Recent progress of R&D activities on reduced activation ferritic/martensitic steels
Source abstract
Abstract
Several types of reduced activation ferritic/martensitic (RAFM) steel have been developed over the past 30 years in China, Europe, India, Japan, Russia and the USA for application in ITER test blanket modules (TBMs) and future fusion DEMO and power reactors. The progress has been particularly important during the past few years with evaluation of mechanical properties of these steels before and after irradiation and in contact with different cooling media. This paper presents recent RAFM steel results obtained in ITER partner countries in relation to different TBM and DEMO options. (C) 2012 Elsevier B. V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Nuclear reactor physics and engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Baluc · Nucl. Fusion · 2007 · 47 · S69610.1088/0029-5515/47/10/S18 ↗
2. Kurtz · J. Nucl. Mater. · 2009 · 386–388 · 41110.1016/j.jnucmat.2008.12.323 ↗
3. W. Bahm, Materials development – structural materials, nuclear fusion programme annual report of the association Forschungszentrum Karlsruhe/EURATOM, Forschungszentrum Karlsruhe GmbH, Karlsruhe, FZKA 7117, 2005.
4. Huang · Fusion Eng. Des. · 2011 · 86 · 261110.1016/j.fusengdes.2011.03.099 ↗
5. Nishitani · J. Nucl. Mater. · 2009 · 386–388 · 40510.1016/j.jnucmat.2008.12.146 ↗
6. Y. Poitevin, The tritium breeding blankets for fusion reactors – a key component for sustainability of fusion energy, Swiss Nuclear Forum, CRPP/Lausanne, March 23, 2011.
7. Xia · Mater. Sci. Eng. A · 2010 · 528 · 65710.1016/j.msea.2010.09.088 ↗
8. Nagasaka · Fusion Eng. Des. · 2011 · 86 · 258110.1016/j.fusengdes.2010.11.006 ↗
9. Sakasegawa · Fusion Eng. Des. · 2011 · 86 · 254110.1016/j.fusengdes.2011.03.087 ↗
10. Rodríguez · Procedia Eng. · 2011 · 10 · 97710.1016/j.proeng.2011.04.161 ↗
11. Tanigawa · J. Nucl. Mater. · 2011 · 417 · 910.1016/j.jnucmat.2011.05.023 ↗
12. Nogami · J. Nucl. Sci. Technol. · 2010 · 47 · 45710.1080/18811248.2010.9711636 ↗
13. Nogami · J. Nucl. Sci. Technol. · 2010 · 47 · 4710.1080/18811248.2010.9711926 ↗
14. Nogami · J. Nucl. Mater. · 2011 · 417 · 13110.1016/j.jnucmat.2010.12.048 ↗
15. Shiba · Fusion Eng. Des. · 2011 · 86 · 289510.1016/j.fusengdes.2011.06.005 ↗
16. Gaganidze · J. Nucl. Mater. · 2011 · 417 · 9310.1016/j.jnucmat.2010.12.047 ↗
17. Sacksteder · J. Nucl. Mater. · 2011 · 417 · 12710.1016/j.jnucmat.2011.02.012 ↗
18. Materna-Morris · J. Nucl. Mater. · 2009 · 386–388 · 42210.1016/j.jnucmat.2008.12.157 ↗
19. Peng · J. Nucl. Mater. · 2009 · 386–388 · 31210.1016/j.jnucmat.2008.12.119 ↗
20. Huang · J. Nucl. Mater. · 2009 · 386–388 · 40010.1016/j.jnucmat.2008.12.158 ↗
21. Y. Dai, L. Zanini, N. Baluc, G.R. Odette, Utilizing the Swiss spallation neutron source for fusion materials research, Presented at ICFRM-15, Charleston, South Carolina, October 16–22, 2011.10.1080/10448632.2011.546307 ↗
22. van der Schaaf · J. Nucl. Mater. · 2009 · 386-388 · 23610.1016/j.jnucmat.2008.12.329 ↗
23. Henry · J. Nucl. Mater. · 2011 · 417 · 9910.1016/j.jnucmat.2010.12.203 ↗
24. Klimenkov · J. Nucl. Mater. · 2011 · 417 · 12410.1016/j.jnucmat.2010.12.261 ↗
25. Lucon · J. Nucl. Mater. · 2009 · 386–388 · 25410.1016/j.jnucmat.2008.12.109 ↗
26. K. Shiba, E. Wakai, T. Sawai, M. Ando, H. Tanigawa, T. Hirose, et al., Irradiation effects on deformation and fracture of reduced activation ferritic steels, Presented at ICFRM-15, Charleston, South Carolina, USA, October 16–22, 2011.
27. Materna-Morris · Fusion Eng. Des. · 2011 · 86 · 260710.1016/j.fusengdes.2011.03.060 ↗
28. Petersen · J. Nucl. Mater. · 2009 · 386–388 · 29910.1016/j.jnucmat.2008.12.112 ↗
29. Luzginova · J. Nucl. Mater. · 2011 · 409 · 15310.1016/j.jnucmat.2010.09.017 ↗
30. N. Okubo, K. Shiba, M. Ando, T. Hirose, H. Tanigawa, E. Wakai, et al., Reduced activation ferritic/martensitic steel F82H for in-vessel components – improvement of irradiation response of toughness and ductility, Presented at ICFRM-15, Charleston, South Carolina, USA, October 16–22, 2011.
31. M. Ando, M. Li, M. L. Grossbeck, L. T. Gibson, H. Tanigawa, K. Shiba, et al., Creep behavior of RAFM irradiated at 300 and 500°C up to 5dpa, Presented at ICFRM-15, Charleston, South Carolina, USA, October 16–22, 2011.
32. Peng · J. Nucl. Mater. · 2011 · 417 · 99610.1016/j.jnucmat.2010.12.208 ↗
33. G. R. Odette, T. Yamamoto, N. Cunningham, E. Stergar, D. Edwards, The effects of helium on cavity evolution in tempered martensitic steels and nanostructured ferritic alloys – in situ helium implantation studies, Presented at ICFRM-15, Charleston, South Carolina, USA, October 16–22, 2011.
34. Jung · J. Nucl. Mater. · 2011 · 417 · 101310.1016/j.jnucmat.2010.12.045 ↗
35. Gaganidze · J. Nucl. Mater. · 2009 · 386–388 · 34910.1016/j.jnucmat.2008.12.131 ↗
36. Moriyama · Fusion Eng. Des. · 1998 · 39–40 · 62710.1016/S0920-3796(98)00202-6 ↗
37. Giancarli · J. Nucl. Mater. · 2007 · 367–370 · 127110.1016/j.jnucmat.2007.03.234 ↗
38. Petti · Fusion Eng. Des. · 2006 · 81 · 143910.1016/j.fusengdes.2005.08.101 ↗
39. Muroga · Fusion Eng. Des. · 2002 · 61–62 · 1310.1016/S0920-3796(02)00219-3 ↗
40. Moreau · Fusion Eng. Des. · 2011 · 86 · 10610.1016/j.fusengdes.2010.08.050 ↗
41. Chen · Fusion Eng. Des. · 2010 · 85 · 190910.1016/j.fusengdes.2010.06.021 ↗
42. Kondo · Fusion Eng. Des. · 2011 · 86 · 250010.1016/j.fusengdes.2011.01.108 ↗
43. Konys · J. Nucl. Mater. · 2011 · 417 · 119110.1016/j.jnucmat.2010.12.277 ↗
44. Ueki · Fusion Eng. Des. · 2010 · 85 · 182410.1016/j.fusengdes.2010.06.004 ↗
45. Konys · J. Nucl. Mater. · 2007 · 367–370 · 114410.1016/j.jnucmat.2007.03.205 ↗
46. Aiello · J. Nucl. Mater. · 2004 · 329–333 · 139810.1016/j.jnucmat.2004.04.205 ↗
47. Konys · Fusion Eng. Des. · 2010 · 85 · 214110.1016/j.fusengdes.2010.08.018 ↗
48. Zhang · J. Nucl. Mater. · 2011 · 417 · 124510.1016/j.jnucmat.2010.12.285 ↗
49. Yang · J. Nucl. Mater. · 2011 · 417 · 123710.1016/j.jnucmat.2011.03.040 ↗
50. Shikama · Fusion Eng. Des. · 2008 · 83 · 97610.1016/j.fusengdes.2008.07.034 ↗
51. Tanaka · Fusion Eng. Des. · 2008 · 83 · 130010.1016/j.fusengdes.2008.06.020 ↗
52. Yao · J. Nucl. Mater. · 2009 · 386–388 · 70010.1016/j.jnucmat.2008.12.286 ↗
53. Chikada · Fusion Eng. Des. · 2009 · 84 · 59010.1016/j.fusengdes.2008.12.030 ↗
54. Chikada · Fusion Eng. Des. · 2010 · 85 · 153710.1016/j.fusengdes.2010.04.033 ↗
55. Furuya · Fusion Eng. Des. · 2003 · 69 · 38510.1016/S0920-3796(03)00079-6 ↗
56. M. Rieth, A Cost-effective, Large-scale and Fail-safe First Wall Fabrication Method, Portland, Oregon, USA, September 11–16, 2011.
57. H. Tanigawa, H. Tanigawa, T. Hirose, M. Enoeda, H. Serizawa, Y. Kawahito, Manufacturing technology of F82H for application to test blanket module, Presented at ICFRM-15, Charleston, South Carolina, USA, October 16–22, 2011.
58. Li · Fusion Eng. Des. · 2009 · 84 · 118410.1016/j.fusengdes.2008.12.039 ↗
59. Hirose · Fusion Sci. Technol. · 2007 · 52 · 83910.13182/FST07-A1596 ↗
60. Huang · Fusion Eng. Des. · 2011 · 86 · 260210.1016/j.fusengdes.2011.02.089 ↗
61. Rieth · J. Nucl. Mater. · 2009 · 386–388 · 47110.1016/j.jnucmat.2008.12.142 ↗
62. Aubert · J. Nucl. Mater. · 2011 · 417 · 4310.1016/j.jnucmat.2010.12.248 ↗