the Instant Release Fraction determination of a commercial UO2 Boiling Water Reactor Spent Nuclear Fuel
Source abstract
Abstract
The contact of the coolant with the fuel pin during irradiation produces a gradient of temperature in the fuel pellet that segregates the radionuclides (RN) depending on its volatility and reactivity. This segregation determines the Instant Release Fraction (IRF), an important source of radiological risk in the performance assessment (PA) of a Deep Geologic Repository (DGR). RN segregation was studied radially in previous papers. In the present work, it was studied axially, taking into special consideration the cutting position of the solid sample to be studied. Iodine and caesium were the RN with the highest release, while the contribution of rubidium, strontium, molybdenum and technetium to the IRF depended on their chemical state. The interpellet presence (known also as dishing) effect was clearly observed for caesium, increasing its release by one order of magnitude. According to these results, one of the major contributions to the IRF comes from the RN trapped in the dishing and has to be considered in the sampling and data interpretation that will be performed for the PA of the DGR.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Nuclear reactor physics and engineering · Radioactive element chemistry and processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. POSIVA · 2017
2. Astudillo · 2001
3. The high burn-up structure in nuclear fuel. REVIEW10.1016/S1369-7021(10)70221-2 ↗
4. Instant release fraction and matrix release of high burn-up UO2 spent nuclear fuel: effect of high burn-up structure and leaching solution composition10.1016/j.jnucmat.2012.04.036 ↗
5. Harms · 1975
6. Othman · 2004
7. Almenas · 1992
8. Instant release of fission products in leaching experiments with high-burnup nuclear fuels in the framework of the Euratom project first- nuclides10.1016/j.jnucmat.2016.10.048 ↗
9. Gap and grain boundaries inventories from pressurized water reactor spent fuels10.1016/j.jnucmat.2007.01.086 ↗
10. Rapid aqueous release of fission products from high burn-up LWR fuel: experimental results and correlations with fission gas release10.1016/j.jnucmat.2011.09.007 ↗
11. Wilson · 1990
12. Wilson · 1990
13. Corrosion of high burn-up structured UO2 fuel in presence of dissolved H210.1016/j.jnucmat.2009.07.004 ↗
14. Dynamic leaching studies of 48 MWd/kgU UO2 commercial spent nuclear fuel under oxic conditions10.1016/j.jnucmat.2011.03.020 ↗
15. Instant release fraction corrosion studies of commercial UO2 BWR spent nuclear fuel10.1016/j.jnucmat.2017.03.022 ↗
16. Analogous materials for studying spent nuclear fuel: the influence of particle size distribution on the specific surface area of irradiated nuclear fuel10.1016/j.apsusc.2008.04.091 ↗
17. Dissolution experiments of commercial PWR (52 MWd/kgU) and BWR (53 MWd/kgU) spent nuclear fuel cladded segments in bicarbonate water under oxidizing conditions. Experimental determination of matrix and instant release fraction10.1016/j.jnucmat.2015.05.012 ↗
18. Determination of the equilibrium formation constants of two U(VI)-peroxide complexes at alkaline pH10.1039/c0dt01672a ↗
19. 2012
20. Re-examining the dissolution of spent fuel: a comparison of different methods for calculating rates10.1557/PROC-824-CC2.4 ↗
21. Corrales · 2011