Manufacturing and characterization of Ni-free N-containing ODS austenitic alloy
Source abstract
Abstract
Abstract Ni-free N-containing oxide dispersion strengthened (ODS) austenitic alloys were manufactured by mechanical alloying (MA) followed by spark plasma sintering (SPS). The phase evolutions during milling under a nitrogen atmosphere and after sintering were studied by X-ray diffraction (XRD). Transmission electron microcopy (TEM) and alloy contrast variation analysis (ACV), including small-angle neutron scattering (SANS) and ultra-small-angle X-ray scattering (USAXS), revealed the existence of nanoparticles with a diameter of 3–51 nm for the samples sintered at 950 °C. Sintering at 1000 °C for 5 and 15 min caused slight growth and a significant coarsening of the nanoparticles, up to 70 nm and 128 nm, respectively. The ACV analysis indicated the existence of two populations of Y2O3, e-martensite and MnO. The dispersive X-ray spectrometry (EDS) confirmed two kinds of nanoparticles, Y2O3 and MnO. The material was characterized by superior micro-hardness, of above 500 HV0.1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Structural materials for Gen-IV nuclear reactors : challenges and opportunities10.1016/j.jnucmat.2008.08.044 ↗
2. Reverse phase transformation from α to γ in 9Cr-ODS ferritic steels10.1016/j.jnucmat.2010.12.250 ↗
3. Microstructural observation and tensile properties of ODS-304 austenitic steel10.1016/j.msea.2012.08.099 ↗
4. Mihalache · 2014 · 1
5. A new method for the quantitative analysis of the scale and composition of nanosized oxide in 9Cr-ODS steel10.1016/j.actamat.2009.07.054 ↗
6. Application of image analysis for characterization of powders
7. The design and q resolution of the small and wide angle neutron scattering instrument (TAIKAN) in J-PARC
8. Ultra-small-angle x-ray scattering at the advanced Photon source10.1107/S0021889809008802 ↗
9. Irena: tool suite for modeling and analysis of small-angle scattering10.1107/S0021889809002222 ↗
10. Glassy carbon as an absolute intensity calibration standard for small-angle scattering10.1007/s11661-009-9950-x ↗
11. Characterization of nanostructured high nitrogen Fe–18Cr–xMn–4Mo austenitic stainless steel prepared by mechanical alloying10.1016/j.msea.2011.11.059 ↗
12. Structural evolution during mechanical alloying of stainless steels under nitrogen10.1016/j.powtec.2011.10.012 ↗
13. Effect of milling time on structure and mechanical properties of porous nickel-free austenitic stainless steels processed by mechanical alloying and sintering10.1016/j.msea.2010.05.008 ↗
14. Investigation of ?? to ?? transformation in the production of a nanostructured high-nitrogen austenitic stainless steel powder via mechanical alloying10.1016/j.msea.2008.12.033 ↗
15. Suryanarayana · Mechanical alloying and milling suryanaraya · 2001 · 46
16. Nitriding of Fe–18Cr–8Mn stainless steel powders by mechanical alloying method with dual nitrogen source10.1016/j.powtec.2016.02.048 ↗
17. Effect of mechanical alloying and consolidation process on microstructure and hardness of nanostructured Fe – Cr – Al ODS alloys10.1016/j.msea.2011.08.041 ↗
18. Structure and mechanical properties of high-manganese steels10.1016/B978-0-08-096532-1.00216-8 ↗
19. Angular distortive matrices of phase transitions in the fcc-bcc-hcp system10.1016/j.actamat.2016.01.075 ↗
20. Spark plasma sintering of nitrogen-containing nickel-free stainless steel powders and effect of sintering temperature10.1016/j.jallcom.2009.05.075 ↗
21. Structural evolution of oxide dispersion strengthened austenitic powders during mechanical alloying and subsequent consolidation10.1016/j.powtec.2014.12.008 ↗
22. Ferritic oxide dispersion strengthened alloys by spark plasma sintering10.1016/j.jnucmat.2013.07.019 ↗
23. Functional properties of a spark plasma sintered ultrafine-grained 316L steel10.1016/j.matdes.2014.06.053 ↗
24. Microstructural changes upon annealing in ODS-strengthened ultrafine grained ferritic steel10.1007/s10853-013-7255-3 ↗
25. Influence of HIP pressure on tensile properties of a 14Cr ODS ferritic steel10.1016/j.fusengdes.2014.01.052 ↗
26. Mechanical properties and thermal stability of nanostructured ODS RAF steels10.1016/j.mechmat.2013.07.006 ↗
27. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
28. Effects of milling process and alloying additions on oxide particle dispersion in austenitic stainless steel10.1016/j.jnucmat.2014.01.025 ↗
29. Annealing behavior of ferritic-martensitic 9%Cr-ODS-Eurofer steel10.1016/j.msea.2010.02.051 ↗