Effects of iron content in Ni Cr Fe alloys on the oxide films formed in an oxygenated simulated PWR water environment
Source abstract
Abstract
Abstract The iron content in Ni Cr Fe alloys strongly affected the properties of oxide films after 1012 h of immersion in an oxygenated simulated PWR primary water environment at 310 °C. Increasing the iron content in the alloy increased the porosity and thickness of the outer layer and the inner layer. Increasing the iron content in the alloy increased the amount of spinel needle-like oxides and decreased the amount of NiO particles in the outer layer. Cellular oxide in the inner layer was nickel-rich in the center and chromium-rich at the edge.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Corrosion in the nuclear power industry
2. Long range ordering of Alloy 690
3. Effect of alloying elements on the stability of Ni2M in Alloy 690 based upon thermodynamic calculation10.3323/jcorr.61.105 ↗
4. A study of the effects of phosphorus content, cold rolling and heat treatment on the kinetics of ordering in Ni2Cr alloys10.1007/BF00551469 ↗
5. Characterization of oxide films formed on Alloy 600 and Alloy 690 in simulated PWR primary water by using hard X-ray photoelectron spectroscopy10.1007/s10008-015-2817-8 ↗
6. Influence of dissolved oxygen concentration on the oxide film formed on Alloy 690 in high temperature water10.1016/j.corsci.2012.12.003 ↗
7. Effect of water chemistry on the oxide film on Alloy 690 during simulated hot functional testing of a pressurised water reactor10.1016/j.corsci.2012.01.002 ↗
8. Influence of later-dissolved oxygen on microstructural changes in oxide films formed on Alloy 690TT in hydrogenated primary water10.1016/j.corsci.2015.02.003 ↗
9. Anodic stress corrosion cracking susceptibility of nickel and nickel-chromium alloys containing molybdenum and iron in bicarbonate plus chloride solutions at 90 °C10.5006/1326 ↗
10. Effects of phosphorus segregation on stress corrosion cracking in the heat-affected zone of a dissimilar weld joint between a Ni-base alloy and a low alloy steel10.1016/j.corsci.2014.10.037 ↗
11. Oxidation of Ni base alloys in PWR water: oxide layers and associated damage to the base metal
12. Effect of dissolved hydrogen on the electrochemical behavior of Alloy 600 in simulated PWR primary water at 290 °C10.1016/j.corsci.2011.02.020 ↗
13. Effects of dissolved hydrogen on the crack-initiation and oxidation behavior of nickel-based alloys in high-temperature water10.1016/j.corsci.2016.02.011 ↗
14. Nickel alloy primary water bulk surface and SCC corrosion film analytical characterization and SCC mechanistic implications
15. Effects of temperature on the protective property, structure and composition of the oxide film on Alloy 62510.1016/j.corsci.2009.06.043 ↗
16. Electrochemical characterization of oxide film formed at high temperature on Alloy 69010.1016/j.nucengdes.2011.11.018 ↗
17. Effect of temperature and dissolved hydrogen on oxide films formed on Ni and Alloy 182 in simulated PWR water10.1016/j.jnucmat.2016.05.022 ↗
18. Evaluation of temperature effect on the corrosion process of 304 stainless steel in high temperature water with electrochemical noise10.1016/j.matdes.2015.05.044 ↗
19. Effects of the solution temperature and the pH on the electrochemical properties of the surface oxide films formed on Alloy 60010.1016/j.corsci.2008.01.008 ↗
20. Influence of pH on electrochemical properties of passive films formed on Alloy 690 in high temperature aqueous environments10.1016/j.corsci.2009.08.002 ↗
21. Effects of pH value on characteristics of oxide films on 316L stainless steel in Zn-injected borated and lithiated high temperature water10.1016/j.corsci.2013.09.017 ↗
22. Influence of conductivity on corrosion behavior of 304 stainless steel in high temperature aqueous environment10.1016/j.jmst.2015.12.008 ↗
23. Yun · 2009
24. The corrosion behavior of nickel-based Alloys 182 and 52 and 316 stainless steel in cyclic hydrogenated and oxygenated water chemistry in high temperature aqueous environment
25. Effects of PWR primary water chemistry on PWSCC of Ni alloys
26. X-Ray photoelectron studies of the aqueous oxidation of Inconel-600 Alloy10.1149/1.2129132 ↗
27. XPS and STM study of the growth and structure of passive films in high temperature water on a nickel-base alloy10.1016/j.electacta.2004.04.032 ↗
28. Oxidation study of a polycrystalline Ni/Cr alloy II10.1021/cm970174o ↗
29. Surface passivation of Ni/Cr alloy at room temperature10.1016/S0039-6028(05)80016-0 ↗
30. A microstructural study of preferential oxidation at the grain boundaries of Ni-Cr alloys10.1023/A:1014818117073 ↗
31. A multiscale modelling study of Ni-Cr crack tip initial stage oxidation at different stress intensities10.1016/j.matchemphys.2010.02.068 ↗
32. The mechanism of oxide film formation on Alloy 690 in oxygenated high temperature water10.1016/j.corsci.2011.07.038 ↗
33. The corrosion behavior of Alloy 52 weld metal in cyclic hydrogenated and oxygenated water chemistry in high temperature aqueous environment10.1016/j.jnucmat.2015.02.033 ↗
34. The corrosion behavior of Alloy 182 in a cyclic hydrogenated and oxygenated water chemistry in high temperature aqueous environment10.1016/j.corsci.2015.12.017 ↗
35. The composition and morphology of oxide films formed on type 304 stainless steel in lithiated high temperature water10.1016/0010-938X(86)90024-7 ↗
36. The mechanism and kinetics of corrosion product release from stainless steel in lithiated high temperature water10.1016/0010-938X(87)90068-0 ↗
37. Corrosion rate of sus 304 and iron in high temperature water and composition of corrosion products
38. Analyses of primary side oxide layers on steam generator tubes from PWRs and radiochemical issues on the contamination of primary circuits10.1016/0022-3115(88)90133-X ↗
39. Early stage SCC initiation analysis of fcc Fe-Cr-Ni ternary alloy at 288 oC: a quantum chemical molecular dynamics approach10.1016/j.corsci.2009.01.005 ↗
40. High resolution electron microscopy study on oxide films formed on nickel-base alloys X-750, 182 and 82 in simulated high flow velocity BWR water conditions
41. Grain boundary depletion and migration during selective oxidation of Cr in a Ni-5Cr binary alloy exposed to high-temperature hydrogenated water10.1016/j.scriptamat.2014.06.022 ↗
42. Intergranular oxidation of Ni-based Alloy 600 in a simulated PWR primary water environment10.1016/j.corsci.2016.02.040 ↗
43. Effects of iron content in Ni-Cr-xFe alloys and immersion time on the oxide films formed in a simulated PWR water environment10.1016/j.jnucmat.2017.10.048 ↗
44. XPS study of oxides formed on nickel-base alloys in high-temperature and high-pressure water10.1002/sia.1282 ↗
45. Intergranular stress corrosion cracking behavior of austenitic stainless steels in hydrogenated high-temperature water10.5006/1.3278254 ↗
46. Pourbaix diagrams for the ternary system of iron-chromium-nickel10.5006/1.3283945 ↗
47. Revised Pourbaix diagrams for nickel at 25-300 °C10.1016/S0010-938X(97)00002-4 ↗
48. Revised Pourbaix diagrams for chromium at 25-300 °C10.1016/S0010-938X(97)89244-X ↗
49. Revised Pourbaix diagrams for iron at 25-300 °C10.1016/S0010-938X(96)00067-4 ↗
50. A detailed TEM and SEM study of Ni-base alloys oxide scales formed in primary conditions of pressurized water reactor10.1016/j.jnucmat.2010.05.010 ↗
51. Defects and cation diffusion in magnetite (III.) tracerdiffusion of Foreign tracer cations as a function of temperature and oxygen potential10.1002/bbpc.19780820803 ↗
52. Point defects and transport properties of binary and ternary oxides10.1016/0167-2738(84)90126-7 ↗
53. The mechanism of high temperature aqueous corrosion of stainless steels10.1016/0010-938X(91)90125-9 ↗
54. A point defect model for anodic passive films I. Film growth kinetics10.1149/1.2127591 ↗
55. Corrosion behavior of NiCrFe Alloy 600 in high temperature, hydrogenated water10.1016/j.corsci.2005.01.006 ↗
56. Localized corrosion (pitting): a model of passivity breakdown including the role of the oxide layer nanostructure10.1016/j.corsci.2008.06.047 ↗
57. In-situ electrochemical impedance measurement of oxide film formed on type 304 stainless steel in high-temperature water10.5006/1.3280542 ↗
58. Effect of alternately changing the dissolved Ni ion concentration on the oxidation of 304 stainless steel in oxygenated high temperature water10.1016/j.corsci.2011.04.016 ↗
59. Effect of nickel ion from autoclave material on oxidation behaviour of 304 stainless steel in oxygenated high temperature water10.1016/j.corsci.2010.12.008 ↗
60. Analysis and TEM examination of corrosion scales grown on Alloy 690 exposed to pressurized water at 325 °C10.1002/sia.1269 ↗
61. Corrosion mitigation in supercritical water with chromium ion10.5006/1.3278326 ↗