journal article·2022-01

Relative oxygen potential measurements of (U,Pu)O2 with Pu = 0.45 and 0.68 and related defect formation energy

Shun Hirooka, Taku Matsumoto, Takeo Sunaoshi, Tetsushi Hino

Publisher page

Abstract

Abstract Using a thermogravimetric analyzer and an oxygen sensor, relative oxygen potentials of mixed oxide (MOX) fuels with Pu contents of 45% and 68% were measured at 1473 K – 1873 K; the relative oxygen potentials provide the relation among the equilibrium oxygen-to-metal (O/M) ratio, temperature, and oxygen partial pressure of the flowing gas. To evaluate the effect of the Pu content on the relative oxygen potential of MOX and related defect formation energy, this work aims to bridge the gap in the results available in existing reports, where Pu contents of 0%-46% and 100% have been studied [1] , [2] , [3] , [4] , [5] , [6] , [7] , [8] , [9] , [10] , [11] . The measured data indicate that the trend of increasing relative oxygen potential with increasing Pu content, which can occur as a consequence of more Pu cations changing from being tetravalent to trivalent, reaches a saturation at a Pu content of 68%, in particular in the region of O/M
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Nuclear reactor physics and engineering · Radioactive element chemistry and processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Oxygen potential of (U0.88Pu0.12)O2±x and (U0.7Pu0.3)O2±x at high temperatures of 1673–1873K10.1016/j.jnucmat.2011.01.042 ↗
2. Measurement of oxygen potential of (U0.8Pu0.2)O2±x at 1773 and 1873K, and its analysis based on point defect chemistry10.1016/j.calphad.2011.02.007 ↗
3. Analysis of oxygen potential of (U0.7Pu0.3)O2±x and (U0.8Pu0.2)O2±x based on point defect chemistry10.1016/j.jnucmat.2009.01.023 ↗
4. Oxygen potentials of plutonia and urania-plutonia solid solution10.1016/0022-3115(81)90212-9 ↗
5. Chemical potential of oxygen in (U, Pu) mixed oxide with Pu/(U+Pu) = 0.4610.1016/j.jnucmat.2016.02.020 ↗
6. Oxygen potentials, oxygen diffusion coefficients and defect equilibria of nonstoichiometric (U,Pu)O2±x10.1016/j.jnucmat.2017.01.056 ↗
7. Influences of Am and Np on oxygen potentials of MOX fuels10.1016/j.calphad.2011.06.002 ↗
8. Oxygen potential measurement of (U,Pu,Am)O2±x and (U,Pu,Am,Np)O2±x10.1016/j.jnucmat.2020.152424 ↗
9. Oxygen potentials of PuO2-x10.1557/opl.2012.1162 ↗
10. Oxygen potential measurement of (Pu0.928Am0.072)O2–x at high temperatures10.1080/00223131.2014.986243 ↗
11. Defect chemistry and basic properties of non-stoichiometric PuO210.4028/www.scientific.net/DDF.375.57 ↗
12. On the interpretation of chemical potentials computed from equilibrium thermodynamic codes10.1016/j.jnucmat.2015.04.004 ↗
13. Kubaschewski · 1979
14. TAD-ID: an international thermodynamic database for nuclear fuels applications10.1016/j.calphad.2020.102212 ↗
15. High temperature electrical conductivity and conduction mechanism of (U,Pu)O2±x at low oxygen partial pressures10.1016/0022-3115(93)90038-Z ↗
16. Electrical conductivity and defect structure of (U,Pu)O2±x10.1016/0022-3115(89)90551-5 ↗
17. Laboratory measurement of the heat capacity of Urania up to 8000 K: I. Experiment10.13182/NSE93-A23990 ↗
18. Analytical expressions for enthalpy and heat capacity for uranium-plutonium oxide10.1016/0022-3115(74)90152-4 ↗
19. Measurement and interpretation of the thermo-physical properties of UO2 at high temperatures10.1016/j.actamat.2017.07.060 ↗
20. A review of the thermophysical properties of MOX and UO2 fuels10.1016/S0022-3115(01)00692-4 ↗
21. Thermophysical properties and oxygen transport in the (Ux,Pu1−x)O2 lattice10.1016/j.jnucmat.2015.03.024 ↗
22. A new heat capacity law for UO2, PuO2 and (U,Pu)O2 derived from molecular dynamics simulations and useable in fuel performance codes
23. A many-body potential approach to modelling the thermomechanical properties of actinide oxides
24. On the melting behaviour of uranium/plutonium mixed dioxides with high-Pu content: a laser heating study10.1016/j.jnucmat.2011.08.028 ↗
25. Recent advances in the study of the UO2–PuO2 phase diagram at high temperatures10.1016/j.jnucmat.2014.02.029 ↗
26. The solid-liquid phase diagram for the UO2-PuO2 system10.1016/0022-3115(67)90051-7 ↗
27. Aitken · 1968
28. Solidus and liquidus temperatures in the UO2-PuO2 system10.1016/j.jnucmat.2007.06.002 ↗
29. Solidus and liquidus of plutonium and uranium mixed oxide10.1016/j.jallcom.2007.01.183 ↗
30. Diffuse transition and melting in fluorite and antifluorite type of compounds. Heat content of potassium sulfide from 298 to 1260.degree.K10.1021/j100850a035 ↗