Applications of an Instantaneous Damage Detection Technique to Plates with Additional Complexities
Source abstract
Abstract
A guided wave based reference-free non-destructive testing (NDT) technique, which does not require direct comparison with previously obtained baseline data for defect detection, has been recently developed and applied to simple plate-like structures by the authors’ research group. In this study, the reference-free NDT technique is further advanced so that this technique can also be applied to specimens with complex structural geometries such as holes, stiffeners, and varying thickness. A unique damage-sensitive feature for each structural configuration has been extracted, and a suite of damage detection algorithms, which is applicable to all the investigated structural geometries, has been proposed. Experiments as well as numerical simulations are performed to investigate the applicability of the proposed NDT technique to structures with complex geometries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Balageas, D., Fritzen, C., Güemes, A.: Structural Health Monitoring. ISTE Ltd., London (2006)10.1002/9780470612071 ↗
2. Beral, B., Speckmann, H.: Structural Health Monitoring (SHM) for aircraft structures: a challenge for system developers and aircraft manufacturers. In: Proceedings of the 4th International Workshop on Structural Health Monitoring, 2003, Sep. 15–17, Stanford, CA, USA, pp. 12–29. DEStech, Lancaster (2003)
3. Frangopol, D.M.: New directions and research needs in life-cycle performance and cost of civil infrastructures. In: Proceedings of the 4th International Workshop on Structural Health Monitoring, 2003, Sep. 15–17, Stanford, CA, USA, pp. 53–63. DEStech, Lancaster (2003)
4. Alleyne, D.N., Cawley, P.: The interaction of Lamb waves with defects. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 39, 381–397 (1992)10.1109/58.143172 ↗
5. Giurgiutiu, V.: Structural Health Monitoring with Piezoelectric Wafer Active Sensors. Academic Press, Boston (2008)
6. Wilcox, P.D., Lowe, M.J.S., Cawley, P.: Mode and transducer selection for long range Lamb wave inspection. J. Intell. Mater. Syst. Struct. 12, 553–565 (2001)10.1177/10453890122145348 ↗
7. Betz, D.C., Thursby, G., Culshaw, B., Staszewski, W.J.: Structural damage location with fiber bragg grating rosette and Lamb waves. Struct. Health Monit. 6, 299–308 (2007)10.1177/1475921707081974 ↗
8. Staszewski, W.J., Pierce, S.G., Worden, K., Philp, W.R., Tomlinson, G.R., Culshaw, B.: Wavelet signal processing for enhanced Lamb-wave defect detection in composite plates using optical fiber detection. Opt. Eng. 36, 1877–1888 (1997)10.1117/1.601380 ↗
9. Rizzo, P., Cammarata, M., Dutta, D., Sohn, H., Harries, K.: An unsupervised learning algorithm for fatigue crack detection in waveguides, Smart Struct. Mater. 18 (2009). Available online. doi: 10.1088/0964-1726/18/2/02501610.1088/0964-1726/18/2/025016 ↗
10. Cegla, F.B., Rohde, A., Veidt, M.: Analytical prediction and experimental measurement for mode conversion and scattering of plate waves at non-symmetric circular blind holes in isotropic plates. Wave Motion 45, 162–177 (2008)10.1016/j.wavemoti.2007.05.005 ↗
11. Tuzzeo, D., Lanza di Scalea, F.: Noncontact air-coupled guided wave ultrasonics for detection of thinning defects in aluminum plates. Res. Nondestruct. Eval. 13, 61–78 (2001)10.1080/09349840109409687 ↗
12. Kundu, T., Banerjee, S., Jata, K.V.: An experimental investigation of guided wave propagation in corrugated plates showing stop bands and pass bands. J. Acoust. Soc. Am. 120, 1217–1226 (2006)10.1121/1.2221534 ↗
13. Banerjee, S., Mal, A.K., Prosser, W.H.: Analysis of transient Lamb waves generated by dynamic surface sources in thin composite plates. J. Acoust. Soc. Am. 115, 1905–1911 (2004)10.1121/1.1694993 ↗
14. Giurgiutiu, V., Bao, J., Zhao, W.: Piezoelectric wafer active sensor embedded ultrasonics in beams and plates. Exp. Mech. 43(4), 428–449 (2003)10.1007/BF02411348 ↗
15. Sohn, H.: Effects of environmental and operational variability on structural health monitoring. Philos. Trans. R. Soc. A 365, 539–560 (1851) (2007)10.1098/rsta.2006.1935 ↗
16. Kim, S.B., Sohn, H.: Baseline-free crack detection in steel structures using Lamb waves and PZT polarity. Earthq. Eng. Soc. Korea 10(6), 79–91 (2006)10.5000/EESK.2006.10.6.079 ↗
17. Kim, S.B., Sohn, H.: Instantaneous reference-free crack detection based on polarization characteristics of piezoelectric materials. Smart Mater. Struct. 16(6), 2375–2387 (2007)10.1088/0964-1726/16/6/042 ↗
18. Cho, Y.: Estimation of ultrasonic guided wave mode conversion in a plate with thickness variation. IEEE Trans. Ultrason. Ferroelectr., Freq. Control 47(3), 591–603 (2000)10.1109/58.842046 ↗
19. Fraden, J.: Handbook of Modern Sensors. American Institute of Physics, New York (2001)
20. Buchanan, R.C.: Ceramic Materials for Electronics. Marcel Dekker, New York (2004)
21. Giurgiutiu, V., Zagrai, A.N.: Characterization of piezoelectric wafer active sensors. J. Intell. Mater. Syst. Struct. 11, 959–976 (2000)10.1106/A1HU-23JD-M5AU-ENGW ↗
22. Fromme, P., Sayir, B.M.: Measurement of the scattering of a Lamb wave by a through hole in a plate. J. Acoust. Soc. Am. 111, 1165–1170 (2000)10.1121/1.1448338 ↗
23. Rose, J.L.: Ultrasonic Waves in Solid Media. Cambridge University Press, New York (1999)
24. Song, W.J., Rose, J.L., Galan, J.M., Abascal, R.: Ultrasonic guided wave scattering in a plate overlap. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 52, 892–903 (2005)10.1109/TUFFC.2005.1503975 ↗
25. Sohn, H., Kim, S.B.: Development of dual PZT Transducers for instantaneous crack detection in thin plate structures. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 57(1), 229–240 (2010)10.1109/TUFFC.2010.1401 ↗