Creep and precipitation behaviors of AL6XN austenitic steel at elevated temperatures

Abstract Creep behaviors of the solution-treated AL6XN austenitic stainless steel have been investigated at 873–1023 K and 120–260 MPa. The results showed that the creep stress exponent and activation energy of the AL6XN steel are 5 and 395.4 kJ/mol, respectively in the power–law breakdown regime. TEM observations revealed that dislocations distributed homogenously in grains. The creep deformation mechanism is mainly attributed to viscous dislocation glide. Precipitates in the steel after creep deformation were additionally analyzed by TEM, and the results showed that there are four different types of precipitates, such as M 23 C 6 , M 6 C, σ phase and Laves phase. The M 23 C 6 carbides were observed at grain boundaries in the steel after creep at 873 K. The M 6 C, σ phase and Laves phase precipitates were found when the creep temperature increases to 923–1023 K. Although the AL6XN steel exhibited low steady state creep rates, a high volume fraction of brittle precipitates of σ and Laves phases reduced the creep lifetime of the steel at elevated temperatures.