Quantitative Analysis of Anisotropic Magnetic Memory Signals of Wire and Arc Additively Manufactured Low Carbon Steel

1. Patel, S., Liu, Y., Siddique, Z., Ghamarian, I.: Metal additive manufacturing: Principles and applications. J. Manuf. Process. 131, 1179–1201 (2024). https://doi.org/10.1016/j.jmapro.2024.09.10110.1016/j.jmapro.2024.09.101 ↗

2. Zhou, L., Miller, J., Vezza, J., Mayster, M., Raffay, M., Justice, Q., Al Tamimi, Z., Hansotte, G., Sunkara, L.D., Bernat, J.: Additive Manufacturing: Compr. Rev. Sens. 24, 2668 (2024). https://doi.org/10.3390/s2409266810.3390/s24092668 ↗

3. Buchanan, C., Gardner, L.: Metal 3D printing in construction: A review of methods, research, applications, opportunities and challenges. Eng. Struct. 180, 332–348 (2019). https://doi.org/10.1016/j.engstruct.2018.11.04510.1016/j.engstruct.2018.11.045 ↗

4. Tomar, B., Shiva, S., Nath, T.: A review on wire Arc additive manufacturing: Processing parameters, defects, quality improvement and recent advances. Mater. Today Commun. 31, 103739 (2022). https://doi.org/10.1016/j.mtcomm.2022.10373910.1016/j.mtcomm.2022.103739 ↗

5. Jin, W., Zhang, C., Jin, S., Tian, Y., Wellmann, D., Liu, W.: Wire Arc additive manufacturing of stainless steels: A review. Appl. Sci. 10, 1563 (2020). https://doi.org/10.3390/app1005156310.3390/app10051563 ↗

6. Meena, R.P., Vipin, Y.N.: A review on wire Arc additive manufacturing based on cold metal transfer. Mater. Manuf. Process. 39, 1315–1341 (2024). https://doi.org/10.1080/10426914.2024.232344110.1080/10426914.2024.2323441 ↗

7. Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., Norrish, J.: A review of the wire Arc additive manufacturing of metals: Properties, defects and quality improvement. J. Manuf. Process. 35, 127–139 (2018). https://doi.org/10.1016/j.jmapro.2018.08.00110.1016/j.jmapro.2018.08.001 ↗

8. Saleh, B., Fathi, R., Tian, Y., Radhika, N., Jiang, J., Ma, A.: Fundamentals and advances of wire Arc additive manufacturing: Materials, process parameters, potential applications, and future trends. Arch. Civ. Mech. Eng. 23, 96 (2023). https://doi.org/10.1007/s43452-023-00633-710.1007/s43452-023-00633-7 ↗

9. Gurmesa, F., Lemu, H., Adugna, Y., Harsibo, M.: Residual stresses in wire Arc additive manufacturing products and their measurement techniques: A systematic review. Appl. Mech. 5, 420–449 (2024). https://doi.org/10.3390/applmech503002510.3390/applmech5030025 ↗

10. Ghaffari, M., Vahedi Nemani, A., Rafieazad, M., Nasiri, A.: Effect of solidification defects and HAZ softening on the anisotropic mechanical properties of a wire Arc Additive-Manufactured Low-Carbon Low-Alloy steel part. JOM. 71, 4215–4224 (2019). https://doi.org/10.1007/s11837-019-03773-510.1007/s11837-019-03773-5 ↗

11. Kyvelou, P., Slack, H., Daskalaki Mountanou, D., Wadee, M.A., Britton, T.B., Buchanan, C., Gardner, L.: Mechanical and microstructural testing of wire and Arc additively manufactured sheet material. Mater. Des. 192, 108675 (2020). https://doi.org/10.1016/j.matdes.2020.10867510.1016/j.matdes.2020.108675 ↗

12. Liu, Y., Wang, X., Oliveira, J.P., He, J., Guan, X.: Spatial and directional characterization of wire and Arc additive manufactured aluminum alloy using phased array ultrasonic backscattering method. Ultrasonics. 132, 107024 (2023). https://doi.org/10.1016/j.ultras.2023.10702410.1016/j.ultras.2023.107024 ↗

13. Walker, J., Mills, B., Javadi, Y., MacLeod, C., Sun, Y., Taraphdar, P.K., Ahmad, B., Gurumurthy, S., Ding, J., Sillars, F.: Study of residual stress using phased array ultrasonics in Ti-6AL-4V Wire-Arc additively manufactured components. Sensors. 24, 6372 (2024). https://doi.org/10.3390/s2419637210.3390/s24196372 ↗

14. Zhang, J., Xing, Y., Zhang, J., Cao, J., Yang, F., Zhang, X.: Effects of In-Process ultrasonic vibration on weld formation and grain size of wire and Arc additive manufactured parts. Materials. 15, 5168 (2022). https://doi.org/10.3390/ma1515516810.3390/ma15155168 ↗

15. Du, W., Bai, Q., Wang, Y., Zhang, B.: Eddy current detection of subsurface defects for additive/subtractive hybrid manufacturing. Int. J. Adv. Manuf. Technol. 95, 3185–3195 (2018). https://doi.org/10.1007/s00170-017-1354-210.1007/s00170-017-1354-2 ↗

16. Farag, H.E., Toyserkani, E., Khamesee, M.B.: Non-Destructive testing using eddy current sensors for defect detection in additively manufactured titanium and Stainless-Steel parts. Sensors. 22, 5440 (2022). https://doi.org/10.3390/s2214544010.3390/s22145440 ↗

17. Zimermann, R., Mohseni, E., Foster, E.A., Vasilev, M., Loukas, C., Vithanage, R.K.W., Macleod, C.N., Lines, D., Silva, M.P.E.E., Fitzpatrick, S., Halavage, S., McKegney, S., Rizwan, M.K., Pierce, S.G., Williams, S., Ding, J.: In-process non-destructive evaluation of metal additive manufactured components at build using ultrasound and eddy-current approaches. J. Manuf. Process. 107, 549–558 (2023). https://doi.org/10.1016/j.jmapro.2023.10.06310.1016/j.jmapro.2023.10.063 ↗

18. Lopez, A., Bacelar, R., Pires, I., Santos, T.G., Sousa, J.P., Quintino, L.: Non-destructive testing application of radiography and ultrasound for wire and Arc additive manufacturing. Addit. Manuf. 21, 298–306 (2018). https://doi.org/10.1016/j.addma.2018.03.02010.1016/j.addma.2018.03.020 ↗

19. Mountassir, M.E., Flotte, D., Yaacoubi, S., Riff, E., Ferrari, M., Chauveau, D., Bourlet, C., Bernet, S.: A novel approach to enhance defect detection in wire Arc additive manufacturing parts using radiographic testing without surface milling. J. Intell. Manuf. (2024). https://doi.org/10.1007/s10845-024-02328-z10.1007/s10845-024-02328-z ↗

20. Zou, J., Gaber, Y., Voulazeris, G., Li, S., Vazquez, L., Liu, L.-F., Yao, M.-Y., Wang, Y.-J., Holynski, M., Bongs, K., Attallah, M.M.: Controlling the grain orientation during laser powder bed fusion to tailor the magnetic characteristics in a Ni-Fe based soft magnet. Acta Mater. 158, 230–238 (2018). https://doi.org/10.1016/j.actamat.2018.07.06410.1016/j.actamat.2018.07.064 ↗

21. Evlashin, S.A., Volkova, A.A., Mendagaliev, R.V., Babkin, K.D., Bondareva, J.V., Simonov, A.P., Kuzminova, Y.O., Dubinin, O.N., Chernodubov, D.A., Shibalova, A.A., Kobykhno, I.A., Klimova-Korsmik, O.G.: Magnetic and mechanical properties of 316L/410L/316L sandwich structure produced by direct energy deposition. Mater. Today Commun. 37, 107230 (2023). https://doi.org/10.1016/j.mtcomm.2023.10723010.1016/j.mtcomm.2023.107230 ↗

22. Dubov, A.A.: A study of metal properties using the method of magnetic memory. Met. Sci. Heat. Treat. 39, 401–405 (1997). https://doi.org/10.1007/BF0246906510.1007/BF02469065 ↗

23. Bao, S., Jin, P., Zhao, Z., Fu, M.: A review of the metal magnetic memory method. J. Nondestruct Eval. 39, 11 (2020). https://doi.org/10.1007/s10921-020-0652-z10.1007/s10921-020-0652-z ↗

24. Wang, Z.D., Gu, Y., Wang, Y.S.: A review of three magnetic NDT technologies. J. Magn. Magn. Mater. 324, 382–388 (2012). https://doi.org/10.1016/j.jmmm.2011.08.04810.1016/j.jmmm.2011.08.048 ↗

25. Shi, P., Su, S., Chen, Z.: Overview of researches on the nondestructive testing method of metal magnetic memory: Status and challenges. J. Nondestruct Eval. 39, 43 (2020). https://doi.org/10.1007/s10921-020-00688-z10.1007/s10921-020-00688-z ↗

26. Liu, X., Su, S., Wang, W., Li, J., Zuo, F., Deng, R.: Quantitative evaluation of corrosion defects on structural steel plates via metal magnetic memory method. Res. Nondestruct Eval. 34, 169–185 (2023). https://doi.org/10.1080/09349847.2023.222119610.1080/09349847.2023.2221196 ↗

27. Roskosz, M., Bieniek, M.: Analysis of the universality of the residual stress evaluation method based on residual magnetic field measurements. NDT E Int. 54, 63–68 (2013). https://doi.org/10.1016/j.ndteint.2012.12.00410.1016/j.ndteint.2012.12.004 ↗

28. Roskosz, M., Rusin, A., Bieniek, M.: Analysis of relationships between residual magnetic field and residual stress. Meccanica. 48, 45–55 (2013). https://doi.org/10.1007/s11012-012-9582-x10.1007/s11012-012-9582-x ↗

29. Dong, S., Wang, D., Xu, B., Shi, C.: Characterizing stress concentration by metal magnetic memory signal of h_p (x). Int. J. Appl. Electromagn. Mech. 33, 1219–1223 (2010). https://doi.org/10.3233/JAE-2010-124110.3233/JAE-2010-1241 ↗

30. Bao, S., Lou, H., Zhao, Z.: Evaluation of stress concentration degree of ferromagnetic steels based on residual magnetic field measurements. J. Civ. Struct. Health Monit. 10, 109–117 (2020). https://doi.org/10.1007/s13349-019-00372-510.1007/s13349-019-00372-5 ↗

31. Li, J., Su, S., Wang, W., Liu, X., Zuo, F.: Fast reconstruction method for defect profiles of ferromagnetic materials based on metal magnetic memory technique. Measurement. 215, 112885 (2023). https://doi.org/10.1016/j.measurement.2023.11288510.1016/j.measurement.2023.112885 ↗

32. Liu, B., Wang, F.C., Wu, Z.H., Lian, Z., He, L.Y., Yang, L.J., Tian, R.F., Geng, H., Tian, Y.: Research on magnetic memory inspection signal characteristics of multi-parameter coupling pipeline welds. NDT E Int. 143, 103019 (2024). https://doi.org/10.1016/j.ndteint.2023.10301910.1016/j.ndteint.2023.103019 ↗

33. Xu, K., Yang, K., Liu, J., Wang, Y.: Study on metal magnetic memory signal of buried defect in fracture process. J. Magn. Magn. Mater. 498, 166139 (2020). https://doi.org/10.1016/j.jmmm.2019.16613910.1016/j.jmmm.2019.166139 ↗

34. Su, S., Li, J., Wang, W., Liu, X., Zuo, F., Deng, R.: Quantitative study of the defects of ferromagnetic materials using the magnetic charge model and particle swarm optimization algorithm. J. Magn. Magn. Mater. 564, 170076 (2022). https://doi.org/10.1016/j.jmmm.2022.17007610.1016/j.jmmm.2022.170076 ↗

35. Qiu, G., Cai, Y., Li, Z.: Multiscale investigation of magnetic field distortion on surface of ferromagnetic materials caused by stress concentration for metal magnetic memory method. Comput. Mater. Sci. 209, 111353 (2022). https://doi.org/10.1016/j.commatsci.2022.11135310.1016/j.commatsci.2022.111353 ↗

36. Li, X., Sheng, G., Meng, Z., Qin, F., Liu, Z.: Magnetic charge model for leakage signals from surface defects in ferromagnetic material. Materials. 16, 3750 (2023). https://doi.org/10.3390/ma1610375010.3390/ma16103750 ↗

37. Chen, Q., Zhang, J., Li, B.: Finite element simulation and test of metal magnetic memory detection of wire rope under weak magnetic field. J. Fail. Anal. Prev. 23, 351–360 (2023). https://doi.org/10.1007/s11668-022-01553-z10.1007/s11668-022-01553-z ↗

38. Su, S., Liu, X., Wang, W., Li, J., Deng, R.: A review of metal magnetic memory technology in civil engineering. J. Magn. Magn. Mater. 603, 172231 (2024). https://doi.org/10.1016/j.jmmm.2024.17223110.1016/j.jmmm.2024.172231 ↗

39. Liu, B., Fu, P., Gu, J., He, P., Fang, J., Dong, L.: Study on the influence of ultrasonic impact treatment (UIT) on stress evaluation of laser cladding coating by using metal magnetic memory technology. Eng. Fail. Anal. 143, 106936 (2023). https://doi.org/10.1016/j.engfailanal.2022.10693610.1016/j.engfailanal.2022.106936 ↗

40. Liu, B., Gong, K., Qiao, Y., Dong, S.: Evaluation of influence of preset crack burial depth on stress of laser cladding coating with metal magnetic memory. Acta Met. Sin. 52, 241–248 (2016)

41. Armstrong, W.D.: An incremental theory of magneto-elastic hysteresis in pseudo-cubic ferro-magnetostrictive alloys. J. Magn. Magn. Mater. 263, 208–218 (2003). https://doi.org/10.1016/S0304-8853(02)01567-610.1016/S0304-8853(02)01567-6 ↗

42. Ramesh, A., Jiles, D.C., Roderick, J.M.: A model of anisotropic anhysteretic magnetization. IEEE Trans. Magn. 32, 4234–4236 (1996). https://doi.org/10.1109/20.53934410.1109/20.539344 ↗

43. Zhang, P., Shi, P., Jin, K., Zheng, X.: An anisotropic magneto-mechanical model of ferromagnetic materials for the magnetic memory testing method. J. Appl. Phys. 125, 233901 (2019). https://doi.org/10.1063/1.509484010.1063/1.5094840 ↗

44. Li, Y., Bao, S.: Anisotropic magnetic memory signal of low-carbon steel fabricated by wire-arc directed energy deposition. Measurement. 250, 117117 (2025). https://doi.org/10.1016/j.measurement.2025.11711710.1016/j.measurement.2025.117117 ↗

45. Wang, Z.D., Yao, K., Deng, B., Ding, K.Q.: Quantitative study of metal magnetic memory signal versus local stress concentration. NDT E Int. 43, 513–518 (2010). https://doi.org/10.1016/j.ndteint.2010.05.00710.1016/j.ndteint.2010.05.007 ↗

46. Bao, S., Liu, X., Zhang, D.: Variation of residual magnetic field of defective U75V steel subjected to tensile stress. Strain. 51, 370–378 (2015). https://doi.org/10.1111/str.1214710.1111/str.12147 ↗

47. He, Y., Mehdi, M., Hilinski, E.J., Edrisy, A.: Through-process characterization of local anisotropy of Non-oriented electrical steel using magnetic Barkhausen noise. J. Magn. Magn. Mater. 453, 149–162 (2018). https://doi.org/10.1016/j.jmmm.2018.01.02310.1016/j.jmmm.2018.01.023 ↗

48. DebRoy, T., Wei, H.L., Zuback, J.S., Mukherjee, T., Elmer, J.W., Milewski, J.O., Beese, A.M., Wilson-Heid, A., De, A., Zhang, W.: Additive manufacturing of metallic components– Process, structure and properties. Prog Mater. Sci. 92, 112–224 (2018). https://doi.org/10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗

49. Mukherjee, T., Zuback, J.S., De, A., DebRoy, T.: Printability of alloys for additive manufacturing. Sci. Rep. 6, 19717 (2016). https://doi.org/10.1038/srep1971710.1038/srep19717 ↗

50. Rafieazad, M., Nemani, A.V., Ghaffari, M., Nasiri, A.: On microstructure and mechanical properties of a Low-Carbon Low-Alloy steel block fabricated by wire Arc additive manufacturing. J. Mater. Eng. Perform. 30, 4937–4945 (2021). https://doi.org/10.1007/s11665-021-05568-910.1007/s11665-021-05568-9 ↗

51. Sridharan, N., Noakes, M.W., Nycz, A., Love, L.J., Dehoff, R.R., Babu, S.S.: On the toughness scatter in low alloy C-Mn steel samples fabricated using wire Arc additive manufacturing. Mater. Sci. Eng. A. 713, 18–27 (2018). https://doi.org/10.1016/j.msea.2017.11.10110.1016/j.msea.2017.11.101 ↗

52. Li, B., Fu, W., Xu, H., Qian, B., Xuan, F.: Additively manufactured Ni-15Fe-5Mo permalloy via selective laser melting and subsequent annealing for magnetic-shielding structures: Process, micro-structural and soft-magnetic characteristics. J. Magn. Magn. Mater. 494, 165754 (2020). https://doi.org/10.1016/j.jmmm.2019.16575410.1016/j.jmmm.2019.165754 ↗

53. Zaied, M., Ospina-Vargas, A., Buiron, N., Favergeon, J., Fenineche, N.-E., Additive Manufacturing of Soft Ferromagnetic Fe 6.5%Si Annular Cores: Process Parameters, Microstructure, and, Properties, M.: IEEE Trans. Magn. 58 1–9. (2022). https://doi.org/10.1109/TMAG.2022.320263110.1109/TMAG.2022.3202631 ↗

54. Zhong, L., Li, L., Chen, X.: Magnetic signals of stress concentration detected in different magnetic environment. Nondestruct Test. Eval. 25, 161–168 (2010). https://doi.org/10.1080/1058975090286660510.1080/10589750902866605 ↗