Plutonium heterogeneity in MOX fuel: A quantitative analysis
Source abstract
Abstract
Abstract (U,Pu)O2 mixed oxide (MOX) fuel has been irradiated in thermal as well as fast reactors in India for Pu utilization. MOX fuels are conventionally fabricated through the powder metallurgical route in conformance with the quality specifications. Homogeneity of fissile material in MOX fuel is a crucial characteristic which affects its performance in reactor as well as post irradiation dissolution for reprocessing. The relative richness and spatial extent of Pu rich agglomerates in the fuel matrix are the two important parameters to be controlled during fabrication to ensure homogeneity in the fuel. Gamma auto radiography is one of the routinely used inspection techniques for quality control of PFBR fuels for homogeneity. A new method based on image analysis and spectrophotometric analysis of the gamma auto radiographs has been developed for quantitative characterisation of fuel heterogeneity. The method could be used to estimate the relative Pu richness and size of the agglomerate in the fuel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear reactor physics and engineering · Nuclear Materials and Properties · Nuclear Physics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Encyclopedia of materials
2. Plutonium and the Indian atomic energy programme10.1016/j.jnucmat.2008.10.014 ↗
3. The design of the Prototype fast breeder reactor10.1016/j.nucengdes.2005.09.025 ↗
4. Effect of inhomogeneity on the level of fission gas and caesium release from OCOM MOX fuel during irradiation10.1016/0022-3115(95)00191-3 ↗
5. A review of microstructural features in fast reactor mixed oxide fuels10.1016/j.jnucmat.2018.05.076 ↗
6. Thermal conductivity of homogeneous and heterogeneous MOX fuel with up to 44MWd/kgHM burn-up10.1016/j.jnucmat.2011.02.042 ↗
7. Reprocessing of spent nuclear fuel in India: present challenges and future programme10.1016/j.pnucene.2017.03.001 ↗
8. MOX fuel fabrication for Indian nuclear power programme
9. Determination of PuO2% in power reactor mixed oxide fuel blends (0.4 –44% PuO2) by neutron well co-incidence counting technique10.1007/s10967-010-0497-5 ↗
10. A comparative study on dissolution rate of sintered (Th–U)O2 pellets in nitric acid by microwave and conventional heating10.1039/c0ay00630k ↗
11. Non destructive determination of Puo2 content in MOX fuel pins for fast reactors using passive gamma scanning10.1016/j.jnucmat.2010.01.011 ↗
12. A non destructive technique for determination of U233 and Pu content in MOX fuel pins for fast reactors10.1016/j.nucengdes.2011.05.035 ↗
13. Evaluation of micro-homogeneity in plutonium based nuclear reactor fuel pellets by alpha-autoradiography technique10.1016/j.jnucmat.2015.10.058 ↗
14. Nondestructive evaluation of uranium-plutonium mixed oxide (MOX) fuel elements by gamma autoradiography
15. Nondestructive characterisation of MOX fuel rods using gamma autoradiography (GAR)
16. Quantification of plutonium heterogeneity in (U, Pu) mixed oxide fuel using Passive Gamma Scanning10.1016/j.nucengdes.2012.10.018 ↗
17. ASTM C833-95a · 1999
18. Böhlen · Nucl. Data Sheets · 2014 · 120 · 21110.1016/j.nds.2014.07.049 ↗
19. Ferrari · 2005
20. Monte Carlo simulation of gamma images: application to plutonium rich mixed carbide fuel
21. Investigative Studies of alpha Irradiated PADC films: application to plutonium sources
22. Characterisation of nuclear fuel by spectroscopic evaluation of alpha autoradiographs10.1007/s10967-017-5361-4 ↗
23. Monitoring plutonium enrichment in mixed-oxide fuel pellets inside sealed nuclear fuel pins by neutron radiography10.1016/0308-9126(83)90127-X ↗