A Damage Modes Extraction Method from AE Signal in Composite Laminates Based on DEEMD
Source abstract
Abstract
An extraction method of damage modes in composite laminates from acoustic emission (AE) signal based on ensemble empirical mode decomposition (EEMD) and decorrelation algorithm is proposed. Based on previous works about damage modes identification of composite laminates using AE, the peak frequency of AE signal could distinguish various damage modes effectively. Energy generated by several damage modes can be included in a single AE signal, the empirical mode decomposition (EMD) could decompose AE signal into a set of intrinsic mode functions (IMFs), the peak frequency of each IMF was chosen to identify damage modes, but the analysis show that a single IMF would include components of dramatically disparate scales. Based on the above problems, the decorrelation ensemble empirical mode decomposition (DEEMD) method is put forward, DEEMD is the more effective solution for extracting all damage modes existing in a single AE signal than EMD, can eliminate mode mixing, would provide practical application guidance for composite laminates structure damage monitoring using AE.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Machine Fault Diagnosis Techniques · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Qi, W., Fengming, Y., Yoji, O., Satoshi, K.: Application of a novel optical fiber sensor to detection of acoustic emissions by various damages in CFRP laminates. Smart Mater. Struct. 24(1), 015011 (2015)10.1088/0964-1726/24/1/015011 ↗
2. Marec, A., Thomas, J.-H., El Guerjouma, R.: Damage characterization of polymer-based composite materials: multivariable analysis and wavelet transform for clustering acoustic emission data. Mech. Syst. Signal Process. 22(6), 1441–1464 (2008)10.1016/j.ymssp.2007.11.029 ↗
3. Loutas, T.H., Kostopoulos, V., Ramirez-Jmenez, C., Pharaoh, M.: Damage evolution in center-holed glass-polyester composites under quasi-static loading using time-frequency analysis of acoustic emission monitored waveforms. Compos. Sci. Technol. 66(10), 1366–1375 (2006)10.1016/j.compscitech.2005.09.011 ↗
4. Dickinson, L.P., Fletcher, N.H.: Acoustic detection of invisible damage in aircraft composite panels. Appl. Acoust. 70(1), 110–119 (2009)10.1016/j.apacoust.2007.12.012 ↗
5. Ceysson, O., Salvia, M., Vincent, L.: Damage mechanisms characterisation of carbon fibre/epoxy composite laminates by both electrical resistance measurements and acoustic emission analysis. Scr. Mater. 34(8), 1273–1280 (1996)10.1016/1359-6462(95)00638-9 ↗
6. Xingmin, Z., Xiong, Y.: Investigation of damage mechanisms in self-reinforced polyethylene composites by acoustic emission. Compos. Sci. Technol. 66(3), 444–449 (2006)
7. Ni, Q., Iwamoto, M.: Wavelet transform of acoustic emission signals in failure of model composites. Eng. Fract. Mech. 69(6), 717–728 (2002)10.1016/S0013-7944(01)00105-9 ↗
8. Berthelot, J., Rhazi, J.: Acoustic emission in carbon fibre composites. Compos. Sci. Technol. 37(4), 411–428 (1990)10.1016/0266-3538(90)90012-T ↗
9. Barre, S., Benzeggage, M.: On the use of acoustic emission to investigate damage mechanisms in glass-fibre-reinforced polypropylene. Compos. Sci. Technol. 52(3), 369–376 (1994)10.1016/0266-3538(94)90171-6 ↗
10. Liu, P., Chu, J., Liu, Y., et al.: A study on the failure mechanisms of carbon fiber/epoxy composite laminates using acoustic emission. Mater. Des. 37, 228–235 (2012)10.1016/j.matdes.2011.12.015 ↗
11. deGroot, P.J., Wijnen, P.A.M.: Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites. Compos. Sci. Technol. 55(4), 405–412 (1995)10.1016/0266-3538(95)00121-2 ↗
12. Ramirez-Jimenez, C.R., Papadakis, N., Reynolds, N., et al.: Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event. Compos. Sci. Technol. 64(12), 1819–1827 (2004)10.1016/j.compscitech.2004.01.008 ↗
13. Gutkin, R., Green, C.J., Vangrattanachai, S., et al.: On acoustic emission for failure investigation in CFRP: pattern recognition and peak frequency analyses. Mech. Syst. Signal Process. 25(4), 1393–1407 (2011)10.1016/j.ymssp.2010.11.014 ↗
14. Han, W., Gu, L.Y., Gu, A.: Damage modes recognition and hilbert-huang transform analyses of CFRP laminates utilizing acoustic emission technique. Appl. Compos. Mater. 23(2), 155–178 (2016)10.1007/s10443-015-9454-3 ↗
15. Arumugam, V., Sajith, S., JosephStanley, A.: Acoustic emission characterization of failure modes in GFRP laminates under mode I delamination. J. Nondestruct. Eval. 30(3), 213–219 (2011)10.1007/s10921-011-0109-5 ↗
16. Du, Q.H., Yang, S.N.: Application of the EMD method in the vibration analysis of ball bearings. Mech. Syst. Signal Process. 21(6), 2634–2644 (2007)10.1016/j.ymssp.2007.01.006 ↗
17. Hamdi, S.E., Duff, A.L., Simon, L., et al.: Acoustic emission pattern recognition approach based on Hilbert-Huang transform for structural health monitoring in polymer-composite materials. Appl. Acoust. 74(5), 746–757 (2013)10.1016/j.apacoust.2012.11.018 ↗
18. Wu, Z.H., Huang, N.E.: Ensemble empirical mode decomposition: a noise-assisted data analysis method. Adv. Adapt. Data Anal. 1(01), 1–41 (2009)10.1142/S1793536909000047 ↗
19. Singh, J., Darpe, A.K., Singh, S.P.: Bearing damage assessment using Jensen–Rényi divergence based on EEMD. Mech Syst. Signal Process. 87, 307–339 (2017)10.1016/j.ymssp.2016.10.028 ↗
20. Deng, H., Doroslovacki, M.: Proportionate adaptive algorithms for network echo cancellation. IEEE Trans. Signal Process. 54, 1794–1803 (2006)10.1109/TSP.2006.872533 ↗