Stacked Inexact Augmented Lagrangian Multiplier with Sparse and Low-Rank Matrix Decomposition: A Novel Low Sampling Vibration Signal Denoising Strategy for Enhancing Feature Quality to Predict Health State of Bearings Using Machine Learning Model

1. Singh, A., Grant, B., Defour, R., Sharma, C., Bahadoorsingh, S.: A review of induction motor fault modeling. Electr. Power. Syst. Res. 133, 191–197 (2016). https://doi.org/10.1016/j.epsr.2015.12.01710.1016/j.epsr.2015.12.017 ↗

2. Dash, R.N., Sahu, S., Panigrahi, C.K., Subudhi, B.: Condition monitoring of induction motors: - A review. International Conference on Signal Processing, Communication, Power and Embedded System, SCOPES 2016 - Proceedings. 1, 2006–2011 (2017). https://doi.org/10.1109/SCOPES.2016.795580010.1109/SCOPES.2016.7955800 ↗

3. Hakim, M., Omran, A.A.B., Ahmed, A.N., Al-Waily, M., Abdellatif, A.: A systematic review of rolling bearing fault diagnoses based on deep learning and transfer learning: taxonomy, overview, application, open challenges, weaknesses and recommendations. Ain. Shams. Eng. J. 14, 101945 (2023). https://doi.org/10.1016/j.asej.2022.10194510.1016/j.asej.2022.101945 ↗

4. Ciprian, H.ŞC., Loránd, S.: Bearing faults condition monitoring – a literature survey. J. Comput. Sci. Control. Syst. 5, 19–23 (2012)

5. Liu, B., Riemenschneider, S., Xu, Y.: Gearbox fault diagnosis using empirical mode decomposition and Hilbert spectrum. Mech. Syst. Signal. Process. 20, 718–734 (2006). https://doi.org/10.1016/j.ymssp.2005.02.00310.1016/j.ymssp.2005.02.003 ↗

6. Fuentes, R., Dwyer-Joyce, R.S., Marshall, M.B., Wheals, J., Cross, E.J.: Detection of sub-surface damage in wind turbine bearings using acoustic emissions and probabilistic modelling. Renew. Energy. 147, 776–797 (2020). https://doi.org/10.1016/j.renene.2019.08.01910.1016/j.renene.2019.08.019 ↗

7. Rai, A., Upadhyay, S.H.: A review on signal processing techniques utilized in the fault diagnosis of rolling element bearings. Tribol. Int. 96, 289–306 (2016). https://doi.org/10.1016/j.triboint.2015.12.03710.1016/j.triboint.2015.12.037 ↗

8. Al-Ghamdi, K., Taylan, O.: A comparative study on modelling material removal rate by ANFIS and polynomial methods in electrical discharge machining process. Comput. Ind. Eng. 79, 27–41 (2015). https://doi.org/10.1016/j.cie.2014.10.02310.1016/j.cie.2014.10.023 ↗

9. Al-Dossary, S., Hamzah, R.I.R., Mba, D.: Observations of changes in acoustic emission waveform for varying seeded defect sizes in a rolling element bearing. Appl. Acoust. 70, 58–81 (2009). https://doi.org/10.1016/j.apacoust.2008.01.00510.1016/j.apacoust.2008.01.005 ↗

10. Kim, B.S., Gu, D.S., Kim, J.G., Kim, Y.C., Choi, B.K.: Rolinig element bearing fault detection using acoustic emission signal analyzed by envelope analysis with discrete wavelet transform. Engineering Asset Lifecycle Management - Proceedings of the 4th World Congress on Engineering Asset Management, WCEAM 2009. 596–602 (2009). https://doi.org/10.1007/978-0-85729-320-6_6910.1007/978-0-85729-320-6_69 ↗

11. Pandya, D.H., Upadhyay, S.H., Harsha, S.P.: Fault diagnosis of rolling element bearing with intrinsic mode function of acoustic emission data using APF-KNN. Expert. Syst. Appl. 40, 4137–4145 (2013). https://doi.org/10.1016/j.eswa.2013.01.03310.1016/j.eswa.2013.01.033 ↗

12. Ferrando Chacon, J.L., Kappatos, V., Balachandran, W., Gan, T.H.: A novel approach for incipient defect detection in rolling bearings using acoustic emission technique. Appl. Acoust. 89, 88–100 (2015). https://doi.org/10.1016/j.apacoust.2014.09.00210.1016/j.apacoust.2014.09.002 ↗

13. Hernandez-Solis, A., Carlsson, F.: Diagnosis of submersible centrifugal pumps: a motor current and power signature approaches. EPE J. 20, 58–64 (2010). https://doi.org/10.1080/09398368.2010.1146374910.1080/09398368.2010.11463749 ↗

14. Mohanty, A.R., Pradhan, P.K., Mahalik, N.P., Dastidar, S.G.: Fault detection in a centrifugal pump using vibration and motor current signature analysis. Int. J. Autom. Control. 6, 261–276 (2012)10.1504/IJAAC.2012.051884 ↗

15. Peng, Z., Kessissoglou, N.: An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis. Wear 255, 1221–1232 (2003). https://doi.org/10.1016/S0043-1648(03)00098-X10.1016/S0043-1648(03)00098-X ↗

16. Jantunen, E.: How to diagnose the wear of rolling element bearings based on indirect condition monitoring methods. Int. J. COMADEM. 9, 24–38 (2006)

17. Hu, C., Wang, Y.: Multidimensional denoising of rotating machine based on tensor factorization. Mech. Syst. Signal. Process. 122, 273–289 (2019). https://doi.org/10.1016/j.ymssp.2018.12.01210.1016/j.ymssp.2018.12.012 ↗

18. Wang, Y., He, Z., Zi, Y.: Enhancement of signal denoising and multiple fault signatures detecting in rotating machinery using dual-tree complex wavelet transform. Mech. Syst. Signal. Process. 24, 119–137 (2010). https://doi.org/10.1016/j.ymssp.2009.06.01510.1016/j.ymssp.2009.06.015 ↗

19. Zhao, M., Jia, X.: A novel strategy for signal denoising using reweighted SVD and its applications to weak fault feature enhancement of rotating machinery. Mech. Syst. Signal. Process. 94, 129–147 (2017). https://doi.org/10.1016/j.ymssp.2017.02.03610.1016/j.ymssp.2017.02.036 ↗

20. Guan, T., Liu, S., Xu, W., Li, Z., Huang, H., Wang, Q.: Rolling Bearing Fault Diagnosis Based on Component Screening Vector Local Characteristic-Scale Decomposition. Shock and Vibration. 2022, (2022). https://doi.org/10.1155/2022/992568110.1155/2022/9925681 ↗

21. Alshorman, O., Irfan, M., Saad, N., Zhen, D., Haider, N., Glowacz, A., Alshorman, A.: A Review of Artificial Intelligence Methods for Condition Monitoring and Fault Diagnosis of Rolling Element Bearings for Induction Motor. Shock and Vibration. 2020, (2020). https://doi.org/10.1155/2020/884375910.1155/2020/8843759 ↗

22. Mongia, C., Goyal, D., Sehgal, S.: Vibration response-based condition monitoring and fault diagnosis of rotary machinery. Mater. Today. Proc. 50, 679–683 (2021). https://doi.org/10.1016/j.matpr.2021.04.39510.1016/j.matpr.2021.04.395 ↗

23. Qin, Y., Yang, R., He, B., Chen, D., Mao, Y.: Multi-layer convolutional dictionary learning network for signal denoising and its application to explainable rolling bearing fault diagnosis. ISA Trans. 147, 55–70 (2024). https://doi.org/10.1016/j.isatra.2024.01.02710.1016/j.isatra.2024.01.027 ↗

24. Dong, H., Liu, S., Liu, D., Tao, Z., Fang, L., Pang, L., Zhang, Z.: Enhanced infrasound denoising for debris flow analysis: Integrating empirical mode decomposition with an improved wavelet threshold algorithm. Measurement (Lond). 235, (2024). https://doi.org/10.1016/j.measurement.2024.11496110.1016/j.measurement.2024.114961 ↗

25. Shamaee, Z., Mivehchy, M.: Dominant noise-aided EMD (DEMD): Extending empirical mode decomposition for noise reduction by incorporating dominant noise and deep classification. Biomed Signal Process Control. 80, (2023). https://doi.org/10.1016/j.bspc.2022.10421810.1016/j.bspc.2022.104218 ↗

26. Deng, L., Wang, X.: PSO-optimized SSLMS adaptive filter for signal denoising of rolling bearings under small sample condition. Meas Sci Technol. 35, (2024). https://doi.org/10.1088/1361-6501/ad4dc510.1088/1361-6501/ad4dc5 ↗

27. Wang, J., Li, H., Liu, X., Sun, B., Liu, Y.: Bearing fault diagnosis method using CNN with denoising structure under strong noise background. Meas Sci Technol. 36, (2025). https://doi.org/10.1088/1361-6501/adaa0a10.1088/1361-6501/adaa0a ↗

28. Lu, H., Zhou, K., He, L.: Bearing Fault Vibration Signal Denoising Based on Adaptive Denoising Autoencoder. Electronics (Switzerland). 13, (2024). https://doi.org/10.3390/electronics1312240310.3390/electronics13122403 ↗

29. Dhandapani, R., Mitiche, I., McMeekin, S., Mallela, V.S., Morison, G.: Enhanced partial discharge signal denoising using dispersion entropy optimized variational mode decomposition. Entropy. 23, (2021). https://doi.org/10.3390/e2312156710.3390/e23121567 ↗

30. Bentaleb, D., Khatar, Z.: Multi-criteria Bayesian optimization of Empirical Mode Decomposition and hybrid filters fusion for enhanced ECG signal denoising and classification: Cardiac arrhythmia and myocardial infarction cases. Comput Biol Med. 184, (2025). https://doi.org/10.1016/j.compbiomed.2024.10946210.1016/j.compbiomed.2024.109462 ↗

31. Suganthi Brindha, G., Manjula, J.: Empirical Mode Decomposition (EMD) Based Denoising Method for Heart Sound Signal and its Performance Analysis. In: 2024 1st International Conference on Cognitive, Green and Ubiquitous Computing (IC-CGU), pp. 01–05. (2024). https://doi.org/10.1109/ic-cgu58078.2024.1053070310.1109/ic-cgu58078.2024.10530703 ↗

32. Zhang, Y., Yang, Z., Du, X., Luo, X.: A new method for denoising underwater acoustic signals based on EEMD, correlation coefficient, permutation entropy, and wavelet threshold denoising. J. Mar. Sci. Appl. 23, 222–237 (2024). https://doi.org/10.1007/s11804-024-00386-610.1007/s11804-024-00386-6 ↗

33. Li, X., Ni, R., Ji, Z.: ICG signal denoising based on ICEEMDAN and PSO-VMD methods. Phys. Eng. Sci. Med. (2024). https://doi.org/10.1007/s13246-024-01467-010.1007/s13246-024-01467-0 ↗

34. Li, J., Wang, Z., Li, Q., Zhang, J.: An enhanced K-SVD denoising algorithm based on adaptive soft-threshold shrinkage for fault detection of wind turbine rolling bearing. ISA Trans. 142, 454–464 (2023). https://doi.org/10.1016/j.isatra.2023.07.04210.1016/j.isatra.2023.07.042 ↗

35. Zhao, S., Ma, L., Xu, L., Liu, M., Chen, X.: A Study of Fault Signal Noise Reduction Based on Improved CEEMDAN-SVD. Applied Sciences (Switzerland). 13, (2023). https://doi.org/10.3390/app13191071310.3390/app131910713 ↗

36. Li, G., Bu, W., Yang, H.: Noise reduction method for ship radiated noise signal based on modified uniform phase empirical mode decomposition. Measurement (Lond). 227, (2024). https://doi.org/10.1016/j.measurement.2024.11419310.1016/j.measurement.2024.114193 ↗

37. Calvo, M.S., Lee, H.S.: Enhanced complete ensemble EMD with superior noise handling capabilities: a robust signal decomposition method for power systems analysis. Eng. Rep. (2024). https://doi.org/10.1002/eng2.1286210.1002/eng2.12862 ↗

38. Zhong, T., Qin, C.J., Shi, G., Zhang, Z.N., Tao, J.F., Liu, C.L.: A residual denoising and multiscale attention-based weighted domain adaptation network for tunnel boring machine main bearing fault diagnosis. Sci China. Technol. Sci. 67, 2594–2618 (2024). https://doi.org/10.1007/s11431-024-2734-x10.1007/s11431-024-2734-x ↗

39. Wang, H., Yao, Y., Zhang, G., Pan, J., Gao, L., Jin, H., Wang, C.: Enhanced Noise Suppression in Partial Discharge Signals via SVD and VMD with Wavelet Thresholding. Modelling and Simulation in Engineering. 2024, (2024). https://doi.org/10.1155/2024/567698610.1155/2024/5676986 ↗

40. Zhong, J., Liu, Z., Bi, X.: Partial Discharge Signal Denoising Algorithm Based on Aquila Optimizer–Variational Mode Decomposition and K-Singular Value Decomposition. Applied Sciences (Switzerland). 14, (2024). https://doi.org/10.3390/app1407275510.3390/app14072755 ↗

41. Yang, X., Wang, W.: Chaotic signal denoising based on energy selection TQWT and adaptive SVD. Sci Rep. 13, (2023). https://doi.org/10.1038/s41598-023-45811-y10.1038/s41598-023-45811-y ↗

42. Tang, H.H., Cheng, S.J., Li, W.Q., Mao, W.J.: An EDCC-EMD analysis-based network for DAS VSP data denoising in frequency domain. Pet Sci. (2025). https://doi.org/10.1016/j.petsci.2025.03.00610.1016/j.petsci.2025.03.006 ↗

43. Chen, C., Luo, Y., Liu, J., Yi, Y., Zeng, W., Wang, S., Yao, G.: Joint sound denoising with EEMD and improved wavelet threshold for real-time drilling lithology identification. Measurement (Lond). 238, (2024). https://doi.org/10.1016/j.measurement.2024.11536310.1016/j.measurement.2024.115363 ↗

44. Ji, S., Yan, J., Liu, Y., He, G.: ICEEMDAN–VMD denoising method for enhanced magnetic memory detection signal of micro-defects. Frontiers in Signal Processing. 5, (2025). https://doi.org/10.3389/frsip.2025.151855810.3389/frsip.2025.1518558 ↗

45. Hou, Y., Wu, P., Wu, D.: A periodic-modulation-oriented noise resistant correlation method for industrial fault diagnostics of rotating machinery under the circumstances of limited system signal availability. ISA Trans. 151, 258–284 (2024). https://doi.org/10.1016/j.isatra.2024.05.05110.1016/j.isatra.2024.05.051 ↗

46. Cheng, Y., Chen, B., Zhang, W.: Adaptive Multipoint Optimal Minimum Entropy Deconvolution Adjusted and Application to Fault Diagnosis of Rolling Element Bearings. IEEE Sens. J. 19, 12153–12164 (2019). https://doi.org/10.1109/JSEN.2019.293714010.1109/JSEN.2019.2937140 ↗

47. Hou, Y., Wang, Y., Xiang, T., Xie, J., Zhao, J., He, W., Huang, W., Wu, D.: An Efficient Deconvolution Method for Automatic Detection of Bearing Localized Defect Based on Bayesian Optimization. IEEE Trans. Instrum. Meas. 73, 1–15 (2024). https://doi.org/10.1109/TIM.2024.337826010.1109/TIM.2024.3378260 ↗

48. Pan, H., Yang, Y., Zheng, J., Cheng, J.: A noise reduction method of symplectic singular mode decomposition based on Lagrange multiplier. Mech. Syst. Signal Process. 133, 106283 (2019). https://doi.org/10.1016/j.ymssp.2019.10628310.1016/j.ymssp.2019.106283 ↗

49. Salih, S.: Fourier Transform - Signal Processing. University of Anbar, IntechOpen, Iraq. (2012). https://doi.org/10.5772/81310.5772/813 ↗

50. Jenkins, W.K.: Fourier series, Fourier transforms and the DFT, pp. 83–111. CRC Press eBooks. (2022). https://doi.org/10.1201/9781315214023-410.1201/9781315214023-4 ↗

51. Thirukovalluru, R., Dixit, S., Sevakula, R.K., Verma, N.K., Salour, A.: Generating feature sets for fault diagnosis using denoising stacked auto-encoder. 2016 IEEE International Conference on Prognostics and Health Management, ICPHM 2016. 1–7 (2016). https://doi.org/10.1109/ICPHM.2016.754286510.1109/ICPHM.2016.7542865 ↗

52. Sriram, S., Nitin, S., Prabhu, K.M.M., Bastiaans, M.J.: Signal denoising techniques for partial discharge measurements. IEEE Trans. Dielectr. Electr. Insul. 12, 1182–1191 (2005). https://doi.org/10.1109/TDEI.2005.156179810.1109/TDEI.2005.1561798 ↗

53. Yusoff, N.A., Isa, M., Hamid, H., Adzman, M.R., Rohani, M.N.K.H., Yii, C.C., Ayop, N.N.: Denoising technique for partial discharge signal : AAA comparison performance between artificial neural network, fast fourier transform and discrete wavelet transform. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding. 311–316 (2017). https://doi.org/10.1109/PECON.2016.795157910.1109/PECON.2016.7951579 ↗

54. Khayam, U., Surandaka, Y.A.: Design, implementation, and testing of partial discharge signal processing system. 2016 2nd International Conference of Industrial, Mechanical, Electrical, and Chemical Engineering, ICIMECE 2016. 175–179 (2017). https://doi.org/10.1109/ICIMECE.2016.791044810.1109/ICIMECE.2016.7910448 ↗

55. de Mota, H.O., da Rocha, L.C.D., de Salles, T.C.M., Vasconcelos, F.H.: Partial discharge signal denoising with spatially adaptive wavelet thresholding and support vector machines. Electric. Power. Syst. Res. 81, 644–659 (2011). https://doi.org/10.1016/j.epsr.2010.10.03010.1016/j.epsr.2010.10.030 ↗

56. Chen, J., Pan, J., Li, Z., Zi, Y., Chen, X.: Generator bearing fault diagnosis for wind turbine via empirical wavelet transform using measured vibration signals. Renew. Energy. 89, 80–92 (2016). https://doi.org/10.1016/j.renene.2015.12.01010.1016/j.renene.2015.12.010 ↗

57. Shi, F.: A review of noise removal techniques in ECG signals. 2022 IEEE Conference on Telecommunications, Optics and Computer Science (TOCS). 237–240 (2023). https://doi.org/10.1109/tocs56154.2022.1001598210.1109/tocs56154.2022.10015982 ↗

58. Das, B., Pal, S., Bag, S.: Weld quality prediction in friction stir welding using wavelet analysis. Int. J. Adv. Manuf. Technol. 89, 711–725 (2017). https://doi.org/10.1007/s00170-016-9140-010.1007/s00170-016-9140-0 ↗

59. Pal, S., Pal, S.K., Samantaray, A.K.: Neurowavelet packet analysis based on current signature for weld joint strength prediction in pulsed metal inert gas welding process. Sci. Technol. Weld. Joining 13, 638–645 (2008). https://doi.org/10.1179/174329308X29998610.1179/174329308X299986 ↗

60. Cao, H., Chen, X., Zi, Y., Ding, F., Chen, H., Tan, J., He, Z.: End milling tool breakage detection using lifting scheme and Mahalanobis distance. Int. J. Mach. Tools. Manuf. 48, 141–151 (2008). https://doi.org/10.1016/j.ijmachtools.2007.09.00110.1016/j.ijmachtools.2007.09.001 ↗

61. Chatterjee, S., Thakur, R.S., Yadav, R.N., Gupta, L., Raghuvanshi, D.K.: Review of noise removal techniques in ECG signals. IET Signal. Proc. 14, 569–590 (2020). https://doi.org/10.1049/iet-spr.2020.010410.1049/iet-spr.2020.0104 ↗

62. Guo, T., Zhang, T., Lim, E., Lopez-Benitez, M., Ma, F., Yu, L.: A review of wavelet analysis and its applications: challenges and opportunities. IEEE Access. 10, 58869–58903 (2022). https://doi.org/10.1109/ACCESS.2022.317951710.1109/ACCESS.2022.3179517 ↗

63. Mojahed, A., Bergman, L.A., Vakakis, A.F.: New inverse wavelet transform method with broad application in dynamics. Mech. Syst. Signal Process. 156, 107691 (2021). https://doi.org/10.1016/j.ymssp.2021.10769110.1016/j.ymssp.2021.107691 ↗

64. Dutta, S., Pal, S.K., Mukhopadhyay, S., Sen, R.: Application of digital image processing in tool condition monitoring: a review. CIRP J. Manuf. Sci. Technol. 6, 212–232 (2013). https://doi.org/10.1016/j.cirpj.2013.02.00510.1016/j.cirpj.2013.02.005 ↗

65. Zheng, J., Pan, H., Yang, S., Cheng, J.: Adaptive parameterless empirical wavelet transform based time-frequency analysis method and its application to rotor rubbing fault diagnosis. Signal. Process. 130, 305–314 (2017). https://doi.org/10.1016/j.sigpro.2016.07.02310.1016/j.sigpro.2016.07.023 ↗

66. Lei, Y., Lin, J., He, Z., Zuo, M.J.: A review on empirical mode decomposition in fault diagnosis of rotating machinery. Mech. Syst. Signal. Process. 35, 108–126 (2013). https://doi.org/10.1016/j.ymssp.2012.09.01510.1016/j.ymssp.2012.09.015 ↗

67. Xu, D., Xu, Y., Chen, X., Zha, W., Li, X.: Life cycle vibration analysis based on EMD of rolling element bearing under ALT by constant stress. In: 2009 8th International Conference on Reliability, Maintainability and Safety. pp. 1177–1182. IEEE (2009)10.1109/ICRMS.2009.5270070 ↗

68. Chen, Q., Huang, N., Riemenschneider, S., Xu, Y.: A B-spline approach for empirical mode decompositions. Adv. Comput. Math. 24(1–4), 171–195 (2006). https://doi.org/10.1007/s10444-004-7614-310.1007/s10444-004-7614-3 ↗

69. Peel, M.C., Mcmahon, T.A., Pegram, G.G.S.: Assessing the performance of rational spline-based empirical mode decomposition using a global annual precipitation dataset. Proc. Royal. Soc. A: Math, Phys. Eng. Sci. 465, 1919–1937 (2009). https://doi.org/10.1098/rspa.2008.035210.1098/rspa.2008.0352 ↗

70. Li, G., Hu, Y.: An enhanced PCA-based chiller sensor fault detection method using ensemble empirical mode decomposition based denoising. Energy. Build. 183, 311–324 (2019). https://doi.org/10.1016/j.enbuild.2018.10.01310.1016/j.enbuild.2018.10.013 ↗

71. Mao, Q., Fang, X., Hu, Y., Li, G.: Chiller sensor fault detection based on empirical mode decomposition threshold denoising and principal component analysis. Appl. Therm. Eng. 144, 21–30 (2018). https://doi.org/10.1016/j.applthermaleng.2018.07.10410.1016/j.applthermaleng.2018.07.104 ↗

72. Li, Y., Xu, M., Wei, Y., Huang, W.: Rotating machine fault diagnosis based on intrinsic characteristic-scale decomposition. Mech. Mach. Theory. 94, 9–27 (2015). https://doi.org/10.1016/j.mechmachtheory.2015.08.00110.1016/j.mechmachtheory.2015.08.001 ↗

73. Zheng, J., Cheng, J., Yang, Y.: Partly ensemble local characteristic-scale decomposition: a new noise assisted data analysis method. Acta. Electonica. Sinica. 41, 1030 (2013)

74. Zheng, J., Cheng, J., Nie, Y.: Complete ensemble local characteristic-scale decomposition and its applications to rotor fault diagnosis. J. Vib. Eng. 27, 637–646 (2014)

75. Liu, H., Wang, X., Lu, C.: Rolling bearing fault diagnosis based on LCD-TEO and multifractal detrended fluctuation analysis. Mech. Syst. Signal. Process. 60, 273–288 (2015). https://doi.org/10.1016/j.ymssp.2015.02.00210.1016/j.ymssp.2015.02.002 ↗

76. Mengdi, S., Jun, J., Yu, B., Tao, C.: The design of fault diagnosis system of equipment operating status based on ITD and LCD. Proceedings - 2021 2nd International Conference on Electronics, Communications and Information Technology, CECIT 2021. 1208–1212 (2021). https://doi.org/10.1109/CECIT53797.2021.0021410.1109/CECIT53797.2021.00214 ↗

77. Zhou, G., Li, H., Huang, T., Li, S.: A novel signal denoising method using an analytical signal-based SVD and its applications in bearing fault diagnosis. IEEE Sens. J. 24, 26171–26180 (2024). https://doi.org/10.1109/JSEN.2024.342335310.1109/JSEN.2024.3423353 ↗

78. Kaur, C., Bisht, A., Singh, P., Joshi, G.: EEG Signal denoising using hybrid approach of Variational Mode Decomposition and wavelets for depression. Biomed Signal Process Control. 65, (2021). https://doi.org/10.1016/j.bspc.2020.10233710.1016/j.bspc.2020.102337 ↗

79. Li, J., Luo, W., Bai, M.: Review of research on signal decomposition and fault diagnosis of rolling bearing based on vibration signal, (2024)10.1088/1361-6501/ad4eff ↗

80. Zhou, Yixin, Ma, Zepeng, Lei, Fu.: A review of key signal processing techniques for structural health monitoring: Highlighting non-parametric time-frequency analysis, adaptive decomposition, and deconvolution. Algorithms 18(6), 318 (2025). https://doi.org/10.3390/a1806031810.3390/a18060318 ↗

81. Lei, Z., Wang, F., Li, C.: A denoising method of partial discharge signal based on improved SVD-VMD. IEEE Trans. Dielectr. Electr. Insul. 30, 2107–2116 (2023). https://doi.org/10.1109/TDEI.2023.326972510.1109/TDEI.2023.3269725 ↗

82. Liu, H., Wang, Z., Zhao, C., Ge, J., Dong, H., Liu, Z.: Improving the signal-to-noise-ratio of free induction decay signals using a new multilinear singular value decomposition-based filter. IEEE Trans Instrum Meas. 70, (2021). https://doi.org/10.1109/TIM.2021.310523610.1109/TIM.2021.3105236 ↗

83. Ma, Y., Cheng, J.: A novel joint denoising method for gear fault diagnosis with improved quaternion singular value decomposition. Measurement (Lond). 226, (2024). https://doi.org/10.1016/j.measurement.2024.11416510.1016/j.measurement.2024.114165 ↗

84. Chen, Y., Liang, X., Zuo, M.J.: An improved singular value decomposition-based method for gear tooth crack detection and severity assessment. J Sound Vib. 468, (2020). https://doi.org/10.1016/j.jsv.2019.11506810.1016/j.jsv.2019.115068 ↗

85. Cheng, X., Mao, J., Li, J., Zhao, H., Zhou, C., Gong, X., Rao, Z.: An EEMD-SVD-LWT algorithm for denoising a lidar signal. Measurement (Lond). 168, (2021). https://doi.org/10.1016/j.measurement.2020.10840510.1016/j.measurement.2020.108405 ↗

86. Wang, B., Ding, C.: An adaptive signal denoising method based on reweighted SVD for the fault diagnosis of rolling bearings. Sensors. 25, (2025). https://doi.org/10.3390/s2508247010.3390/s25082470 ↗

87. Yu, T., Li, C., Huang, J., Xiao, X., Zhang, X., Li, Y., Fu, B.: ReF-DDPM: A novel DDPM-based data augmentation method for imbalanced rolling bearing fault diagnosis. Reliab Eng Syst Saf. 251, (2024). https://doi.org/10.1016/j.ress.2024.11034310.1016/j.ress.2024.110343 ↗

88. Padhy, S., Sharma, L.N., Dandapat, S.: Multilead ECG data compression using SVD in multiresolution domain. Biomed. Signal. Process. Control. 23, 10–18 (2016)10.1016/j.bspc.2015.06.012 ↗

89. Li, H., Liu, T., Wu, X., Chen, Q.: A bearing fault diagnosis method based on enhanced singular value decomposition. IEEE Trans. Industr. Inform. 17, 3220–3230 (2021). https://doi.org/10.1109/TII.2020.300137610.1109/TII.2020.3001376 ↗

90. Liu, L., Wang, K., Jiang, T., Luo, S., Xu, S.: Research on off-axis integrated cavity output spectrum signal denoising based on CSGWO-SVMD-SVD method. Opt. Express. 32, 33698 (2024). https://doi.org/10.1364/oe.53742710.1364/oe.537427 ↗

91. Zhao, X., Ye, B.: Feature frequency extraction algorithm based on the singular value decomposition with changed matrix size and its application in fault diagnosis. J Sound Vib. 526, (2022). https://doi.org/10.1016/j.jsv.2022.11684810.1016/j.jsv.2022.116848 ↗

92. Zhang, Y., Bingham, C., Yang, Z., Ling, B.W.K., Gallimore, M.: Machine fault detection by signal denoising - with application to industrial gas turbines. Measurement. (Lond). 58, 230–240 (2014). https://doi.org/10.1016/j.measurement.2014.08.02010.1016/j.measurement.2014.08.020 ↗

93. Lin, Z., Chen, M., Ma, Y.: The augmented lagrange multiplier method for exact recovery of corrupted low-rank matrices. (2010). https://doi.org/10.1016/j.jsb.2012.10.01010.1016/j.jsb.2012.10.010 ↗

94. Chandrasekaran, V., Sanghavi, S., Parrilo, P.A., Willsky, A.S.: Sparse and Low-Rank Matrix Decompositions. IFAC (2009)10.3182/20090706-3-FR-2004.00249 ↗

95. Wang, Y., Pang, Y., Sun, W., Song, X.: Industrial data denoising via low-rank and sparse representations and its application in tunnel boring machine. Energies (Basel) 15(10), 3525 (2022). https://doi.org/10.3390/en1510352510.3390/en15103525 ↗

96. Vidal, R., Ma, Y., Sastry, S.S.: Robust principal component analysis. Interdiscip. Appl. Math. 40, 63–122 (2016). https://doi.org/10.1007/978-0-387-87811-9_310.1007/978-0-387-87811-9_3 ↗

97. Wang, R., Fang, H., Yu, L., Yu, L., Chen, J.: Sparse and low-rank decomposition of the time–frequency representation for bearing fault diagnosis under variable speed conditions. ISA Trans. 128, 579–598 (2022). https://doi.org/10.1016/j.isatra.2021.11.03010.1016/j.isatra.2021.11.030 ↗

98. Hou, Y., Wang, Y., Pan, Y., He, W., Huang, W., Wu, P., Wu, D.: Vibration-based incipient surge detection and diagnosis of the centrifugal compressor using adaptive feature fusion and sparse ensemble learning approach. Adv. Eng. Inform. 56, (2023). https://doi.org/10.1016/j.aei.2023.10194710.1016/j.aei.2023.101947 ↗

99. Xue, S., Hou, Y., Jin, J., Liu, Z., He, W., Wu, D., Huang, W.: Mechanism-data fusion for centrifugal compressor aerodynamic failure diagnostics based on bayesian extreme learning machine. IEEE Trans. Instrum. Meas. (2025). https://doi.org/10.1109/TIM.2025.352760910.1109/TIM.2025.3527609 ↗

100. Motahari-Nezhad, M., Jafari, S.M.: Bearing remaining useful life prediction under starved lubricating condition using time domain acoustic emission signal processing. Expert Syst Appl. 168, (2021). https://doi.org/10.1016/j.eswa.2020.11439110.1016/j.eswa.2020.114391 ↗