Effect of Au-ion irradiation on the morphology, microstructure and lead-bismuth eutectic corrosion behavior of refractory TiNbZrMoV high-entropy alloy coating
Source abstract
Abstract
The effect of Au-ion irradiation on the morphology, microstructure and lead-bismuth eutectic (LBE) corrosion behavior of refractory TiNbZrMoV high-entropy alloy coating was investigated. After irradiation, the surfaces of coatings were smoothened, and crystalline phase was formed in the coatings. After LBE corrosion at 650 °C, the irradiated samples presented a triple layer (interface Fe-Cr spinel, coating and surface Fe-oxide layer) consistent with the pristine sample, and the coating still maintained the low-consumption characteristic. Irradiation accelerated LBE corrosion, which could be attributed to the formation of grain boundary and defects that provided more diffusion channels for atoms.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Structural materials for Gen-IV nuclear reactors: Challenges and opportunities10.1016/j.jnucmat.2008.08.044 ↗
2. Materials for future nuclear energy systems10.1016/j.jnucmat.2019.151837 ↗
3. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
4. Structural materials challenges for advanced reactor systems10.1016/j.jnucmat.2008.11.026 ↗
5. Generation IV nuclear reactors: Current status and future prospects10.1016/j.enpol.2013.06.101 ↗
6. Corrosion behaviour of stainless steels in flowing LBE at low and high oxygen concentration10.1016/j.jnucmat.2004.07.011 ↗
7. Ferritic/martensitic steels for next-generation reactors10.1016/j.jnucmat.2007.05.005 ↗
8. Long-term corrosion of austenitic steels in flowing LBE at 400 °C and 10−7 mass% dissolved oxygen in comparison with 450 and 550 °C10.1016/j.jnucmat.2015.09.027 ↗
9. Long term corrosion on T91 and AISI1 316L steel in flowing lead alloy and corrosion protection barrier development: Experiments and models10.1016/j.jnucmat.2011.04.028 ↗
10. Opportunities for the LWR ATF materials development program to contribute to the LBE-cooled ADS materials qualification program10.1016/j.jnucmat.2016.10.012 ↗
11. Temperature effect on the corrosion mechanism of austenitic and martensitic steels in lead–bismuth10.1016/S0022-3115(01)00723-1 ↗
12. Liquid metal corrosion of T91 and A316L materials in Pb–Bi eutectic at temperatures 400–600 °C10.1016/j.corsci.2005.04.001 ↗
13. Effect of Lead-Bismuth Eutectic Oxygen Concentration on the Onset of Dissolution Corrosion in 316 L Austenitic Stainless Steel at 450 °C10.1115/1.4039598 ↗
14. Corrosion behavior of 410 stainless steel in flowing lead-bismuth eutectic alloy at 550 °C10.1016/j.jnucmat.2019.05.029 ↗
15. T91 cladding tubes with and without modified FeCrAlY coatings exposed in LBE at different flow, stress and temperature conditions10.1016/j.jnucmat.2008.02.026 ↗
16. Performance of 9Cr Ferritic-Martensitic Steels in Flowing Lead for 8000 h10.1016/j.jnucmat.2021.153092 ↗
17. Oxygen control systems and impurity purification in LBE: Learning from DEMETRA project10.1016/j.jnucmat.2011.04.040 ↗
18. Review of the studies on fundamental issues in LBE corrosion10.1016/j.jnucmat.2007.06.019 ↗
19. A review of steel corrosion by liquid lead and lead–bismuth10.1016/j.corsci.2009.03.013 ↗
20. Corrosion of steels with surface treatment and Al-alloying by GESA exposed in lead–bismuth10.1016/j.jnucmat.2006.01.014 ↗
21. Low cycle fatigue tests of surface modified T91 steel in 10−6wt% oxygen containing Pb45Bi55 at 550 °C10.1016/j.jnucmat.2008.02.075 ↗
22. Surface modification/alloying using intense pulsed electron beam as a tool for improving the corrosion resistance of steels exposed to heavy liquid metals10.1016/j.jnucmat.2011.04.030 ↗
23. Corrosion, Al containing corrosion barriers and mechanical properties of steels foreseen as structural materials in liquid lead alloy cooled nuclear systems10.1016/j.nucengdes.2010.08.005 ↗
24. Corrosion behavior of heat-treated Fe–Al coated steel in lead–bismuth eutectic under loading10.1016/j.pnucene.2011.05.014 ↗
25. FeCrAlY and TiN coatings on T91 steel after irradiation with 72 MeV protons in flowing LBE10.1016/j.jnucmat.2011.11.006 ↗
26. Lead-bismuth eutectic (LBE) corrosion behavior of AlTiN coatings at 550 and 600 °C10.1016/j.jnucmat.2020.152280 ↗
27. Lead-bismuth eutectic (LBE) corrosion mechanism of nano-amorphous composite TiSiN coatings synthesized by cathodic arc ion plating10.1016/j.corsci.2021.109264 ↗
28. Preliminary study on nano- and micro-composite sol–gel based alumina coatings on structural components of lead–bismuth eutectic cooled fast breeder reactors10.1016/j.jnucmat.2010.11.022 ↗
29. Challenges and coating solutions for wear and corrosion inside Lead Bismuth Eutectic: A review10.1016/j.surfcoat.2022.128542 ↗
30. 1.04-Radiation-Induced Effects on Microstructure☆
31. Atomic-level heterogeneity and defect dynamics in concentrated solid-solution alloys10.1016/j.cossms.2017.02.002 ↗
32. Effect of Au-ions irradiation on mechanical and LBE corrosion properties of amorphous AlCrFeMoTi HEA coating: Enhanced or deteriorated?10.1016/j.corsci.2021.109862 ↗
33. The Corrosion Behavior of Multiphase Ceramic Protective Coatings on China Low Activation Martensitic Steel Surface in Flowing Liquid Lead-Bismuth Eutectic10.1002/srin.201600413 ↗
34. Current state and prospect on the development of advanced nuclear fuel system materials: A review
35. Microstructures and properties of high-entropy alloy films and coatings: a review10.1080/21663831.2018.1434248 ↗
36. Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900 K10.1016/j.actamat.2019.10.015 ↗
37. Radiation damage tolerance of a novel metastable refractory high entropy alloy V2.5Cr1.2WMoCo0.0410.1016/j.jnucmat.2020.152005 ↗
38. Microstructure and tribological properties of TiTaHfNbZr high entropy alloy coatings deposited on Ti-6Al-4V substrates10.1016/j.intermet.2018.11.015 ↗
39. Irradiation-induced swelling and hardening in HfNbTaTiZr refractory high-entropy alloy10.1016/j.matlet.2020.127832 ↗
40. Corrosion behavior of refractory TiNbZrMoV high-entropy alloy coating in static lead‑bismuth eutectic alloy: A novel design strategy of LBE corrosion-resistant coating?10.1016/j.surfcoat.2022.128884 ↗
41. Degradation of HT9 under simultaneous ion beam irradiation and liquid metal corrosion10.1016/j.jnucmat.2016.06.039 ↗
42. New considerations on the kinetics of mass transfer in sodium fast reactors: An attempt to consider irradiation effects and low temperature corrosion10.1016/j.jnucmat.2012.01.019 ↗
43. 1.07-Radiation Damage Using Ion Beams10.1016/B978-0-08-056033-5.00007-0 ↗
44. Electron or ion irradiation-induced phase-change mechanism between amorphous and crystalline state10.1016/j.actamat.2010.12.025 ↗
45. Effect of Au-ion irradiation on the microstructure and deuterium permeation resistance of the Al2O3 prepared by the MOD method10.1016/j.surfcoat.2021.127616 ↗
46. 1.14-Toward the Use of Ion Irradiation to Predict Reactor Irradiation Effects
47. Microstructure response and lead-bismuth eutectic corrosion behavior of 11Cr1Si ferritic/martensitic steel after Au-ion irradiation10.1016/j.corsci.2022.110101 ↗
48. Ion irradiation tolerance of TiSiN nanocomposite coating10.1016/j.surfcoat.2016.08.044 ↗
49. Oxidation behavior of an 11Cr ferritic–martensitic steel after Ar-ions irradiation in supercritical water10.1016/j.jnucmat.2015.02.024 ↗
50. An ion beam facility based on a 3 MV tandetron accelerator in Sichuan University, China10.1016/j.nimb.2018.01.002 ↗
51. On the use of SRIM for computing radiation damage exposure10.1016/j.nimb.2013.05.008 ↗
52. C. Schroer, J. Konys, Physical Chemistry of Corrosion and Oxygen Control in Liquid Lead and Lead-Bismuth Eutectic, (2007).
53. Corrosion behavior of ion-irradiated 12Cr2W2Mn F/M steel in liquid LBE
54. Microstructure evolution and lead-bismuth eutectic corrosion behavior of 11Cr1Si ferritic/martensitic steel after proton irradiation10.1016/j.jnucmat.2022.153796 ↗
55. Characteristics of ion beam modified magnesium oxide films10.1016/S0040-6090(03)01087-3 ↗
56. Study of thickness dependent sputtering in gold thin films by swift heavy ion irradiation, Nuclear Instruments and Methods in10.1016/j.nimb.2015.08.061 ↗
57. Effect of ion irradiation in an Al90Fe2Ce8 metallic glass10.1016/j.matdes.2014.05.010 ↗
58. Corrosion of ferritic–martensitic steel HT9 in supercritical water10.1016/j.jnucmat.2006.07.010 ↗
59. Au-ion irradiation effects on microstructure and deuterium permeation resistance of Al/Al2O3 coating10.1088/1741-4326/ac74d0 ↗
60. Effect of Au ion irradiation on the surface morphology, microstructure and mechanical properties of AlNbTiZr medium-entropy alloy coatings with various Al content for ATF10.1016/j.surfcoat.2022.128157 ↗
61. Effect of Au-ion irradiation on the surface morphology, microstructure and mechanical properties of amorphous AlCrFeMoTi HEA coating10.1016/j.surfcoat.2021.127252 ↗
62. Effects of Cu ion irradiation in Cu50Zr45Ti5 metallic glass10.1016/j.scriptamat.2009.03.060 ↗
63. Manipulation of free volumes in a metallic glass through Xe-ion irradiation10.1016/j.actamat.2016.01.002 ↗
64. Surface Smoothing of Rough Amorphous Films by Irradiation-Induced Viscous Flow10.1103/PhysRevLett.87.196106 ↗
65. Crystallization behavior and mechanical response of metallic glass induced by ion irradiation at elevated temperature10.1016/j.jnucmat.2020.152618 ↗
66. Micromechanical properties and microstructural evolution of Amosic-3 SiC/SiC composites irradiated by silicon ions10.1016/j.jeurceramsoc.2020.02.023 ↗
67. Nano- and microstructuring of solids by swift heavy ions10.3367/UFNe.2016.10.038012 ↗
68. Historical review of computer simulation of radiation effects in materials10.1016/j.jnucmat.2019.04.028 ↗
69. Irradiation responses and defect behavior of single-phase concentrated solid solution alloys10.1557/jmr.2018.285 ↗
70. Early corrosion behaviour of irradiated FeCrAl alloy in a simulated pressurized water reactor environment10.1016/j.corsci.2020.108824 ↗
71. Structure of surface oxides on martensitic steel under simultaneous ion irradiation and molten LBE corrosion10.1016/j.corsci.2021.109953 ↗
72. Influence of Irradiation on the Oxide Film Formed on 316L Stainless Steel in PWR Primary Water10.1007/s11085-013-9401-3 ↗
73. Corrosion of phase and phase boundary in proton-irradiated 308L stainless steel weld metal in simulated PWR primary water10.1016/j.corsci.2019.108401 ↗
74. Effect of Irradiation on Corrosion Behavior of 316L Steel in Lead-Bismuth Eutectic with Different Oxygen Concentrations10.3390/qubs5030027 ↗