Fission gas release in the micro-cell fuel pellet under normal operating conditions: A simplified approach based on UO2 pellet experience

Abstract Following the Fukushima accident in March 2011, Korea Atomic Energy Research Institute (KAERI) has developed micro-cell fuel pellets for the purpose of reducing gas release, both stable and radioactive, not only under accident conditions, but during normal operation as well. The micro-cell pellet is composed of many cells covered with a ceramic or metallic wall material, whose function is either to lower or block the movement of gas atoms out of the cells, thereby reducing gas release out of the pellet. Based on both a Halden irradiation test of the micro-cell pellets up to 16 MWd/kgU and experience of fission gas release (FGR) in the conventional UO2 pellet, a simplified approach is proposed to estimate FGR in the micro-cell pellets when it is irradiated with a constant linear power of 30 kW/m up to 60 MWd/kgU under normal operating conditions. Considering the lack of measured data on diffusivity in the micro-cell pellets, sensitivity studies for FGR were performed for two cases: diffusivity in the micro-cell pellet is the same as and 10 times higher than in the UO2 pellet, respectively. Even for the 10 times higher diffusivity, FGR in the ceramic micro-cell pellet is at least comparable to or lower than in the UO2 pellet, and FGR in the metallic micro-cell pellet is clearly lower than in the UO2 pellet, due to its lower fuel temperature and the impact of its walls on gas movement. In real situations, the degree of reduction of FGR in the micro-cell pellets would be determined by the fraction of perfect walls and the magnitude of gas diffusivity. Until PIE results become available for the irradiated micro-cell pellets, the current approach provides only rough estimates and therefore its results need to be taken as preliminary.