On the Frequencies for Structural Health Monitoring in Plates with Symmetrical Damage: An Analytical Approach
Source abstract
Abstract
The damage detection process in structures has been an important challenge for the engineering community. The design of structural health monitoring (SHM) systems usually involves selection of actuators and sensors, their positions on the structure and post-processing of output signals. This article presents an approach to determine the optimal frequencies for damage detection in plates considering the perpendicular incidence of longitudinal waves into the damage. At these optimal frequencies are observed the maximum reflected and the minimum transmitted longitudinal wave amplitudes, which are recommended to achieve the damage detection due to their higher differences in wave amplitudes when comparing healthy and damaged conditions. Higher values of two damage detection indexes are obtained at the optimal frequencies. Experimental tests are carried out considering a rectangular aluminum plate with circular piezoelectric transducers. The experimental results demonstrate the proposed approach, and highlight the importance of defining optimal frequencies to detect damage in plates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Baptista, F.G., Budoya, D.E., Almeida, V.A.D.D., Ulson, J.A.C.: An experimental study on the effect of temperature on piezoelectric sensors for impedance-based structural health monitoring. Sensors 14(1), 1208 (2014). https://doi.org/10.3390/s14010120810.3390/s140101208 ↗
2. Lopes Júnior, V., Park, G., Cudney, H.H., Inman, D.J.: Impedance-Based Structural Health Monitoring with Artificial Neural Networks. J. Intell. Mater. Syst. Struct. 11(3), 206 (2000). https://doi.org/10.1106/H0EV-7PWM-QYHW-E7VF10.1106/H0EV-7PWM-QYHW-E7VF ↗
3. Filho, J.V., Baptista, F.G., Inman, D.J.: Time-domain analysis of piezoelectric impedance-based structural health monitoring using multilevel wavelet decomposition. Mech. Syst. Signal Process. 25(5), 1550 (2011). https://doi.org/10.1016/j.ymssp.2010.12.00310.1016/j.ymssp.2010.12.003 ↗
4. Gonsalez, C.G., Silva, S., Brennan, M.J., Lopes Junior, V.: Structural damage detection in an aeronautical panel using analysis of variance. Mech. Syst. Signal Process. 52–53, 206 (2015). https://doi.org/10.1016/j.ymssp.2014.04.01510.1016/j.ymssp.2014.04.015 ↗
5. Silva, S., Gonsalez, C.G., Lopes Júnior, V.: Adaptive filter feature identification for structural health monitoring in an aeronautical panel. Struct. Health Monit. 10(5), 481 (2011). https://doi.org/10.1177/147592171037951410.1177/1475921710379514 ↗
6. Doebling, S.W., Farrar, C., Prime, M.: A summary review of vibration-based damage identification methods. Shock Vibr. Digest. 30, 91 (1998)10.1177/058310249803000201 ↗
7. Hendrick, S.: Damage detection and location in large space trusses. In: 29th Structures, Structural Dynamics and Materials Conference (1988). https://doi.org/10.2514/6.1988-2461. https://arc.aiaa.org/doi/abs/10.2514/6.1988-246110.2514/6.1988-2461 ↗
8. Povich, C., Lim, T.: An artificial neural network approach to structural damage detection using frequency response functions. In: Adaptive Structures Forum. (1994). https://doi.org/10.2514/6.1994-1751. https://arc.aiaa.org/doi/abs/10.2514/6.1994-175110.2514/6.1994-1751 ↗
9. Rhim, J., Lee, S.W.: A neural network approach for damage detection and identification of structures. Comput. Mech. 16(6), 437 (1995). https://doi.org/10.1007/BF0037056510.1007/BF00370565 ↗
10. Staszewski, W.: Intelligent signal processing for damage detection in composite materials. Composites Sci. Technol. 62(7), 941 (2002). https://doi.org/10.1016/S0266-3538(02)00008-810.1016/S0266-3538(02)00008-8 ↗
11. Dasgupta, D., KrishnaKumar, K., Wong, D., Berry, M.: Negative selection algorithm for aircraft fault detection. In: Nicosia, G., Cutello, V., Bentley, P.J., Timmis, J. (eds.) Artificial Immune Systems, pp. 1–13. Springer, Heidelberg (2004)
12. Lee, J., Kim, S.: Structural damage detection in the frequency domain using neural networks. J. Intell. Mater. Syst. Struct. 18(8), 785 (2007). https://doi.org/10.1177/1045389X0607364010.1177/1045389X06073640 ↗
13. Filho, J.V., Baptista, F.G., Inman, D.J.: A PZT-based technique for SHM using the coherence function. In: Proulx, T. (ed.) Advanced Aerospace Applications, vol. 1, pp. 111–118. Springer, New York (2011)10.1007/978-1-4419-9302-1_10 ↗
14. Ai, D., Luo, H., Wang, C., Zhu, H.: A PZT-based technique for SHM using the coherence function. Eng. Struct. 154, 38 (2018). https://doi.org/10.1016/j.engstruct.2017.10.04610.1016/j.engstruct.2017.10.046 ↗
15. Wu, X., Ghaboussi, J., Garrett, J.: Use of neural networks in detection of structural damage. Computers Struct. 42(4), 649 (1992). https://doi.org/10.1016/0045-7949(92)90132-J10.1016/0045-7949(92)90132-J ↗
16. Spillman, W., Huston, D., Fuhr, P., Lord, J.: Neural network damage detection in a bridge element. In: Proceedings of SPIE—The International Society for Optical Engineering (1993). https://doi.org/10.1117/12.14798510.1117/12.147985 ↗
17. Doebling, S., Farrar, C., Prime, M., Shevitz, D.: Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review. Technical Report No. LA-13070-MS 30, (1996). https://doi.org/10.2172/24929910.2172/249299 ↗
18. Szefi, J.T.: Helicopter gearbox isolation using periodically layered fluidic isolators. Ph.D. thesis, The Pennsylvania State University (2003)
19. Nascimento, R.F.: Wave propgation using finite element models of structural waveguide slices. Ph.D. thesis (2009). http://repositorio.unicamp.br/jspui/handle/REPOSIP/265401. Engineering School, State University of Campinas
20. Ebrahimian, M., Todorovska, M.I.: Wave propagation in a Timoshenko beam building model. J. Eng. Mech. 140(5), 04014018 (2014). https://doi.org/10.1061/(ASCE)EM.1943-7889.000072010.1061/(ASCE)EM.1943-7889.0000720 ↗
21. Nanda, N., Kapuria, S.: Spectral finite element for wave propagation analysis of laminated composite curved beams using classical and first order shear deformation theories. Composite Struct. 132, 310 (2015). https://doi.org/10.1016/j.compstruct.2015.04.06110.1016/j.compstruct.2015.04.061 ↗
22. Nucera, C., White, S., Chen, Z.M., Kim, H., di Scalea, F.L.: Claudio Nucera and Sara White and Zhi Ming Chen and Hyonny Kim and Francesco Lanza di Scalea. Struct. Health Monit. 14(6), 547 (2015). https://doi.org/10.1177/147592171559960010.1177/1475921715599600 ↗
23. Santos, R.B.: An alternative approach to design periodic rods. Ph.D. thesis (2018). http://hdl.handle.net/11449/153135. Ph.D Thesis, São Paulo State University (UNESP), School of Engineering of Ilha Solteira, Department of Mechanical Engineering, SP, Brazil
24. Ahmida, K., Arruda, J.: ON THE RELATION BETWEEN COMPLEX MODES AND WAVE PROPAGATION PHENOMENA. J. Sound Vibr. 255(4), 663 (2002). https://doi.org/10.1006/jsvi.2001.418310.1006/jsvi.2001.4183 ↗
25. Mace, B.: Wave reflection and transmission in beams. J. Sound Vibr. 97(2), 237 (1984). https://doi.org/10.1016/0022-460X(84)90320-110.1016/0022-460X(84)90320-1 ↗
26. Lee, B.C., Staszewski, W.J.: Modelling of Lamb waves for damage detection in metallic structures: Part II. Wave interactions with damage. Smart Mater. Struct. 12(5), 815 (2003)10.1088/0964-1726/12/5/019 ↗
27. Mal, A., Ricci, F., Banerjee, S., Shih, F.: A conceptual structural health monitoring system based on vibration and wave propagation. Struct. Health Monit. 4(3), 283 (2005). https://doi.org/10.1177/147592170505525410.1177/1475921705055254 ↗
28. Ryue, J., Thompson, D., White, P., Thompson, D.: Wave reflection and transmission due to defects in infinite structural waveguides at high frequencies. J. Sound Vibr. 330(8), 1737 (2011). https://doi.org/10.1016/j.jsv.2010.10.03410.1016/j.jsv.2010.10.034 ↗
29. Gonsalez-Bueno, C.G.: An investigation into the way in which longitudinal and flexural waves interact with corrosion-like damage (2019). http://hdl.handle.net/11449/181311. Ph.D Thesis, São Paulo State University (UNESP), School of Engineering of Ilha Solteira, Department of Mechanical Engineering, SP, Brazil
30. Cho, Younho: Estimation of ultrasonic guided wave mode conversion in a plate with thickness variation. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 47(3), 591 (2000). https://doi.org/10.1109/58.84204610.1109/58.842046 ↗
31. Schaal, C., Mal, A.: Lamb wave propagation in a plate with step discontinuities. Wave Motion 66, 177 (2016). https://doi.org/10.1016/j.wavemoti.2016.06.01210.1016/j.wavemoti.2016.06.012 ↗
32. Poddar, B., Giurgiutiu, V.: Scattering of Lamb waves from a discontinuity: an improved analytical approach. Wave Motion 65, 79 (2016). https://doi.org/10.1016/j.wavemoti.2016.03.00910.1016/j.wavemoti.2016.03.009 ↗
33. Cho, Y., Rose, J.L.: An elastodynamic hybrid boundary element study for elastic guided wave interactions with a surface breaking defect. Int. J. Solids Struct. 37(30), 4103 (2000). https://doi.org/10.1016/S0020-7683(99)00142-010.1016/S0020-7683(99)00142-0 ↗
34. Lowe, M.J.S., Cawley, P., Kao, J.Y., Diligent, O.: The low frequency reflection characteristics of the fundamental antisymmetric Lamb wave a0 from a rectangular notch in a plate. J. Acoust. Soc. Am. 112(6), 2612 (2002). https://doi.org/10.1121/1.151270210.1121/1.1512702 ↗
35. Lowe, M.J.S., Diligent, O.: Low-frequency reflection characteristics of the s0 Lamb wave from a rectangular notch in a plate. J. Acoust. Soc. Am. 111(1), 64 (2002). https://doi.org/10.1121/1.142486610.1121/1.1424866 ↗
36. Benmeddour, F., Grondel, S., Assaad, J., Moulin, E.: Study of the fundamental Lamb modes interaction with symmetrical notches. NDT & E International 41(5), 330 (2008). https://doi.org/10.1016/j.ndteint.2008.01.004. http://www.sciencedirect.com/science/article/pii/S096386950800007810.1016/j.ndteint.2008.01.004 ↗
37. Kim, B., Roh, Y.: Simple expressions of the reflection and transmission coefficients of fundamental lamb waves by a rectangular notch. Ultrasonics 51(6), 734 (2011). https://doi.org/10.1016/j.ultras.2011.03.00110.1016/j.ultras.2011.03.001 ↗
38. Glushkov, E., Glushkova, N., Eremin, A., Giurgiutiu, V.: Low-cost simulation of guided wave propagation in notched plate-like structures. J. Sound Vibr. 352, 80 (2015). https://doi.org/10.1016/j.jsv.2015.05.00410.1016/j.jsv.2015.05.004 ↗
39. Shen, M.H.H., Pierre, C.: Natural modes of Bernoulli-Euler beams with symmetric cracks. J. Sound Vib. 138(1), 115 (1990)10.1016/0022-460X(90)90707-7 ↗
40. Pau, A., Achillopoulou, D.: Interaction of shear and Rayleigh-lamb waves with notches and voids in plate waveguides. Materials 10, 841 (2017). https://doi.org/10.3390/ma1007084110.3390/ma10070841 ↗
41. Roberts, R.A.: GUIDED WAVE PROPAGATION IN INTEGRALLY STIFFENED PLATES. AIP Conf. Proc. 975(1), 170 (2008). https://doi.org/10.1063/1.290264310.1063/1.2902643 ↗
42. Ajith, V., Gopalakrishnan, S.: Wave propagation in stiffened structures using spectrally formulated finite element. Eur. J. Mech. A 41, 1 (2013). https://doi.org/10.1016/j.euromechsol.2013.02.00110.1016/j.euromechsol.2013.02.001 ↗
43. Haider, M.F., Bhuiyan, M.Y., Poddar, B., Lin, B., Giurgiutiu, V.: Analytical and experimental investigation of the interaction of Lamb waves in a stiffened aluminum plate with a horizontal crack at the root of the stiffener. J. Sound Vibr. 431, 212 (2018). https://doi.org/10.1016/j.jsv.2018.06.01810.1016/j.jsv.2018.06.018 ↗
44. Bhuiyan, M.Y., Haider, M.F., Poddar, B., Giurgiutiu, V.: Guided wave crack detection and size estimation in stiffened structures. In: P.J. Shull. (ed.), Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XII. International Society for Optics and Photonics (SPIE, 2018), vol. 10599, pp. 423–433. https://doi.org/10.1117/12.230997510.1117/12.2309975 ↗
45. Giurgiutiu, V.: Chapter 4 - Vibration of Plates. In: Giurgiutiu, V. (ed.), Structural Health Monitoring with Piezoelectric Wafer Active Sensors. 2nd edition, Academic Press, Oxford, pp. 145 – 197. (2014) https://doi.org/10.1016/B978-0-12-418691-0.00004-6. http://www.sciencedirect.com/science/article/pii/B978012418691000004610.1016/B978-0-12-418691-0.00004-6 ↗
46. Park, D.H., Hong, S.Y., Kil, H.G., Jeon, J.J.: POWER FLOW MODELS AND ANALYSIS OF IN-PLANE WAVES IN FINITE COUPLED THIN PLATES. J. Sound Vibr. 244(4), 651 (2001). https://doi.org/10.1006/jsvi.2000.351710.1006/jsvi.2000.3517 ↗
47. Yeo, S.J., Hong, S.Y., Song, J.H., Kwon, H.W.: Vibrational energy flow models for dilatational wave in elastic solids. Adv. Mech. Eng. 9(12), 1687814017740709 (2017). https://doi.org/10.1177/168781401774070910.1177/1687814017740709 ↗
48. Miklowitz, J.: The Theory of Elastic Waves and Waveguides. Applied mathematics and mechanics. North Holland Publishing Company, (1978). https://books.google.com.br/books?id=YiAbAQAAIAAJ
49. Golato, A., Demirli, R., Santhanam, S.: Lamb wave scattering by a symmetric pair of surface-breaking cracks in a plate. Wave Motion 51(8), 1349 (2014). https://doi.org/10.1016/j.wavemoti.2014.08.00210.1016/j.wavemoti.2014.08.002 ↗
50. Radwańska, M., Stankiewicz, A., Wosatko, A., Pamin, J.: Plate and Shell Structures: Selected Analytical and Finite Element Solutions. Wiley, (2017). https://books.google.com.br/books?id=hdWdDQAAQBAJ10.1002/9781118934531 ↗
51. Ayala Castillo, P.C.: Detection of damage in structural waveguides using high frequency waves. Master Thesis, Engineering School, Sao Paulo State University (2015). http://hdl.handle.net/11449/126595
52. Kubrusly, A.C., von der Weid, J.P., Dixon, S.: Experimental and numerical investigation of the interaction of the first four SH guided wave modes with symmetric and non-symmetric discontinuities in plates. NDT & E Int. 108, 102175 (2019). https://doi.org/10.1016/j.ndteint.2019.10217510.1016/j.ndteint.2019.102175 ↗
53. Hou, J., Wang, H., Xu, D., Jankowski, U., Wang, P.: Damage Identification Based on Adding Mass for Liquid–Solid Coupling Structures. Appl. Sci. 10(7), (2020). https://doi.org/10.3390/app1007231210.3390/app10072312 ↗
54. Hibbeler, R.: Resistência dos materiais (Portuguese edition). Prentice Hall Brazil, (2010). https://books.google.com.br/books?id=eLOJQwAACAAJ