Effect of gamma radiation on early age strength and pore structure development of metakaolin-based geopolymer used for conditioning cesium and strontium radioactive waste
Source abstract
Abstract
This paper presents the effect of gamma radiation on early age strength and pore structure development in metakaolin (MK)-based geopolymers containing realistic cesium and strontium loading determined based on Boom Clay, a hypothetical host formation under consideration in the Belgian geological disposal concept. The effect of gamma-induced heat was decoupled from the ionizing nature of gamma radiation and assessed separately to elucidate its impact on strength and microstructure development. Changes in pore structure were evaluated using nitrogen physisorption and mercury intrusion porosimetry. The results indicate that both gamma radiation and temperature, analogous to irradiation-induced heat, negatively impacted the strength and pore structure development. Gamma radiation exposure of fresh geopolymer samples resulted in a coarser microstructure, leading to lower strength. No dose rate effect was observed, but the type of gamma radiation source had a significant impact, particularly on pore structure. Geopolymer samples exposed to Cs-137 from spent nuclear fuel exhibited larger pore structure alteration than those exposed to Co-60 at the same cumulative dose and similar dose rates. This suggests that a higher degree of pore structure alteration than previously reported in the literature could be anticipated in real-world Cs and Sr immobilization. The pore structure alteration is attributed to both gamma-induced heat and gamma-assisted water radiolysis and subsequent H2 evolution and escape, with water radiolysis being the dominant mechanism of microstructural damage. Nevertheless, the MKbased geopolymer exposed to gamma radiation during hardening maintained satisfactory compressive strength, demonstrating strong radiation resistance. This indicates that MK-based geopolymer is promising for the immobilization of Cs and Sr-containing wastes. This study not only provides insights on formulating waste forms with realistic waste content in line with the foreseen geological disposal concept, but also advances our knowledge on mechanical and pore structure development under gamma irradiation, which have positive implications on radioactive waste management.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Chemical Synthesis and Characterization · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. L. Price, Cs-135 content of cesium capsules and strontium/cesium heat sources, in: WM2018 Conf., Phoenix, Arizona, USA, 2018: pp. 1–5.
2. On the estimation of nuclide inventory and decay heat: a review from the EURAD European project10.1051/epjn/2022055 ↗
3. Batch adsorption and desorption investigations of Cs(I) and Sr(II) from simulated reactor waste by humic acid
4. Multilayer shielding design for intermediate radioactive waste storage drums: a comparative study between FLUKA and QAD-CGA
5. The ASOF project – Advanced separation for the optimal management of spent fuel
6. Standard and advanced separation: PUREX processes for nuclear fuel reprocessing
7. K. Verguts, Proof of concept study on the combined Cs /Sr partitioning, 2024.
8. Immobilization of simulated radionuclide 133Cs+ by fly ash-based geopolymer10.1016/j.jhazmat.2013.08.049 ↗
9. Effect of exposure of metakaolin-based geopolymer cements to gamma radiation10.1111/jace.19747 ↗
10. Influence of gamma ray irradiation on metakaolin based sodium geopolymer10.1016/j.jnucmat.2013.06.044 ↗
11. Selective removal of cesium and strontium using porous frameworks from high level nuclear waste10.1039/C6CC00843G ↗
12. Statistical analysis of effects of test conditions on compressive strength of cement solidified radioactive waste10.1016/j.net.2022.11.008 ↗
13. Pore structure of geopolymer materials and its correlations to engineering properties: a review10.1016/j.conbuildmat.2022.127064 ↗
14. Geopolymers from fly ash and their gamma irradiation10.1016/j.matlet.2018.05.088 ↗
15. Effects of gamma-ray irradiation on leaching of simulated 133Cs+ radionuclides from geopolymer wasteforms10.1016/j.jnucmat.2015.01.052 ↗
16. Water content and porosity effect on hydrogen radiolytic yields of geopolymers10.1016/j.jnucmat.2017.07.005 ↗
17. The effect of high dose rate gamma irradiation on the curing of CaO-FexOy-SiO2 slag based inorganic polymers: mechanical and microstructural analysis10.1016/j.jnucmat.2020.152237 ↗
18. Impact of gamma-ray irradiation on hardened white Portland cement pastes exposed to atmosphere10.1016/j.cemconres.2018.03.005 ↗
19. ONDRAF/NIRAS, Technical overview of the SAFIR 2 report. safety assessment and feasibility interim report 2, 2001.
20. E. Weetjens, J. Govaerts, ER-0990 ASOF deliverable D4.2 impact of separation and conditioning on final disposal, 2024.
21. Develoment of cesium and strontium separation and immobilization technologies in support of an advanded nuclear fuel cycle
22. C.J. Werner, J.S. Bull, C.J.J. Solomon, F.B. Brown, G.W. Mckinney, M.E. Rising, D.A. Dixon, R.L. Martz, H.G.I. Hughes, L.J. Cox, A.J. Zukaitis, J.C. Armstrong, R.A. Forster Iii, L. Casswell, MCNP Version 6.2 release notes, 2018.10.2172/1419730 ↗
23. Influence of the gamma source on the radiolytic stability of N,N,N′,N′-tetra-n-octyl-diglycolamide (TODGA)
24. Irradiation facilities at SCK·CEN for radiation tolerance assessment of space materials
25. B.D. Murphy, Characteristics of spent fuel from plutonium Disposition Reactors vol. 1: the combustion Engineering System 80+ pressurized-water- reactor design, Oak Ridge, 1996.10.2172/652690 ↗
26. Dosimetry and methodology of gamma irradiation for degradation studies on solvent extraction systems10.1515/ract-2020-0040 ↗
27. Gamma ray, beta and alpha particles as a sources and detection
28. Institute of Medicine, an evaluation of radiation exposure guidance for Military operations: interim Report, Washington, DC, 1997. https://doi.org/10.17226/5853.10.17226/5853 ↗
29. Strength and microstructure characteristics of metakaolin-based geopolymer mortars with high water-to-binder ratios
30. Pitfalls in the use and interpretation of TGA and MIP techniques for Ca-leached cementitious materials10.1016/j.matdes.2019.108041 ↗
31. Effects of gamma ‑ ray irradiation on hardened cement mortar10.1186/s40069-020-00452-7 ↗
32. Electric Power Research Institute (EPRI), Radwaste radiolytic gas generation literature review, 1988.
33. Encapsulation of Mg-Zr alloy in metakaolin-based geopolymer10.1016/j.clay.2012.09.023 ↗
34. Co-immobilization of cesium and strontium containing waste by metakaolin-based geopolymer: microstructure, mineralogy and mechanical properties10.1016/j.jnucmat.2023.154639 ↗
35. Cement-waste interactions: hardening self-compacting mortar exposed to gamma radiation10.1016/j.pnucene.2015.03.019 ↗
36. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
37. Atomistic insight into the effects of order, disorder and their interface on defect evolution10.1016/j.jallcom.2020.157770 ↗
38. Changes in the structure, crystallinity, morphology and adsorption property of gamma-irradiated Philippine natural zeolites
39. A comparison of the effects of gamma radiation from spent fuel and cobalt-60 on electronic components
40. Determination, separation and application of 137Cs: a review10.3390/ijerph191610183 ↗
41. Study of gamma rays shielding parameters of some building materials used in Sudan10.29252/ijrr.19.1.191 ↗
42. Assessment of pore structure characteristics and tortuosity of 3D printed concrete using mercury intrusion porosimetry and X-ray tomography10.1016/j.cemconcomp.2023.105104 ↗
43. Everett · 1972
44. The effect of pore behavior and gel structure on the mechanical property at different initial water content10.1016/j.conbuildmat.2021.125146 ↗
45. Effects of autogenous shrinkage microcracks on UHPC: insights from a machine learning based crack quantification approach10.1016/j.conbuildmat.2024.136400 ↗