Thermo-physical properties of DU–10wt.% Mo alloys
Source abstract
Abstract
Abstract Low-enriched uranium alloyed with 10 wt.% molybdenum is under consideration by the Global Threat Reduction Initiative reactor convert program as a very high density fuel to enable the conversion of high-performance research reactors away from highly-enriched uranium fuels. As with any fuel development program, the thermo-physical properties of the fuel as a function of temperature are extremely important and must be well characterized in order to effectively model and predict fuel behavior under normal and off-normal irradiation conditions. For the alloy system under investigation, the available thermo-physical property data is relatively inconsistent and often lacks appropriate explanation. Available literature on this alloy system comes mainly from studies done during the 1960s and 1970s, and often does not include sufficient information on fabrication history or conditions to draw conclusions for the current application. The current paper has investigated specific heat capacity, coefficient of linear thermal expansion, density, and thermal diffusivity that were then used to calculate alloy thermal conductivity as a function of temperature. The data obtained from this investigation was compared to available literature on similar U–Mo alloys, and in most cases are in good agreement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Nuclear reactor physics and engineering · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Snelgrove · Nucl. Eng. Des. · 1997 · 178 · 11910.1016/S0029-5493(97)00217-3 ↗
2. Hofman · 1994 · vol. 10A
3. Kittel · J. Nucl. Mater. · 1993 · 204 · 110.1016/0022-3115(93)90193-3 ↗
4. Matsui · J. Nucl. Mater. · 1989 · 167 · 15210.1016/0022-3115(89)90437-6 ↗
5. C.R. Clark, G.C. Knighton, M.K. Meyer, G.L. Hofman, Monolithic Fuel Plate Development at Argonne National Laboratory, 2003 International Meeting on Reduced Enrichment for Research and Test Reactors, Chicago, IL, 2003, pp. 1-10.
6. Burkes · J. Alloys Compd. · 2009 · 479 · 14010.1016/j.jallcom.2008.12.063 ↗
7. ASTM E 1269-05, Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry, 2005.
8. ASTM E 228-06, Standard Test Method for Linear Thermal Expansion of Solid Materials with a Push-Rod Dilatometer, 2006.
9. ASTM E 1461-07, Standard Test Method for Thermal Diffusivity by the Flash Method, 2007.
10. Dwight · J. Nucl. Mater. · 1960 · 2 · 8110.1016/0022-3115(60)90028-3 ↗
11. A.M. Nomine, D. Bedere, D. Miannay, The influence of physio-chemical parameters on the mechanical properties of some isotropic uranium alloys, in: Proceedings of the Third Army Materials Technical Conference, Physical Metallurgy of Uranium Alloys, Vail, CO, 1974, pp. 657–699.
12. Orlov · Atom. Energy · 2000 · 88 · 4210.1007/BF02673318 ↗
13. Van Thyne · Trans. ASM · 1957 · 49 · 598
14. C.A.W. Peterson, W.J. Steele, S.L. Digiallonardo, Isothermal transformation study of some uranium-base alloys, Report UCRL-7824, 1964.10.2172/4672623 ↗
15. Repas · Trans. ASM · 1964 · 57 · 150
16. M.S. Farkas, Mechanical and physical properties of fuels and cladding materials with potential for use in Brookhaven’s pulsed fast reactor, Report BMI-X-455, 1967.10.2172/4902102 ↗
17. Parida · J. Phys. Chem. Solids · 2001 · 62 · 58510.1016/S0022-3697(00)00219-5 ↗
18. H.A. Saller, R.F. Dickerson, W.E. Muir, Uranium Alloys for High Temperature Application, BMI-1098, June 25, 1956, pp. 24–27.10.2172/4330099 ↗
19. Union Carbide Corporation, Metallurgy Division Annual Progress Report for the Period Ending May 31, 1961, ORNL-3160, 1961.
20. Klein · 1962 · 31
21. R.K. McGeary (Ed.), Development and Properties of Uranium-Base Alloys Corrosion Resistant in High-Temperature Water, Pt. I., Alloys Without Protective Cladding, WAPD-127, 1955.
22. Bridge · Trans. AIME · 1956 · 206 · 1282
23. Lloyd · Trans. AIME · 1957 · 209 · 532
24. Sundarmurti · ISIJ Int. · 2002 · 42 · 80010.2355/isijinternational.42.800 ↗
25. Maxwell · 1873
26. Eucken · Forsch. Geb. Ing., B-3, Forschung Sheft · 1932 · 53 · 6
27. S.T. Konobeevskii, Some physical properties of uranium, plutonium, and their alloys, in: Proceedings of the Second UN International Conference on the Peaceful Uses of Atomic Energy, Paper P/2230, 1958.
28. Touloukian · 1970 · vol. 1