Inversion Based Retrieval of the Profile of the Degree of Moisture Saturation in Concrete Using Electrical Impedance Measurements
Source abstract
Abstract
Moisture content has implications on the durability and service life of a concrete structure. Measurement of the moisture content is usually performed via non-invasive electrical techniques. In this paper, the electrical response of hardened concrete is acquired and correlated to the Degree of Saturation (DoS) of the material. The pulsed electrical excitation is imposed on the sample and the output is recorded at various electrode locations along the sample length. Using a one dimensional circuit model and a Gaussian and Inverse Multiquadric Radial Basis Function (RBF) based inversion scheme, the cumulative and spatial distribution of the real and imaginary parts of the impedance are re-constructed along the length of the sample. An excellent fit with the experimental data is observed and an empirical relationship is proposed between the DoS and the absolute impedance, which would facilitate the estimation of the DoS profile in samples with homogeneous and non-homogeneous moisture distribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical and Bioimpedance Tomography · Geophysical Methods and Applications · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Huang, Q., Jiang, Z., Gu, X., Zhang, W., Guo, B.: Numerical simulation of moisture transport in concrete based on a pore size distribution model. Cem. Concr. Res. 67, 31–43 (2015)10.1016/j.cemconres.2014.08.003 ↗
2. López, W., Gonzalez, J.A.: Influence of the degree of pore saturation on the resistivity of concrete and the corrosion rate of steel reinforcement. Cem. Concr. Res. 23, 368–376 (1993)10.1016/0008-8846(93)90102-F ↗
3. Giarma, C.: Estimation of carbonation depth based on hygrothermal calculations. ACI Mater. J. 108, 209–218 (2011)
4. Rucker-Gramm, P., Beddoe, R.E.: Effect of moisture content of concrete on water uptake. Cem. Concr. Res. 40, 102–108 (2010)10.1016/j.cemconres.2009.09.001 ↗
5. Zhou, C.: General solution of hydraulic diffusivity from sorptivity test. Cem. Concr. Res. 58, 152–160 (2014)10.1016/j.cemconres.2014.01.019 ↗
6. Hall, C., Yau, M.H.R.: Water movement in porous building materials-IX. The water absorption and sorptivity of concretes. Build. Environ. 22, 77–82 (1987)10.1016/0360-1323(87)90044-8 ↗
7. Sánchez, I., Antón, C., de Vera, G., Ortega, J.M., Climent, M.A.: Moisture distribution in partially saturated concrete studied by impedance spectroscopy. J. Nondestruct. Eval. 32, 362–371 (2013)10.1007/s10921-013-0190-z ↗
8. Mukhlisin, M., Baidillah, M.R., Taha, M.R.: Electrical capacitance volume tomography for measurement soil water infiltration in vessel experiments. J. Cent. South Univ. 21, 358–364 (2014)10.1007/s11771-014-1948-x ↗
9. Karhunen, K., Seppänen, A., Lehikoinen, A., Monteiro, P.J.M., Kaipio, J.P.: Electrical resistance tomography imaging of concrete. Cem. Concr. Res. 40, 137–145 (2010)10.1016/j.cemconres.2009.08.023 ↗
10. Buettner, M., Ramirez, A., Daily, W.: Electrical resistance tomography for imaging the spatial distribution of moisture in pavement sections. In: Structural Materials Technology an NDT Conference, San Diego, CA (1996)
11. Daily, W., Ramirez, A., Binley, A., Henry-Poulter, S.: Electrical resistance tomography of concrete structures. In: ECAPT94: 3rd European Concerted Action Meeting on Process Tomography, Lisbon (1994).
12. Buettner, M., Ramirez, A., Daily, W.: Electrical resistance tomography for imaging concrete structures. In: Structural Materials Technology an NDT Conference, San Diego, CA, (1996)
13. Du Plooy, R., Villain, G., Palma Lopes, S., Ihamouten, A., Dérobert, X., Thauvin, B.: Electromagnetic non-destructive evaluation techniques for the monitoring of water and chloride ingress into concrete: a comparative study. Mater. Struct. 48, 369–386 (2015)10.1617/s11527-013-0189-z ↗
14. Hallaji, M., Pour-Ghaz, M.: A new sensing skin for qualitative damage detection in concrete elements: rapid difference imaging with electrical resistance tomography. NDT&E Int. 68, 13–21 (2014)10.1016/j.ndteint.2014.07.006 ↗
15. Smyl, D., Hallaji, M., Seppänen, A., Pour-Ghaz, M.: Quantitative electrical imaging of three-dimensional moisture flow in cement-based materials. Int. J. Heat Mass Transf. (2016)10.1016/j.ijheatmasstransfer.2016.08.039 ↗
16. Smyl, D., Hallaji, M., Seppänen, A., Pour-Ghaz, M.: Three-dimensional electrical impedance tomography to monitor unsaturated moisture ingress in cement-based materials. Transp. Porous Med. 115, 101–124 (2016)10.1007/s11242-016-0756-1 ↗
17. Voss, A., Seppänen, A., Siltanen, S., Salokangas, L., Baroudi, D.: Imaging of moisture content in wood using electrical capacitance tomography. In: World Conference on Timber Engineering, Vienna, Austria (2016)
18. Voss, A., Pour-Ghaz, M., Vauhkonen, M., Seppänen, A.: Electrical Capacitance Tomography to monitor unsaturated moisture ingress in cement-based materials. In: 8th European Workshop On Structural Health Monitoring (EWSHM 2016), Spain, Bilbao (2016)10.1016/j.cemconres.2016.07.011 ↗
19. Voss, A., Pour-Ghaz, M., Vauhkonen, M., Seppänen, A.: Electrical capacitance tomography to monitor unsaturated moisture ingress in cement-based materials. Cem. Concr. Res. 89, 158–167 (2016)10.1016/j.cemconres.2016.07.011 ↗
20. Voss, A., Pour-Ghaz, M., Vauhkonen, M., Seppänen, A.: Retrieval of the saturated hydraulic conductivity of cement-based materials using electrical capacitance tomography. Cem. Concr. Compos. 112, 103639 (2020)10.1016/j.cemconcomp.2020.103639 ↗
21. Dey, G., Ganguli, A., Bhattacharjee, B.: Electrical conductivity, dielectric permittivity, and degree of saturation of cement mortar at low radio frequencies. J. Test. Eval. (2019). https://doi.org/10.1520/JTE2017007410.1520/JTE20170074 ↗
22. Dey, G.: Electrical impedance-based technique for estimation of moisture saturation conditions of hardened cement paste at low radio frequencies. J. Nondestruct. Eval. (2020). https://doi.org/10.1007/s10921-020-00710-410.1007/s10921-020-00710-4 ↗
23. Dey, G., Ganguli, A., Bhattacharjee, B., Gandhi, T.K.: Electrical response-based technique for estimation of degree of moisture saturation in cement concrete and mortar in drying and wetting cycle. Constr. Build. Mater. (2020). https://doi.org/10.1016/j.conbuildmat.2020.12085510.1016/j.conbuildmat.2020.120855 ↗
24. Morigi, S., Sgallari, F.: A regularizing L-curve Lanczos method for underdetermined linear systems. Appl. Math. Comput. 121, 55–73 (2001)
25. Calvetti, D., Reichel, L.: Tikhonov regularization with a solution constraint. Siam J. Sci. Comput. 26(1), 224–239 (2004)10.1137/S1064827502412280 ↗
26. Rocha, H.: On the selection of the most adequate radial basis function. Appl. Math. Model. 33, 1573 (2009)10.1016/j.apm.2008.02.008 ↗
27. Mongillo, M.: Choosing basis functions and shape parameters for radial basis function methods. SIAM 4, 2–6 (2011)
28. Lawson, C.L., Hanson, R.J.: Solving Least Square Problems. SIAM, Philadelphia (1995)10.1137/1.9781611971217 ↗
29. Rashidinia, J., Fasshauer, G.E., Khasi, M.: A stable method for the evaluation of Gaussian radial basis function solutions of interpolation and collocation problems. Comput. Math. Appl. 72, 178 (2016)10.1016/j.camwa.2016.04.048 ↗
30. Engl, H.W., Grever, W.: Using the L-curve for determining optimal regularization parameters. Num. Math. 69, 25 (1994)10.1007/s002110050078 ↗
31. Hansen, P.A.: Analysis of discrete ill posed problems by means of the L-curve. SIAM Rev. 34, 561 (1992)10.1137/1034115 ↗
32. Calvetti, D., Morigi, S., Reichel, L., Sgallari, F.: Tikhonov regularization and the L-curve for large discrete ill-posed problems. J. Comput. Appl. Math. 123, 423 (2000)10.1016/S0377-0427(00)00414-3 ↗
33. Liu, W., Wang, B.: A modified approximate method based on Gaussian radial basis functions. Eng. Anal. Bound. Elem. (2018). https://doi.org/10.1016/j.enganabound.2018.05.01210.1016/j.enganabound.2018.05.012 ↗
34. Rippa, S.: An algorithm for selecting a good value for the parameter c in radial basis function interpolation. Adv. Comput. Math. 11, 193 (1999)10.1023/A:1018975909870 ↗
35. Fasshauer, G.E., Zhang, J.G.: On choosing optimal shape parameters for RBF approximation. Numer. Algorithms 45, 345 (2007)10.1007/s11075-007-9072-8 ↗