Applications of Thermoelectric Power Measurement to Deterioration Diagnosis of Nuclear Material and Its Principle

In order to non-destructively evaluate changes in toughness of cast duplex stainless steel, which is frequently used in main coolant pipes of PWR type nuclear power plants, due to thermal aging, we tried to apply thermoelectric power (TEP) measurement. because TEP is sensitive to microstructural material changes, and to clarify the mechanism behind TEP changes due to thermal aging. As a result, TEP of cast duplex stainless steel increased with aging time, and good correlations were found between TEP and toughness. Concerning the mechanism, TEP of high and low Cr content alloys was higher than that of intermediate Cr content alloys. Because high and low Cr areas are created in the ferrite phase due to thermal aging. TEP of the entire material increased. Furthermore, when each Cr fluctuating area acted in parallel, the increase in TEP became larger. According to the Mott-Jones theory, TEP is largely related to the electron density of states at the Fermi level. The electron density of states of Fe–Cr–Ni alloys in the valence band was measured with X-ray photoelectron spectroscopy (XPS). As a result, there was a high correlation between the TEP calculated from the XPS spectrum and the measured TEP. Therefore, we showed experimentally that the electron density of states changed due to variations in Cr concentration, which also affect TEP.