Micro-scale fracture experiments on zirconium hydrides and phase boundaries
Source abstract
Abstract
Fracture properties of micro-scale zirconium hydrides and phase boundaries were studied using microcantilever testing methods. FIB-machined microcantilevers were milled on cross-sectional surfaces of hydrided samples, with the most highly-stressed regions within the δ-hydride film, within the α-Zr or along the Zr-hydride interface. Cantilevers were notched using the FIB and then tested in bending using a nanoindenter. Load-displacement results show that three types of cantilevers have distinct deformation properties. Zr cantilevers deformed plastically. Hydride cantilevers fractured after a small amount of plastic flow; the fracture toughness of the δ-hydride was found to be 3.3 ± 0.4 MPam1/2 and SEM examination showed transgranular cleavage on the fracture surfaces. Cantilevers notched at the Zr-hydride interface developed interfacial voids during loading, at loads considerably lower than that which initiate brittle fracture of hydrides.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Nuclear Engineering Thermal-Hydraulics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Hydrides and delayed hydrogen cracking in zirconium and its alloys
2. Some observations on the deformation characteristics of bulk polycrystalline zirconium hydrides. Part 1: the deformation and fracture of hydrides based on the δ-phase10.1007/BF00550212 ↗
3. Experimental studies of mechanical properties of solid zirconium hydrides10.1016/j.jnucmat.2004.08.016 ↗
4. Hydride embrittlement and irradiation effects on the hoop mechanical properties of pressurized water reactor (PWR) and boiling-water reactor (BWR) Zircaloy cladding tubes: Part III10.1007/s11661-003-0093-1 ↗
5. Criteria for fracture initiation at hydrides in zirconium alloys I. Sharp crack tip10.1016/0022-3115(94)90332-8 ↗
6. Delayed hydride cracking in zirconium alloys – a review of mechanisms, assessment criteria and current developments
7. Effects of δ-hydride precipitation at a crack tip on crack propagation in delayed hydride cracking of Zircaloy-210.1016/j.jnucmat.2013.04.015 ↗
8. Fracture toughness of zirconium hydride and its influence on the crack resistance of zirconium alloys10.1016/0022-3115(79)90567-1 ↗
9. Toughness measurement of thin films: a critical review10.1016/j.surfcoat.2004.10.021 ↗
10. Determination of fracture toughness of bulk materials and thin films by nanoindentation: comparison of different models10.1080/14786435.2010.487984 ↗
11. On the Vickers indentation fracture toughness test10.1111/j.1551-2916.2006.01482.x ↗
12. A model for crack initiation in elastic/plastic indentation fields10.1007/BF00552240 ↗
13. Strength and fracture of Si micropillars: a new scanning electron microscopy-based micro-compression test10.1557/jmr.2007.0140 ↗
14. A novel pillar indentation splitting test for measuring fracture toughness of thin ceramic coatings10.1080/14786435.2014.913110 ↗
15. A new method for fracture toughness determination of graded (Pt,Ni)Al bond coats by microbeam bend tests10.1080/14786435.2012.669068 ↗
16. Measuring fracture toughness of coatings using focused-ion-beam-machined microbeams10.1557/JMR.2005.0048 ↗
17. A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films10.1016/j.tsf.2009.07.143 ↗
18. Micro-mechanical measurements of fracture toughness of bismuth embrittled copper grain boundaries10.1080/09500839.2011.573813 ↗
19. In situ micro-cantilever tests to study fracture properties of NiAl single crystals10.1016/j.actamat.2011.10.060 ↗
20. Characterization of the fracture toughness of micro-sized tungsten single crystal notched specimens10.1080/14786435.2012.658449 ↗
21. Measuring the fracture resistance of hard coatings10.1063/1.4803928 ↗
22. Can microscale fracture tests provide reliable fracture toughness values? A case study in silicon10.1557/jmr.2015.2 ↗
23. 〈a〉Prismatic, 〈a〉basal, and〈c+a〉 slip strengths of commercially pure Zr by micro-cantilever tests10.1016/j.actamat.2015.06.020 ↗
24. Hardie · 2013
25. The development and applications of zirconium alloys10.1016/0261-3069(85)90165-7 ↗
26. Fracture strength of hydride precipitates in Zr-2.5Nb alloys10.1016/S0022-3115(99)00132-4 ↗
27. In situ micropillar deformation of hydrides in Zircaloy-410.1016/j.actamat.2015.03.037 ↗
28. In situ crack growth observation and fracture toughness measurement of hydrogen charged Zircaloy-410.1016/S0022-3115(03)00305-2 ↗