Influence of the Microstructure on Magnetic Stray Fields of Low-Carbon Steel Welds
Source abstract
Abstract
This study examines the relationship between the magnetic mesostructure with the microstructure of low carbon steel tungsten inert gas welds. Optical microscopy revealed variation in the microstructure of the parent material, in the heat affected and fusion zones, correlating with distinctive changes in the local magnetic stray fields measured with high spatial resolution giant magneto resistance sensors. In the vicinity of the heat affected zone high residual stresses were found using neutron diffraction. Notably, the gradients of von Mises stress and triaxial magnetic stray field modulus follow the same tendency transverse to the weld. In contrast, micro-X-ray fluorescence characterization indicated that local changes in element composition had no independent effect on magnetic stray fields.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Applications · Non-Destructive Testing Techniques · Electromagnetic Effects on Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Jiles, D.C.: Microstructure and stress dependence of the magnetic properties of steels. In: Review of Progress in Quantitative Nondestructive Evaluation, vol 9, pp. 1821–1827, Springer, Boston (1990). https://doi.org/10.1007/978-1-4684-5772-8_23410.1007/978-1-4684-5772-8_234 ↗
2. Liu, T., Kikuchi, H., Ara, K., Kamad, Y., Takahashi, S.: Magnetomechanical effect of low carbon steel studied by two kinds of magnetic minor hysteresis loops. NDT E Int. 39(5), 408–413 (2006). https://doi.org/10.1016/j.ndteint.2005.12.00110.1016/j.ndteint.2005.12.001 ↗
3. Seeger, A., Kronmüller, H., Rieger, H., Träuble, H.: Effect of lattice defects on the magnetization curve of ferromagnets. J. Appl. Phys 35(1964), 740–748 (1964). https://doi.org/10.1063/1.171346010.1063/1.1713460 ↗
4. Bozorth, R.M.: Ferromagnetism. Wiley-IEEE Press, Hoboken (2003)
5. Cullity, B.D.: Fundamentals of magnetostriction. JOM 23(1), 35–41 (1971). https://doi.org/10.1007/BF0335567710.1007/BF03355677 ↗
6. Becker, R.: Zur Theorie der Magnetisierungskurve. Zeitschrift für Phys. 62(3–4), 253–269 (1930). https://doi.org/10.1007/BF0133979710.1007/BF01339797 ↗
7. Joule, J.: XVII. On the effects of magnetism upon the dimensions of iron and steel bars. Philos. Mag. Ser. 3 30(199), 76–87 (1847). https://doi.org/10.1080/1478644470864565610.1080/14786444708645656 ↗
8. Villari, E.: Ueber die Aenderungen des magnetischen Moments, welche der Zug und das Hindurchleiten eines galvanischen Stroms in einem Stabe von Stahl oder Eisen hervorbringen. Ann. Phys. Chem. 202(9), 87–122 (1865). https://doi.org/10.1002/andp.1865202090610.1002/andp.18652020906 ↗
9. Jiles, D.C.: Theory of the magnetomechanical effect. J. Phys. D Appl. Phys. 28(8), 1537–1546 (1995). https://doi.org/10.1088/0022-3727/28/8/00110.1088/0022-3727/28/8/001 ↗
10. Polanschütz, W.: Inverse magnetostrictive effect and electromagnetic non-destructive testing methods. NDT Int. 19(4), 249–258 (1986). https://doi.org/10.1016/0308-9126(86)90071-410.1016/0308-9126(86)90071-4 ↗
11. Yamasaki, T., Yamamoto, S., Hirao, M.: Effect of applied stresses on magnetostriction of low carbon steel. NDT E Int. 29(5), 263–268 (1996). https://doi.org/10.1016/S0963-8695(96)00028-X10.1016/S0963-8695(96)00028-X ↗
12. Dorsey, H.G.: Magnetostriction in iron-carbon alloys. Phys. Rev. (Ser. I) 30(6), 698–719 (1910). https://doi.org/10.1103/PhysRevSeriesI.30.69810.1103/PhysRevSeriesI.30.698 ↗
13. Jiles, D.C.: The effect of compressive plastic deformation on the magnetic properties of AISI 4130 steels with various microstructures. J. Phys. D Appl. Phys. 21(7), 1196–1204 (1988). https://doi.org/10.1088/0022-3727/21/7/02310.1088/0022-3727/21/7/023 ↗
14. Bozorth, R.M., Williams, H.J.: Effect of small stresses on magnetic properties. Rev. Mod. Phys. (1945). https://doi.org/10.1103/RevModPhys.17.7210.1103/RevModPhys.17.72 ↗
15. Schneider, C.S.: Cooperative anistropic theory of ferromagnetic hysteresis. In: Caruta, B.M. (ed.) Trends in Materials Science Research, pp. 1–48. Nova Science Publishers, New York (2006). chap 1
16. Li, L., Jiles, D.C.: Modeling of the magnetomechanical effect: application of the Rayleigh law to the stress domain. J. Appl. Phys. 93(10), 8480–8482 (2003). https://doi.org/10.1063/1.154005910.1063/1.1540059 ↗
17. Hubert, A., Schäfer, R.: Magnetic Domains, 3rd edn. Springer, Berlin (1998). https://doi.org/10.1007/978-3-540-85054-010.1007/978-3-540-85054-0 ↗
18. Cullity, B.D., Graham, C.D.: Introduction to Magnetic Materials, 2nd edn. Wiley-IEEE Press, Hoboken, NJ (2009)
19. Bulte, D.P., Langman, R.A.: Origins of the magnetomechanical effect. J. Magn. Magn. Mater. 251(2), 229–243 (2002). https://doi.org/10.1016/S0304-8853(02)00588-710.1016/S0304-8853(02)00588-7 ↗
20. Coey, J.M.D.: Magnetism and Magnetic Materials. Cambridge University Press, Cambridge (2010)10.1017/CBO9780511845000 ↗
21. Sablik, M.J.: Modeling the effects of biaxial stress on magnetic properties of steels with application to biaxial stress NDE. Nondestruct. Test. Eval. 12(2), 87–102 (1995). https://doi.org/10.1080/1058975950895283710.1080/10589759508952837 ↗
22. Schneider, C.S., Cannell, P.Y., Watts, K.T.: Magnetoelasticity for large stresses. IEEE Trans. Magn. 28(5), 2626–2631 (1992). https://doi.org/10.1109/20.17957810.1109/20.179578 ↗
23. Spano, M.L., Hathaway, K.B., Savage, H.T.: Magnetostriction and magnetic anisotropy of field annealed Metglas* 2605 alloys via dc M-H loop measurements under stress. J. Appl. Phys. 53(3), 2667–2669 (1982). https://doi.org/10.1063/1.33093210.1063/1.330932 ↗
24. Langman, R.: Measurement of the mechanical stress in mild steel by means of rotation of magnetic field strength—part 2: biaxial stress. NDT Int. 15(2), 91–97 (1982). https://doi.org/10.1016/0308-9126(82)90003-710.1016/0308-9126(82)90003-7 ↗
25. Langman, R.: Magnetic properties of mild steel under conditions of biaxial stress. IEEE Trans. Magn. 26(4), 1246–1251 (1990). https://doi.org/10.1109/20.5401510.1109/20.54015 ↗
26. Buttle, D.J., Dalzell, W., Scruby, C.B., Langman, R.A.: Comparison of three magnetic techniques for biaxial stress measurement. In: Thompson, D.O., Chimenti, D.E. (eds.) Review of Progress in Quantitative Nondestructive Evaluation, pp. 1879–1885. Springer, Boston, MA (1990). https://doi.org/10.1007/978-1-4684-5772-8_24110.1007/978-1-4684-5772-8_241 ↗
27. Schneider, C.S., Richardson, J.M.: Biaxial magnetoelasticity in steels. J. Appl. Phys. 53(11), 8136–8138 (1982). https://doi.org/10.1063/1.33034110.1063/1.330341 ↗
28. Sablik, M.J., Riley, L.A., Burkhardt, G.L., Kwun, H., Cannell, P.Y., Watts, K.T., Langman, R.A.: Micromagnetic model for biaxial stress effects on magnetic properties. J. Magn. Magn. Mater. 132(1–3), 131–148 (1994). https://doi.org/10.1016/0304-8853(94)90307-710.1016/0304-8853(94)90307-7 ↗
29. von Mises, R.: Mechanik der festen Körper im plastisch-deformablen Zustand. Nachrichten von der Gesellschaft der Wissenschaften zu Göttigen, Math Klasse, pp. 582–592 (1913)
30. Craik, D.J., Wood, M.J.: Magnetization changes induced by stress in a constant applied field. J. Phys. D Appl. Phys. 3(7), 1009–1016 (1970). https://doi.org/10.1088/0022-3727/3/7/30310.1088/0022-3727/3/7/303 ↗
31. Makar, J.M., Tanner, B.K.: Effect of plastic deformation and residual stress on the permeability and magnetostriction of steels. J. Magn. Magn. Mater. 222, 291–304 (2000). https://doi.org/10.1016/S0304-8853(00)00558-810.1016/S0304-8853(00)00558-8 ↗
32. Schneider, C.S.: Effect of stress on the shape of ferromagnetic hysteresis loops. J. Appl. Phys. 97, 10E503 (2005). https://doi.org/10.1063/1.184645110.1063/1.1846451 ↗
33. Becker, R.: Elastische Spannungen und magnetische Eigenschaften. Phys. Zeitschrift 33(23), 905–913 (1932)
34. Kersten, M.: Zur magnetischen Analyse der inneren Spannungen. II. Zeitschrift für Phys. 82(11–12), 723–728 (1933). https://doi.org/10.1007/BF0133411910.1007/BF01334119 ↗
35. Kersten, M.: Zur magnetischen Analyse der inneren Spannungen. Zeitschrift für Phys. 76(7–8), 505–512 (1932). https://doi.org/10.1007/BF0133673210.1007/BF01336732 ↗
36. Perevertov, O., Schäfer, R.: Influence of applied compressive stress on the hysteresis curves and magnetic domain structure of grain-oriented transverse Fe-3Si steel. J. Phys. D Appl. Phys. 45(13), 135001 (2012). https://doi.org/10.1088/0022-3727/45/13/13500110.1088/0022-3727/45/13/135001 ↗
37. Perevertov, O., Schäfer, R.: Influence of applied tensile stress on the hysteresis curve and magnetic domain structure of grain-oriented Fe-3%Si steel. J. Phys. D Appl. Phys. 47(18), 185001 (2014). https://doi.org/10.1088/0022-3727/47/18/18500110.1088/0022-3727/47/18/185001 ↗
38. Perevertov, O.: Influence of the applied elastic tensile and compressive stress on the hysteresis curves of Fe-3%Si non-oriented steel. J. Magn. Magn. Mater. 428, 223–228 (2017). https://doi.org/10.1016/j.jmmm.2016.12.04010.1016/j.jmmm.2016.12.040 ↗
39. Weman, K.: Welding Processes Handbook, 2nd edn. Woodhead Publishing Limited, Cambridge (2011)10.1533/9780857095183 ↗
40. Theiner, W.A., Altpeter, I.: Determination of residual stresses using micromagnetic parameters. In: Höller, P. (ed.) New Procedures in Nondestructive Testing, pp. 575–585. Springer, Berlin (1983). https://doi.org/10.1007/978-3-662-02363-1_4910.1007/978-3-662-02363-1_49 ↗
41. ISO/TS 21432:2005 (2007) Non-destructive testing—standard test method for determining residual stresses by neutron diffraction
42. Lorentzen, T., Hutchings, M., Withers, P., Holden, T.: Introduction to the Characterization of Residual Stress by Neutron Diffraction. CRC Press, Boca Raton (2005). https://doi.org/10.1201/978020340281810.1201/9780203402818 ↗
43. Stegemann, R., Cabeza, S., Lyamkin, V., Bruno, G., Pittner, A., Wimpory, R., Boin, M., Kreutzbruck, M.: Residual stress characterization of steel TIG welds by neutron diffraction and by residual magnetic stray field mappings. J. Magn. Magn. Mater. 426(15), 580–587 (2017). https://doi.org/10.1016/j.jmmm.2016.11.10210.1016/j.jmmm.2016.11.102 ↗
44. DIN EN ISO 643:2012: Stahl- Mikrophotographische Bestimmung der erkennbaren Korngröße (2012)
45. DIN 50159-1: Metallische Werkstoffe - Härteprüfung nach dem UCI-Verfahren (2008)
46. Helmholtz-Zentrum Berlin für Materialien und Energie: E3: Residual stress neutron diffractometer at BER II. J. Large-Scale Res. Facil. (2016). https://doi.org/10.17815/jlsrf-2-12610.17815/jlsrf-2-126 ↗
47. Hughes, D.J., Hattingh, M.N.J.D.G., Webster, P.J.: The use of combs for evaluation of strain-free references for residual strain measurements by neutron and synchrotron X-ray diffraction. J. Neutron Res. 11(December), 289–293 (2003). https://doi.org/10.1080/1023816041000172676510.1080/10238160410001726765 ↗
48. Krawitz, A.D., Winholtz, R.A.: Use of position-dependent stress-free standards for diffraction stress measurements. Mater. Sci. Eng. A 185(1–2), 123–130 (1994). https://doi.org/10.1016/0921-5093(94)90935-010.1016/0921-5093(94)90935-0 ↗
49. Behnken, H., Hauk, V.: Berechnung der röntgenographischen Elastizitätskonstanten (REK) des Vielkristalls aus Einkristalldaten für beliebige Kristallsymmetrie. Zeitschrift für Met. 77, 620–626 (1986)
50. Pelkner, M., Neubauer, A., Reimund, V., Kreutzbruck, M., Schütze, A.: Routes for GMR-sensor design in non-destructive testing. Sensors 12, 12169–12183 (2012). https://doi.org/10.3390/s12091216910.3390/s120912169 ↗
51. Pelkner, M.: Entwicklung, Untersuchung und Anwendung von GMR-Sensorarrays für die Zerstörungsfreie Prüfung von ferromagnetischen Bauteilen. Dissertation, Universität des Saarlandes (2014)
52. Glenske, C., Loreit, U.: New 3D-magnetic field sensors with GMR-spin valve layers. In: 10th Symposium Magnetoresistive Sensors Magnetic Systems, pp. 79–86 (2009)
53. Laudien, U., Müller, M., Schulze, G., Teske, G.: DVS-Gefügerichtreihe Stahl. Deutscher Verlag für Schweisstechnik (DVS) GmbH, Düsseldorf (1979)
54. Gharibshahiyan, E., Raouf, A.H., Parvin, N., Rahimian, M.: The effect of microstructure on hardness and toughness of low carbon welded steel using inert gas welding. Mater. Des. 32(4), 2042–2048 (2011). https://doi.org/10.1016/j.matdes.2010.11.05610.1016/j.matdes.2010.11.056 ↗
55. Pang, W., Ahmed, N., Dunne, D.: Hardness and microstructural gradients in the heat affected zone of welded low-carbon quenched and tempered steels. Aust. Weld. J. 56(2), 36–48 (2011)
56. Bhole, S.D., Nemade, J.B., Collins, L., Liu, C.: Effect of nickel and molybdenum additions on weld metal toughness in a submerged arc welded HSLA line-pipe steel. J. Mater. Process. Technol. 173(1), 92–100 (2006). https://doi.org/10.1016/j.jmatprotec.2005.10.02810.1016/j.jmatprotec.2005.10.028 ↗
57. Macherauch, E.: Introduction To Residual Stress. In: Niku-Lari, A. (ed.) Residual Stress, pp. 1–36. Pergamon Books Ltd, Oxford (1987). https://doi.org/10.1016/B978-0-08-034062-3.50011-210.1016/B978-0-08-034062-3.50011-2 ↗
58. Thompson, S.M., Allen, P.J., Tanner, B.K.: Magnetic properties of welds in high-strength pearlitic steels. IEEE Trans. Magn. 26(5), 1984–1986 (1990). https://doi.org/10.1109/20.10459110.1109/20.104591 ↗
59. DIN EN ISO 18265:2013: Metallic materials—conversion of hardness values (2014)
60. Hodgson, P., Hickson, M., Gibbs, R.: The production and mechanical properties of ultrafine ferrite. Mater. Sci. Forum 284–286, 63–72 (1998). https://doi.org/10.4028/www.scientific.net/MSF.284-286.6310.4028/www.scientific.net/MSF.284-286.63 ↗
61. Wellinger, K., Eichhorn, F., Gimmel, P.: Schweissen. Alfred Kröner Verlag, Stuttgart (1964)
62. Bruno, G.: Relaxation of residual stress in AISI 347 welded pipe: a time-of-flight neutron diffraction study. Zeitschrift für Met. 93(1), 33–41 (2002). https://doi.org/10.3139/146.02003310.3139/146.020033 ↗
63. Stegemann, R., Cabeza, S., Pelkner, M., Lyamkin, V., Sonntag, N., Bruno, G., Skrotzki, B., Kreutzbruck, M.: Evaluation of high spatial resolution imaging of magnetic stray fields for early damage detection. In: Bond, L.J., Chimenti, D.E. (eds.) AIP Conference Proceedings, AIP Publishing, Melville, NY, USA, vol 1806, pp. 110010–1–110010–10 (2017). https://doi.org/10.1063/1.497468810.1063/1.4974688 ↗
64. Spooner, S.: Neutron residual stress measurement in welds, chap 18. In: Fitzpatrick, M.E., Lodini, A. (eds.) Analysis of Residual Stress by Diffraction Using Neutron Synchrotron Radiation, pp. 296–318. Taylor a Francis, London (2003)10.1201/9780203608999.ch18 ↗
65. Winholtz, R.A., Krawitz, A.D.: The effect of assuming the principal directions in neutron diffraction measurement of stress tensors. Mater. Sci. Eng. A 205(1–2), 257–258 (1996a). https://doi.org/10.1016/0921-5093(95)10040-710.1016/0921-5093(95)10040-7 ↗
66. Winholtz, R.A., Krawitz, A.D.: Implications of equilibrium on principal macrostresses measured by neutron diffraction. Mater. Sci. Eng. A 221(1–2), 33–37 (1996b). https://doi.org/10.1016/S0921-5093(96)10481-010.1016/S0921-5093(96)10481-0 ↗
67. Krawitz, A.D., Winholtz, R.A., Weisbrook, C.M.: Relation of elastic strain distributions determined by diffraction to corresponding stress distributions. Mater. Sci. Eng. A 206(2), 176–182 (1996). https://doi.org/10.1016/0921-5093(95)10018-010.1016/0921-5093(95)10018-0 ↗
68. Hauk, V.: Structural and Residual Stress Analysis by Nondestructive Methods. Elsevier Science B.V, Amsterdam (1997)
69. Perevertov, O.: Influence of the residual stress on the magnetization process in mild steel. J. Phys. D Appl. Phys. 40, 949–954 (2007). https://doi.org/10.1088/0022-3727/40/4/00410.1088/0022-3727/40/4/004 ↗
70. Takahashi, S., Kobayashi, S., Kikuchi, H., Kamada, Y.: Relationship between mechanical and magnetic properties in cold rolled low carbon steel. J. Appl. Phys. (2006). https://doi.org/10.1063/1.240104810.1063/1.2401048 ↗
71. Tanner, B.K., Szpunar, J.A., Willcock, S.N.M., Morgan, L.L., Mundell, P.A.: Magnetic and metallurgical properties of high-tensile steels. J. Mater. Sci. 23(12), 4534–4540 (1988). https://doi.org/10.1007/BF0055195610.1007/BF00551956 ↗
72. Sablik, M.J., Jiles, D.C.: Coupled magnetoelastic theory of magnetic and magnetostrictive hysteresis. IEEE Trans. Magn. 29(4), 2113–2123 (1993). https://doi.org/10.1109/20.22103610.1109/20.221036 ↗
73. Kvasnica, B., Fabo, P.: Highly precise non-contact instrumentation for magnetic measurement of mechanical stress in low-carbon steel wires. Meas. Sci. Technol. 7, 763–767 (1996). https://doi.org/10.1088/0957-0233/7/5/00710.1088/0957-0233/7/5/007 ↗
74. Hinz, G., Voigth, H.: Magnetic Sensors, Sensors, A Comprehensive Survey, vol 5, VCH Verlagsgesellschaft mbH, Weinheim, chap Magnetoelastic Sensors, pp. 97–152 (2008) https://doi.org/10.1002/9783527620166.ch410.1002/9783527620166.ch4 ↗
75. Cullity, B.D.: Magnetic Methods. In: Proceedings a Work. Nondestructive Evaluation Resdiual Stress, pp. 227–236. NTIAC-76-2, San Antonio, TX (2017)
76. DIN EN ISO 8249:2000: Welding—Determination of Ferrite Number (FN) in Austenitic and Duplex Ferritic-Austenitic Cr-Ni Stainless Steel Weld Metals (2000)