Heavy ion irradiation effects on CrFeMnNi and AlCrFeMnNi high entropy alloys
Source abstract
Abstract
Co-free but Al-included medium/high entropy alloys (M/HEAs) have gained increasing interests due to their lower cost and the potential to tune the multi-phase microstructure. The irradiation response of two Co-free HEAs, face-centered cubic (FCC) CrFeMnNi with limited Cr enriched α′ phase and body-centered cubic (BCC) AlCrFeMnNi with B2 s phase and nanoprecipitates were explored. Ion irradiations using 5 MeV Fe 2+ ions were performed at 500 ° C to a peak fluence of 50 and/or 100 displacements per atom (dpa). In dual-phase AlCrFeMnNi, there was no significant radiation induced segregation or chemical intermixing at the coherent matrix (FeCrMn-rich)/second phase (AlNi-rich) boundaries. In CrFeMnNi, limited voids were only detected at the peak damage location of ∼ 50 dpa. On the other hand, voids were widely distributed in AlCrFeMnNi: under 50 and 100 dpa irradiation conditions, voids were found with larger dimension and denser distribution in the FeCrMn-rich matrix, smaller and slightly lower density in an AlNi-rich second phase. In addition, the diameter of the FeCMn-rich nanoprecipitates didn`t reveal any tendency of dissolution or growth. This is correlated with their superior structural stability against irradiation. Significant radiation-induced hardening (increases from 3.8 ± 0.2 GPa to 4.7 ± 0.6 GPa) was measured in CrFeMnNi, but only ∼ 4% hardness increase (from 7.4 ± 0.8 GPa to 7.7 ± 0.4 GPa) was noted in AlCrFeMnNi. In addition to the radiation-induced defects, such as voids, dislocation loops and point defects, other factors, such as chemical short-range ordering may play an important role.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. 2015
2. Designing radiation resistance in materials for fusion energy10.1146/annurev-matsci-070813-113627 ↗
3. Advanced micro-reactor concepts10.1016/j.pnucene.2018.02.025 ↗
4. Materials for the plasma-facing components of fusion reactors10.1016/j.jnucmat.2004.04.005 ↗
5. G.S. Was, Fundamentals of radiation materials science: metals and alloys, springer2016.
6. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
7. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
8. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
9. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
10. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
11. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
12. High-entropy alloys10.1038/s41578-019-0121-4 ↗
13. Grain boundary decohesion by nanoclustering Ni and Cr separately in CrMnFeCoNi high-entropy alloys10.1126/sciadv.aay0639 ↗
14. Helium accumulation and bubble formation in FeCoNiCr alloy under high fluence He+ implantation10.1016/j.jnucmat.2018.01.041 ↗
15. He behavior in Ni and Ni-based equiatomic solid solution alloy10.1016/j.jnucmat.2018.04.009 ↗
16. Helium irradiated cavity formation and defect energetics in Ni-based binary single-phase concentrated solid solution alloys10.1016/j.actamat.2018.10.040 ↗
17. Effects of 3d electron configurations on helium bubble formation and void swelling in concentrated solid-solution alloys10.1016/j.actamat.2019.10.013 ↗
18. Irradiation responses and defect behavior of single-phase concentrated solid solution alloys10.1557/jmr.2018.285 ↗
19. Atomic-level heterogeneity and defect dynamics in concentrated solid-solution alloys10.1016/j.cossms.2017.02.002 ↗
20. Outstanding radiation resistance of tungsten-based high-entropy alloys10.1126/sciadv.aav2002 ↗
21. Tunable Chemical Disorder in Concentrated Alloys: defect Physics and Radiation Performance10.1021/acs.chemrev.1c00387 ↗
22. Influence of chemical disorder on energy dissipation and defect evolution in concentrated solid solution alloys10.1038/ncomms9736 ↗
23. Thermodynamics of vacancies and clusters in high-entropy alloys
24. Enhancing radiation tolerance by controlling defect mobility and migration pathways in multicomponent single-phase alloys10.1038/ncomms13564 ↗
25. Frenkel defect recombination in Ni and Ni‒containing concentrated solid‒solution alloys10.1016/j.actamat.2019.04.060 ↗
26. Point defect evolution in Ni, NiFe and NiCr alloys from atomistic simulations and irradiation experiments10.1016/j.actamat.2015.08.007 ↗
27. Damage accumulation in ion-irradiated Ni-based concentrated solid-solution alloys10.1016/j.actamat.2016.02.048 ↗
28. Mechanism of radiation damage reduction in equiatomic multicomponent single phase alloys10.1103/PhysRevLett.116.135504 ↗
29. Radiation-induced segregation on defect clusters in single-phase concentrated solid-solution alloys10.1016/j.actamat.2017.01.019 ↗
30. Exploring radiation induced segregation mechanisms at grain boundaries in equiatomic CoCrFeNiMn high entropy alloy under heavy ion irradiation10.1016/j.scriptamat.2018.06.041 ↗
31. Microstructural stability and mechanical behavior of FeNiMnCr high entropy alloy under ion irradiation10.1016/j.actamat.2016.05.007 ↗
32. Mechanisms of radiation-induced segregation in CrFeCoNi-based single-phase concentrated solid solution alloys10.1016/j.actamat.2016.12.046 ↗
33. Electrochemical deposition and microstructural characterization of AlCrFeMnNi and AlCrCuFeMnNi high entropy alloy thin films10.1016/j.apsusc.2015.07.142 ↗
34. Heat treatments' effects on the microstructure and mechanical properties of an equiatomic Al-Cr-Fe-Mn-Ni high entropy alloy10.1016/j.msea.2017.02.072 ↗
35. Tensile properties of the Cr–Fe–Ni–Mn non-equiatomic multicomponent alloys with different Cr contents10.1016/j.matdes.2015.08.007 ↗
36. Effects of temperature on the irradiation responses of Al0. 1CoCrFeNi high entropy alloy10.1016/j.scriptamat.2017.09.025 ↗
37. Phase stability of single phase Al0. 12CrNiFeCo high entropy alloy upon irradiation10.1016/j.matdes.2018.11.006 ↗
38. Irradiation resistance in Al x CoCrFeNi high entropy alloys10.1007/s11837-015-1568-4 ↗
39. Phase stability and microstructures of high entropy alloys ion irradiated to high doses10.1016/j.jnucmat.2016.08.017 ↗
40. Liaw · 2015
41. SRIM–The stopping and range of ions in matter10.1016/j.nimb.2010.02.091 ↗
42. Structural materials for fission & fusion energy10.1016/S1369-7021(09)70294-9 ↗
43. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
44. Micro-and mesoscale mechanical properties of an ultra-fine grained CrFeMnNi high entropy alloy produced by large strain machining10.1016/j.scriptamat.2019.11.042 ↗
45. High-throughput Nanomechanical screening of phase-specific and temperature-dependent hardness in Al x FeCrNiMn High-Entropy Alloys10.1007/s11837-019-03714-2 ↗
46. Porter · 2009
47. Microstructure characterization of Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0283-0 ↗
48. Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy10.1016/j.actamat.2010.09.023 ↗
49. Room-temperature deformation behavior of directionally solidified multiphase Ni-Fe-Al alloys10.1007/s11661-997-0066-x ↗
50. The effects of phase transformation on the microstructure and mechanical behavior of FeNiMnCr. 75Alx high-entropy alloys10.1016/j.msea.2018.04.007 ↗
51. Microstructure, chemistry and mechanical properties of Ni-based superalloy Rene N4 under irradiation at room temperature10.1016/j.actamat.2015.04.061 ↗
52. Atomistic modeling of radiation-induced disordering and dissolution at a Ni/Ni 3 Al interface10.1557/jmr.2014.377 ↗
53. The evolution of mechanical property change in irradiated austenitic stainless steels10.1016/0022-3115(93)90129-M ↗
54. Fundamental radiation effects parameters in metals and ceramics10.1080/10420159908229104 ↗
55. Defect structures and hardening mechanisms in high dose helium ion implanted Cu and Cu/Nb multilayer thin films10.1016/j.ijplas.2011.12.007 ↗
56. Radiation damage in nanostructured materials10.1016/j.pmatsci.2018.03.002 ↗
57. Hardening due to interfacial He bubbles in nanolayered composites10.1080/21663831.2015.1110730 ↗
58. Suppression of irradiation hardening in nanoscale V/Ag multilayers10.1016/j.actamat.2011.06.043 ↗
59. On the relationship between uniaxial yield strength and resolved shear stress in polycrystalline materials10.1016/S0022-3115(00)00378-0 ↗
60. Formulating the strength factor α for improved predictability of radiation hardening10.1016/j.jnucmat.2015.07.009 ↗
61. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
62. Chemical short-range ordering and its strengthening effect in refractory high-entropy alloys10.1103/PhysRevB.103.104107 ↗
63. Simultaneously enhancing the ultimate strength and ductility of high-entropy alloys via short-range ordering
64. Stability of γ′ precipitates in nickel based oxide dispersion-strengthened Superalloys under high-temperature and heavy irradiation conditions10.2320/matertrans.M2019050 ↗
65. The stability of precipitates in an irradiation environment10.1016/0022-3115(72)90043-8 ↗
66. Theory of strengthening in fcc high entropy alloys10.1016/j.actamat.2016.07.040 ↗