High heat flux facility GLADIS:
Source abstract
Abstract
The new ion beam facility GLADIS started the operation at IPP Garching. The facility is equipped with two individual 1.1 MW power ion sources for testing actively cooled plasma facing components under high heat fluxes. Each ion source generates heat loads between 3 and 55 MW/m 2 with a beam diameter of 70 mm at the target position. These parameters allow effective testing from probes to large components up to 2 m length. The high heat flux allows the target to be installed inclined to the beam and thus increases the heated surface length up to 200 mm for a heat flux of 15 MW/m 2 in the standard operating regime. Thus the facility has the potential capability for testing of full scale ITER divertor targets. Heat load tests on the WENDELSTEIN 7-X pre-series divertor targets have been successfully started. These tests will validate the design and manufacturing for the production of 950 elements.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Magnetic confinement fusion research · Nuclear reactor physics and engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. R. Duwe, W. Kühnlein, H. Münstermann, in: Proceedings of the 18th Symposium on Fusion Technology, Karlsruhe, 22–26 August 1994, p. 355.
2. M. Diotalevi, M. Febvre, Ph. Chappuis, in: Proceedings of the 19th Symposium on Fusion Technology, Lisbon, 16–20 September 1996, p. 491.
3. D. Youchison et al., in: R.D. Boyd, A.J. Ghajar (Eds.), Heat Transfer in High Heat Flux Systems, ASME Book No. G00956, New York, 1994.
4. Akiba · Plasma Dev. Oper. · 1991 · 202
5. V.K. Gagen-Torn, I.R. Kirillow, V.L. Komarov, et al., in: Proceedings of the 18th Symposium on Fusion Technology, Karlsruhe, Germany, 22–26 August 1994, p. 363.
6. Greuner · Fusion Eng. Des. · 2005 · 75–79 · 34510.1016/j.fusengdes.2005.06.021 ↗
7. Roedig · Fusion Eng. Des. · 2002 · 61&62 · 13510.1016/S0920-3796(02)00113-8 ↗
8. Lochter · Fusion Technol. · 1991 · 19 · 210110.13182/FST91-A29346 ↗
9. H.D. Falter et al., in: Proceedings of the 13th Symposium on Fusion Technology, Varese, Italy 1984, p. 571.
10. Fouquet · Fusion Eng. Des. · 2006 · 81 · 26510.1016/j.fusengdes.2005.06.363 ↗
11. J.-H. Feist et al., in: 10th Symposium on Fusion Engineering Proceedings, Philadelphia, 1983, p. 1494.
12. N. Rust et al., in: 29th EPS Conference on Plasma Physics and Controlled Fusion, ECA, vol. 26B, Montreux, 17–21 June 2002, p. 4045.
13. Boscary · Nucl. Fusion · 2003 · 43 · 83110.1088/0029-5515/43/9/306 ↗