Towards an Universal Method for Predicting Eddy-Current Sensor Characteristics in the Railway Industry
Source abstract
Abstract
Eddy current (EC) sensors placed in the vicinity of a rail track and sensitive to passing train components are safety-critical components commonly used in the railway sector. From the engineering point of view they form a system with numerous variables including their geometry, the lift-off, magnetic properties of the applied materials, the operating frequency and electrical characteristics of the built-in circuits. Although some simple configurations of the EC devices have been studied experimentally, numerically and analytically, there have so far been no universal algorithm allowing for predicting, understanding and optimizing output signals for arbitrarily device/track/wheel characteristics. A significant step towards such an universal algorithm is presented in this work, combining a linear 3D finite element modelling and a set of analytical formulas derived directly from the constants of the resonance circuit. Functions correlating the magnetic induction space/time characteristics with the circuit outputs are proposed and validated against experiment in three stages: (a) by determination of the signal from a flat thin FeSi plate (i.e. in fully controlled laboratory conditions), (b) by laboratory measurements of a highly degraded rail with uncertain material properties, (c) by tests of a commercial EC wheel detector, with reference to averaged service data. The proposed methodology can be extended to any NDT field where EC devices are applied.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses · Magnetic Field Sensors Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Banks, J., Hansford, D.C.: Examination of surface cracks in carbon and manganese steel rails by the eddy current technique. Br. J. NDT 18, 171–174 (1976)
2. Aknin, P., Placko, D., Ayasse, J.B.: Eddy current sensor for the measurement of a lateral displacement. Applications in the railway domain. Sens. Actuators A 31(1–3), 17–23 (1992)10.1016/0924-4247(92)80074-D ↗
3. Hensel, S., Strauss, T., Marinov, M.: Eddy current sensor based velocity and distance estimation in rail vehicles. IET Sci. Meas. Technol. 9(7), 875–881 (2015)10.1049/iet-smt.2014.0302 ↗
4. Engelberg, T., Mesch, F.: Eddy current sensor system for non-contact speed and distance measurement of rail vehicles. In: Computers in Railways VII. WIT Press (2000)
5. Geistler, A., Bohringer, F.: Robust velocity measurement for railway applications by fusing eddy current sensor signals. In: Conference Proceedings, 2004 IEEE Intelligent Vehicles Symposium, pp. 664–669
6. Rocha, T.J., Ramos, H.G., Ribeiro, A.L., et al.: Studies to optimize the probe response for velocity induced eddy current testing in aluminium. Measurement 67, 108–115 (2015)10.1016/j.measurement.2015.02.003 ↗
7. Zhua, W., Yina, W., Deweyb, S., et al.: Modeling and experimental study of a multi-frequency electromagnetic sensor system for rail decarburisation measurement. NDT&E Int. 86, 1–6 (2017)10.1016/j.ndteint.2016.11.004 ↗
8. Augustyniak, B., Chmielewski, M., Sablik, M.J., et al.: A new eddy current method for nondestructive testing of creep damage in austenitic boiler tubing. Nondestruct. Test. Eval. 24(1), 121–141 (2009)10.1080/10589750802195527 ↗
9. Kim, T.-O., Lee, G.-S., Kim, H.-Y., Ahn, J.-H.: Modeling of eddy current sensor using geometric and electromagnetic data. J. Mech. Sci. Technol. 21, 465–475 (2007)10.1007/BF02916308 ↗
10. Enoki, S., Asahi, T., Watanabe, S., et al.: Electromagnetic measurement of the rail displacement by two triangular coils. IEEE Trans. Magn. (2002). https://doi.org/10.1109/TMAG.2002.80229710.1109/TMAG.2002.802297 ↗
11. Klein, G., Morelli, J., Krause, T.W.: Analytical model of the eddy current response of a drive-receive coil system inside two concentric tubes. NDT&E Int. 96, 18–25 (2018)10.1016/j.ndteint.2018.03.003 ↗
12. Augustyniak, M., Usarek, Z.: Finite element method applied in electromagnetic NDTE: a review. J. Nondestruct. Eval. 35, 39 (2016)10.1007/s10921-016-0356-6 ↗
13. Bíró, O., Koczka, G., Preis, K.: Finite element solution of nonlinear eddy current problems with periodic excitation and its industrial applications. Appl. Numer. Math. 79, 3–17 (2014)10.1016/j.apnum.2013.04.007 ↗
14. Gabi, Y., Böttger, D., Straß, B. et al.: Local electromagnetic investigations on electrical steel FeSi 3% via 3MA micromagnetic NDT system. In: Proceedings of European Conference on Non-destructive Testing (ECNDT), Gothenburg, December, 2018
15. Tsukerman, I., Dombrovski, V.: Finite-element simulation of time-dependent electromagnetic fields in the end zone of superconducting motors. IEEE Trans. Magn. (2002). https://doi.org/10.1109/20.99632310.1109/20.996323 ↗
16. Gabi, Y., Martins, O., Wolter, B., Strass, B.: Combination of electromagnetic measurements and FEM simulations for nondestructive determination of mechanical hardness. AIP Adv. 8, 047502 (2018)10.1063/1.4993669 ↗
17. Szychta, E., Szychta, L., Kiraga, K.: Analytical model of a rail applied to induction heating of railway turnouts. In: Proceedings of Transport Systems Telematics (TST) 10th Conference, Poland, 20–23 October 201010.1007/978-3-642-16472-9_10 ↗
18. Żurek, Z.H.: Magnetic monitoring of the fatigue process of the rim material of railway wheel sets. NDT&E Int. 39, 675–679 (2006)10.1016/j.ndteint.2005.12.004 ↗
19. Mehboob, N.: Hysteresis properties of soft magnetic materials. PhD Thesis, Univ. Wien (2012)