journal article·2026-03Open access

Guided Wave-based Probabilistic Imaging Using Wavefront Asymmetry for Corrosion Assessment in Metallic Plates

Beata Zima

Abstract

Abstract Corrosion is a critical factor in the degradation of metallic structures, especially in sectors such as maritime, aerospace, and civil infrastructure. Traditional corrosion assessment techniques, while widely used, are limited by their point-based measurements, labor intensity, and susceptibility to human error. This study proposes an advanced non-destructive evaluation (NDE) method combining guided wave propagation with probabilistic imaging to assess global corrosion damage and surface roughness in metallic plates. The approach utilizes Lamb waves, which are sensitive to thickness variations and capable of propagating over large areas with minimal sensor deployment. Key indicators such as wavefront asymmetry, residual signal energy, and correlation-based metrics (RAPID) were analyzed both numerically and experimentally. Corroded plates were modeled using Gaussian random fields and validated through controlled electrochemical degradation experiments. Results demonstrate that guided wave-based indices can effectively detect and monitor corrosion progression, with sensitivity to both the degree of material loss and surface irregularity. Additionally, a reference-free method based on wavefront asymmetry showed potential for practical, in-situ applications. The findings confirm the viability of guided waves as a powerful tool for structural health monitoring, offering enhanced spatial coverage, automation potential, and early-stage damage detection capabilities.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Concrete Corrosion and Durability · Structural Integrity and Reliability Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Cai, Y., Xu, Y., Zhao, Y., Ma, X.: Atmospheric corrosion prediction: A review. Corros. Rev. 38 (2020). https://doi.org/10.1515/corrrev-2019-010010.1515/corrrev-2019-0100 ↗
2. Aghaaminiha, M., Mehrani, R., Colahan, M., Brown, B., Singer, M., Nesic, S., Vargas, S.M., Sharma, S.: Machine learning modeling of time-dependent corrosion rates of carbon steel in presence of corrosion inhibitors. Corros. Sci. 193 (2021). https://doi.org/10.1016/j.corsci.2021.10990410.1016/j.corsci.2021.109904 ↗
3. IACS: Common structural rules for double hull oil tankers and bulk carrier, Link. (2022). https://iacs.org.uk/publications/common-structural-rules/csr-for-bulk-carriers-and-oil-tankers/
4. Naserzadeh, Z., Nohegar, A.: Development of HGAPSO-SVR corrosion prediction approach for offshore oil and gas pipelines. J. Loss Prev. Process. Ind. 84 (2023). https://doi.org/10.1016/j.jlp.2023.10509210.1016/j.jlp.2023.105092 ↗
5. Choi, Y.Y., Lee, S.H., Park, J.C., Choi, D.J., Yoon, Y.S.: The impact of corrosion on marine vapour recovery systems by VOC generated from ships. Int. J. Naval Archit. Ocean. Eng. 11 (2019). https://doi.org/10.1016/j.ijnaoe.2018.01.00210.1016/j.ijnaoe.2018.01.002 ↗
6. IACS, Guidelines for surveys, assessment and repair of hull structure-bulk carriers, Link. (2007). https://iacs.org.uk/download/1863
7. Pérez, N., Matuda, M.Y., Buiochi, F., Adamowski, J.C., Tsuzuki, M.S.G.: Self-compensation methodology for ultrasonic thickness gauges. Ultrasonics. 135 (2023). https://doi.org/10.1016/j.ultras.2023.10710510.1016/j.ultras.2023.107105 ↗
8. Wu, Q., Dong, K., Qin, X., Hu, Z., Xiong, X.: Magnetic particle inspection: Status, advances, and challenges — Demands for automatic non-destructive testing. NDT and E Int. 143 (2024). https://doi.org/10.1016/j.ndteint.2023.10303010.1016/j.ndteint.2023.103030 ↗
9. Le, M., Pham, P.H., Trung, L.Q., Hoang, S.P., Le, D.M., Pham, Q.V., Luong, V.S., E International 146: Enhancing corrosion detection in pulsed eddy current testing systems through autoencoder-based unsupervised learning, NDT and (2024). https://doi.org/10.1016/j.ndteint.2024.10317510.1016/j.ndteint.2024.103175 ↗
10. Roch, E., Zima, B., Woloszyk, K., Garbatov, Y.: Guided waves in ship structural health Monitoring - A feasibility study. Pol. Maritime Res. 30 (2023). https://doi.org/10.2478/pomr-2023-002310.2478/pomr-2023-0023 ↗
11. Reddy, M.S.B., Ponnamma, D., Sadasivuni, K.K., Aich, S., Kailasa, S., Parangusan, H., Ibrahim, M., Eldeib, S., Shehata, O., Ismail, M., Zarandah, R.: Sensors in advancing the capabilities of corrosion detection: A review. Sens. Actuators Phys. 332 (2021). https://doi.org/10.1016/j.sna.2021.11308610.1016/j.sna.2021.113086 ↗
12. Lu, H., Chandran, B., Wu, W., Ninic, J., Gryllias, K., Chronopoulos, D.: Damage features for structural health monitoring based on ultrasonic lamb waves: Evaluation criteria, survey of recent work and outlook. Meas. (Lond). 232 (2024). https://doi.org/10.1016/j.measurement.2024.11466610.1016/j.measurement.2024.114666 ↗
13. Abbas, M., Shafiee, M.: Structural health monitoring (SHM) and determination of surface defects in large metallic structures using ultrasonic guided waves. Sens. (Switzerland). 18 (2018). https://doi.org/10.3390/s1811395810.3390/s18113958 ↗
14. Yang, Z., Yang, H., Tian, T., Deng, D., Hu, M., Ma, J., Gao, D., Zhang, J., Ma, S., Yang, L., Xu, H., Wu, Z.: A review in guided-ultrasonic-wave-based structural health monitoring: From fundamental theory to machine learning techniques. Ultrasonics. 133 (2023). https://doi.org/10.1016/j.ultras.2023.10701410.1016/j.ultras.2023.107014 ↗
15. Yang, Z., Yang, H., Tian, T., Deng, D., Hu, M., Ma, J., Gao, D., Zhang, J., Ma, S., Yang, L., Xu, H., Wu, Z.: A review on guided-ultrasonic-wave-based structural health monitoring: From fundamental theory to machine learning techniques. Ultrasonics. 133, 107014 (2023). https://doi.org/10.1016/J.ULTRAS.2023.10701410.1016/J.ULTRAS.2023.107014 ↗
16. Zima, B., Kędra, R.: Detection and size Estimation of crack in plate based on guided wave propagation. Mech. Syst. Signal. Process. 142, 106788 (2020). https://doi.org/10.1016/j.ymssp.2020.10678810.1016/j.ymssp.2020.106788 ↗
17. Li, L., Fromme, P.: Mode conversion of fundamental guided ultrasonic wave modes at part-thickness crack-like defects. Ultrasonics. 142, 107399 (2024). https://doi.org/10.1016/J.ULTRAS.2024.10739910.1016/J.ULTRAS.2024.107399 ↗
18. El-Kettani, E.C., Luppé, F., Guillet, A.: Guided waves in a plate with linearly varying thickness: Experimental and numerical results. Ultrasonics. (2004). https://doi.org/10.1016/j.ultras.2004.01.07110.1016/j.ultras.2004.01.071 ↗
19. Suresh, N., Balasubramaniam, K.: Remnant thickness quantification in small thickness structures utilising the cut-off property of A1 lamb wave mode employing linear array elements. J. Appl. Phys. 131 (2022). https://doi.org/10.1063/5.008510210.1063/5.0085102 ↗
20. Benstock, D., Cegla, F., Stone, M.: The influence of surface roughness on ultrasonic thickness measurements. J. Acoust. Soc. Am. 136, 3028–3039 (2014). https://doi.org/10.1121/1.490056510.1121/1.4900565 ↗
21. Zima, B.: Determination of stepped plate thickness distribution using guided waves and compressed sensing approach. Meas. (Lond). 196 (2022). https://doi.org/10.1016/j.measurement.2022.11122110.1016/j.measurement.2022.111221 ↗
22. Zima, B., Moll, J.: Theoretical and experimental analysis of guided wave propagation in plate-like structures with sinusoidal thickness variations. Archives Civil Mech. Eng. 23 (2023). https://doi.org/10.1007/s43452-022-00564-910.1007/s43452-022-00564-9 ↗
23. Sriramadasu, R.C., Banerjee, S., Lu, Y.: Detection and assessment of pitting corrosion in rebars using scattering of ultrasonic guided waves. NDT E Int. 101, 53–61 (2019). https://doi.org/10.1016/J.NDTEINT.2018.10.00510.1016/J.NDTEINT.2018.10.005 ↗
24. Sriramadasu, R.C., Banerjee, S., Lu, Y.: Sensitivity of longitudinal guided wave modes to pitting corrosion of rebars embedded in reinforced concrete. Constr. Build. Mater. 239, 117855 (2020). https://doi.org/10.1016/J.CONBUILDMAT.2019.11785510.1016/J.CONBUILDMAT.2019.117855 ↗
25. Cawley, P.: Guided waves in long range nondestructive testing and structural health monitoring: Principles, history of applications and prospects. NDT E Int. 142, 103026 (2024). https://doi.org/10.1016/J.NDTEINT.2023.10302610.1016/J.NDTEINT.2023.103026 ↗
26. Nagy, P.B., Simonetti, F., Instanes, G.: Corrosion and erosion monitoring in plates and pipes using constant group velocity lamb wave inspection. Ultrasonics. 54, 1832–1841 (2014). https://doi.org/10.1016/J.ULTRAS.2014.01.01710.1016/J.ULTRAS.2014.01.017 ↗
27. Zima, B., Woloszyk, K., Garbatov, Y.: Experimental and numerical identification of corrosion degradation of ageing structural components. Ocean Eng. 258, 111739 (2022). https://doi.org/10.1016/J.OCEANENG.2022.11173910.1016/J.OCEANENG.2022.111739 ↗
28. Zima, B., Moll, J.: Corrosion damage identification based on the symmetry of propagating wavefield measured by a circular array of piezoelectric transducers: Theoretical, experimental and numerical studies. Mech. Syst. Signal. Process. 217 (2024). https://doi.org/10.1016/j.ymssp.2024.11153810.1016/j.ymssp.2024.111538 ↗
29. Ricci, F., Monaco, E., Boffa, N.D., Maio, L., Memmolo, V.: Guided waves for structural health monitoring in composites: A review and implementation strategies. Prog. Aerosp. Sci. 129 (2022). https://doi.org/10.1016/j.paerosci.2021.10079010.1016/j.paerosci.2021.100790 ↗
30. Zhao, X., Gao, H., Zhang, G., Ayhan, B., Yan, F., Kwan, C., Rose, J.L.: Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring. Smart Mater. Struct. 16 (2007). https://doi.org/10.1088/0964-1726/16/4/03210.1088/0964-1726/16/4/032 ↗
31. Ling, J., Rayhana, R., Liu, Z., Liao, M., Yang, C., Schnabel, A., Neubeck, R., Wunderlich, C.: LSDC-RC-RAPID: An improved probabilistic reconstruction approach for pipeline corrosion detection with UGWT. IEEE Trans. Instrum. Meas. (2025). https://doi.org/10.1109/TIM.2025.356683910.1109/TIM.2025.3566839 ↗
32. Wang, J., Shen, Y.: An enhanced lamb wave virtual time reversal technique for damage detection with transducer transfer function compensation. Smart Mater. Struct. 28 (2019). https://doi.org/10.1088/1361-665X/ab1fc810.1088/1361-665X/ab1fc8 ↗
33. Cantero-Chinchilla, S., Chiachío, J., Chiachío, M., Chronopoulos, D., Jones, A.: A robust bayesian methodology for damage localization in plate-like structures using ultrasonic guided-waves. Mech. Syst. Signal. Process. 122 (2019). https://doi.org/10.1016/j.ymssp.2018.12.02110.1016/j.ymssp.2018.12.021 ↗
34. Zeng, X., Liu, X., Yan, J., Yu, Y., Zhao, B., Qing, X.: Lamb wave-based damage localization and quantification algorithms for CFRP composite structures. Compos. Struct. 295 (2022). https://doi.org/10.1016/j.compstruct.2022.11584910.1016/j.compstruct.2022.115849 ↗
35. Qiu, J., Li, F., Abbas, S., Zhu, Y.: A baseline-free damage detection approach based on distance compensation of guided waves. J. Low Freq. Noise Vib. Act. Control. 38 (2019). https://doi.org/10.1177/146134841881369910.1177/1461348418813699 ↗
36. Tabatabaeipour, M., Hettler, J., Delrue, S., Van Den Abeele, K.: Visualization of delaminations in composite structures using a baseline-free, sparse array imaging technique based on nonlinear lamb wave propagation. Acta Acustica United Acustica. 103 (2017). https://doi.org/10.3813/AAA.91912810.3813/AAA.919128 ↗
37. Jin, H., Yan, J., Liu, X., Li, W., Qing, X.: Quantitative defect inspection in the curved composite structure using the modified probabilistic tomography algorithm and fusion of damage index. Ultrasonics. 113 (2021). https://doi.org/10.1016/j.ultras.2021.10635810.1016/j.ultras.2021.106358 ↗
38. Azuara, G., Barrera, E., Ruiz, M., Bekas, D.: Damage detection and characterization in composites using a geometric modification of the RAPID algorithm. IEEE Sens. J. 20 (2020). https://doi.org/10.1109/JSEN.2019.295074810.1109/JSEN.2019.2950748 ↗
39. Zhao, X., Royer, R.L., Owens, S.E., Rose, J.L.: Ultrasonic lamb wave tomography in structural health monitoring. Smart Mater. Struct. 20 (2011). https://doi.org/10.1088/0964-1726/20/10/10500210.1088/0964-1726/20/10/105002 ↗
40. Wang, D., Ye, L., Lu, Y., Su, Z.: Probability of the presence of damage estimated from an active sensor network in a composite panel of multiple stiffeners. Compos. Sci. Technol. 69 (2009). https://doi.org/10.1016/j.compscitech.2008.11.00510.1016/j.compscitech.2008.11.005 ↗
41. Zima, B., Moll, J.: Numerical and experimental investigation of guided ultrasonic wave propagation in non-uniform plates with structural phase variations. Ultrasonics. 128, 106885 (2023). https://doi.org/10.1016/J.ULTRAS.2022.10688510.1016/J.ULTRAS.2022.106885 ↗
42. Luo, K., Chen, L., Chen, Y., Ye, L., Yu, S.: An ultrasonic lamb wave-based non-linear exponential RAPID method for delamination detection in composites. Compos. Struct. 352 (2025). https://doi.org/10.1016/j.compstruct.2024.11870110.1016/j.compstruct.2024.118701 ↗
43. Htun, M.M., Kawamura, Y., Ajiki, M.: A study on random field model for representation of geometry of corroded plates and Estimation of stochastic properties of their strength. J. Japan Soc. Naval Architects Ocean. Eng. 18 (2013). https://doi.org/10.2534/jjasnaoe.18.9110.2534/jjasnaoe.18.91 ↗
44. Huang, S.P., Quek, S.T., Phoon, K.K.: Convergence study of the truncated Karhunen-Loeve expansion for simulation of stochastic processes. Int. J. Numer. Methods Eng. 52 (2001). https://doi.org/10.1002/nme.25510.1002/nme.255 ↗
45. Contantine, P.: Paul Constantine Random Field Simulation (2024). https://www.mathworks.com/matlabcentral/fileexchange/27613-random-field-simulation), MATLAB Central File Exchange. Retrieved August 27, 2024., (2024)