journal article·2025-01

The oxidation-dissolution behavior of Cr-coated Zr alloy in high temperature water

Tao Huang, Yuhao Zhou, Kai Chen, Tianguo Wei, Shixin Gao, Hua Pang, Huifang Yue, Kun Zhang, Zhao Shen, Lefu Zhang

Publisher page

Abstract

The corrosion and dissolution behavior of Cr-coated Zr alloy were investigated in high temperature water under varying dissolved oxygen (DO) and temperatures. Results demonstrate that the oxidation and dissolution rates of Cr coatings increase significantly with higher DO levels and temperature, while the Zr substrate remains unaffected by DO concentration. At DO levels below 10 ppb, Cr coatings exhibit high stability, but at 300 ppb DO, rapid corrosion/dissolution and spallation occur. The electrochemical potential (ECP) shifts in response to temperature and DO, driving the dissolution mechanism through three distinct region: steady-state, field-assisted dissolution (FAD), and complete dissolution. During the FAD period, a porous nanocrystalline Cr 2O 3 layer with residual Cr forms, characterized by non-uniform dissolution due to preferential oxidation at grain boundaries and microstructural defects. The soluble HCrO 4 − ions form at the base of the porous layer, followed by partial recrystallization at the surface, leading to the development of a thin Cr 2O 3 crystalline layer.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Phase field modeling of irradiation-enhanced corrosion of Zircaloy-4 in PWRs10.1016/j.corsci.2018.10.026 ↗
2. AREVA NP's enhanced accident-tolerant fuel developments: focus on Cr-coated M5 cladding10.1016/j.net.2017.12.004 ↗
3. The effect of chromium-based coatings on corrosion behavior of alloy Zr1Nb in 70ppm Li+ water environment10.1016/j.jnucmat.2024.155245 ↗
4. Accident tolerant fuel cladding development: promise, status, and challenges10.1016/j.jnucmat.2017.12.043 ↗
5. Application and development progress of Cr-based surface coating in nuclear fuel elements: II. Current status and shortcomings of performance studies10.3390/coatings10090835 ↗
6. Accelerated optimization of chromium coating microstructures for nuclear fuel applications through electrochemical corrosion testing10.1016/j.jnucmat.2023.154628 ↗
7. Review on chromium coated zirconium alloy accident tolerant fuel cladding10.1016/j.jallcom.2021.162450 ↗
8. Understanding the oxidation resistance of zirconium alloy at 1000°C based on the formation of a Zr-Sn intermetallic phase and co-precipitation of Sn and Nb10.1016/j.actamat.2023.119622 ↗
9. High temperature steam oxidation of chromium-coated zirconium-based alloys: kinetics and process10.1016/j.corsci.2020.108537 ↗
10. Adhesion property and high-temperature oxidation behavior of Cr-coated Zircaloy-4 cladding tube prepared by 3D laser coating10.1016/j.jnucmat.2015.06.030 ↗
11. High temperature oxidation and micr ostructural evolution of cold spray chromium coatings on Zircaloy-4 in steam environments10.1016/j.jnucmat.2019.151737 ↗
12. Oxidation kinetics of Cr-coated zirconium alloy: effect of coating thickness and microstructure10.1016/j.corsci.2020.108883 ↗
13. Effect of metal contaminants on Cr coating performance after irradiation in the advanced test reactor
14. Examinations of Cr-coated M5 cladding irradiated at the INL advanced test reactor
15. Early studies on Cr-coated zircaloy-4 as enhanced accident tolerant nuclear fuel claddings for light water reactors10.1016/j.jnucmat.2019.02.018 ↗
16. Corrosion behavior of Cr-coated zirconium alloy cladding in LiOH/H3BO3-containing water at 360 ℃10.1016/j.corsci.2023.111386 ↗
17. Pourbaix diagrams for chromium, aluminum and titanium extended to high-subcritical and low-supercritical conditions10.1016/j.corsci.2012.02.002 ↗
18. Utilization of EPRI ChemWorks tools for PWR shutdown chemistry evolution modeling10.1016/j.net.2023.06.016 ↗
19. Water chemistry in the primary coolant circuit of a boiling water reactor during startup operations10.13182/NSE11-85 ↗
20. Fork-end heat pipe for passive air cooling of spent nuclear fuel pool10.1016/j.nucengdes.2021.111081 ↗
21. The influence of water chemistry on the radiolysis of the primary coolant water in pressurized water reactors10.1016/S0022-3115(98)00494-2 ↗
22. Hydrothermal corrosion of PVD and cold spray Cr-coatings on Zircaloy-4 in hydrogenated and oxygenated LWR coolant environments
23. Microstructure, corrosion resistance and oxidation behavior of Cr-coatings on zircaloy-4 prepared by vacuum arc plasma deposition10.1016/j.corsci.2019.06.029 ↗
24. An orthogonal experimental study on the preparation of Cr coatings on long-size Zr alloy tubes by arc ion plating10.3390/ma15207177 ↗
25. Microstructure and high-temperature steam oxidation properties of thick Cr coatings prepared by magnetron sputtering for accident tolerant fuel claddings: the role of bias in the deposition process10.1016/j.corsci.2019.108378 ↗
26. The reproducibility of corrosion testing in supercritical water—results of a second international interlaboratory comparison exercise10.1016/j.jnucmat.2022.153759 ↗
27. Investigation on the corrosion behavior of Alloy 800H at various levels of deformation10.1016/j.corsci.2022.110926 ↗
28. Microstructural investigation of the nodular corrosion of 304NG stainless steel in supercritical water10.1016/j.corsci.2020.108652 ↗
29. Understanding the surface oxide evolution of T91 ferritic-martensitic steel in supercritical water through advanced characterization10.1016/j.actamat.2020.05.016 ↗
30. Micro-Raman characterization of laser-induced local thermo-oxidation of thin chromium films10.1002/jrs.2920 ↗
31. On Raman spectroscopy of zirconium oxide films10.1016/S0022-3115(97)00038-X ↗
32. The structure dependence of grain boundary passivation of Alloy 690 in high temperature water10.1016/j.actamat.2023.119368 ↗
33. The effects of grain boundary structure and bulk Cr content on grain boundary degradation behavior of Ni-Cr binary alloys in high temperature CO210.1016/j.actamat.2023.119496 ↗
34. A study of the passive films on chromium by capacitance measurement10.1016/S0010-938X(02)00148-8 ↗
35. In-service electrochemical potential data in a deaerator feedwater storage vessel; the influence of a noble metal coating10.1016/S0308-0161(00)00040-5 ↗
36. Revised pourbaix diagrams for chromium at 25–300°C10.1016/S0010-938X(97)89244-X ↗
37. Elevated temperature potential-pH diagrams for the Cr-H2O, Ti-H2O, Mo-H2O, and Pt-H2O systems10.5006/1.3585993 ↗
38. Theoretical modelling of porous oxide growth on aluminium10.1088/0022-3727/25/8/017 ↗
39. A historical, statistical and electrochemical approach on the effect of microstructure in the anodizing of Al alloys: a review
40. Modeling of electrochemical oxide film growth-a PDM refinement
41. The history of the point defect model for the passive state: a brief review of film growth aspects10.1016/j.electacta.2010.11.005 ↗
42. 3D simulations of ordered nanopore growth in alumina10.1016/j.electacta.2015.08.164 ↗
43. Effect of the 345°C and 16.5 MPa autoclave corrosion on the oxidation behavior of Cr-coated zirconium claddings in the high-temperature steam10.1016/j.corsci.2021.109608 ↗
44. Nanoporous anodic aluminium oxide: advances in surface engineering and emerging applications10.1016/j.pmatsci.2013.01.002 ↗
45. One dimensional wormhole corrosion in metals