Scattering Analysis of Glaze Ice Accretion on CFRP Laminated Composite Plate Structures Using Ultrasonic Lamb Waves: Towards Aviation Safety
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Icing and De-icing Technologies · Smart Materials for Construction · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Krautkrämer, J., Krautkrämer, H.: Ultrasonic testing by determination of material properties. In: Ultrasonic Testing of Materials. Springer, Berlin (1990)10.1007/978-3-662-10680-8 ↗
2. Gupta, S., Rajagopal, P.: S0 Lamb mode scattering studies in laminated composite plate structures with surface breaking cracks; insights into crack opening behavior. Ultrasonics, 129, 106901 (2023). https://doi.org/10.1016/j.ultras.2022.10690110.1016/j.ultras.2022.106901 ↗
3. Gholizadeh, S.: A review of non-destructive testing methods of composite materials. Procedia Struct. Integr. 1, 50–57 (2016). https://doi.org/10.1016/j.prostr.2016.02.00810.1016/j.prostr.2016.02.008 ↗
4. Michaels, J.E.: Detection, localization and characterization of damage in plates with an in-situ array of spatially distributed ultrasonic sensors. Smart Mater. Struct. 17(3), 035035 (2008). https://doi.org/10.1088/0964-1726/17/3/035035/meta10.1088/0964-1726/17/3/035035/meta ↗
5. Taheri, H., Hassen, A.A.: Nondestructive ultrasonic inspection of composite materials: a comparative advantage of phased array ultrasonic. Appl. Sci. 9(8), 1628 (2019). https://doi.org/10.3390/app908162810.3390/app9081628 ↗
6. Campos-Castellanos, C., Gharaibeh, Y., Mudge, P., Kappatos, V.: The application of long-range ultrasonic testing (LRUT) for examination of hard to access areas on railway tracks. IET Digit. Libr. (2011). https://doi.org/10.1049/cp.2011.061810.1049/cp.2011.0618 ↗
7. Khalili, P., Cawley, P.: The choice of ultrasonic inspection method for the detection of corrosion at inaccessible locations. NDT & E Int. 99, 80–92 (2018). https://doi.org/10.1016/j.ndteint.2018.06.00310.1016/j.ndteint.2018.06.003 ↗
8. di Scalea, F.L., McNamara, J.: Ultrasonic NDE of railroad tracks: air-coupled cross-sectional inspection and long-range inspection. Insight-Non-Destruct. Test. Cond. Monit. 45(6), 394–401 (2003). https://doi.org/10.1784/insi.45.6.394.5289010.1784/insi.45.6.394.52890 ↗
9. Mudge, P.J., Catton, P.: Quantification of defect size from long range guided wave ultrasonic tests on pipes. In: AIP Conference Proceedings, vol. 975, no. 1, pp. 147–154 (2008). American Institute of Physics. https://doi.org/10.1063/1.290261010.1063/1.2902610 ↗
10. Bartoli, I., di Scalea, F.L., Fateh, M., Viola, E.: Modeling guided wave propagation with application to the long-range defect detection in railroad tracks. NDT & E Int. 38(5), 325–334 (2005). https://doi.org/10.1016/j.ndteint.2004.10.00810.1016/j.ndteint.2004.10.008 ↗
11. Sibilski, K., Lasek, M., Ladyzynska-Kozdras, E., Maryniak, J.: Aircraft climbing flight dynamics with simulated ice accretion. In: AIAA Atmospheric Flight Mechanics Conference and Exhibit, p. 4948 (2004). https://doi.org/10.2514/6.2004-494810.2514/6.2004-4948 ↗
12. Cao, Y., Huang, J., Yin, J.: Numerical simulation of three-dimensional ice accretion on an aircraft wing. Int. J. Heat Mass Transf. 92, 34–54 (2016). https://doi.org/10.1016/j.ijheatmasstransfer.2015.08.02710.1016/j.ijheatmasstransfer.2015.08.027 ↗
13. Zhang, X., Wu, X., Min, J.: Aircraft icing model considering both rime ice property variability and runback water effect. Int. J. Heat Mass Transf. 104, 510–516 (2017). https://doi.org/10.1016/j.ijheatmasstransfer.2016.08.08610.1016/j.ijheatmasstransfer.2016.08.086 ↗
14. Politovich, M.K.: Predicting glaze or rime ice growth on airfoils. J. Aircr. 37(1), 117–121 (2000). https://doi.org/10.2514/2.257010.2514/2.2570 ↗
15. Alemour, B., Badran, O., Hassan, M.R.: A review of using conductive composite materials in solving lightening strike and ice accumulation problems in aviation. J. Aerosp. Technol. Manag. (2019). https://doi.org/10.5028/jatm.v11.102210.5028/jatm.v11.1022 ↗
16. Perkins, P., Rieke, W.: Aircraft icing problems-after 50 years. In: 31st Aerospace Sciences Meeting, p. 392, (1993). https://doi.org/10.2514/6.1993-39210.2514/6.1993-392 ↗
17. Cao, Y., Wu, Z., Su, Y., Xu, Z.: Aircraft flight characteristics in icing conditions. Prog. Aerosp. Sci. 74, 62–80 (2015). https://doi.org/10.1016/j.paerosci.2014.12.00110.1016/j.paerosci.2014.12.001 ↗
18. Lynch, F.T., Khodadoust, A.: Effects of ice accretions on aircraft aerodynamics. Prog. Aerosp. Sci. 37(8), 669–767 (2001). https://doi.org/10.1016/S0376-0421(01)00018-510.1016/S0376-0421(01)00018-5 ↗
19. Bagherzadeh, S.A., Asadi, D.: Detection of the ice assertion on aircraft using empirical mode decomposition enhanced by multi-objective optimization. Mech. Syst. Signal Process. 88, 9–24 (2017). https://doi.org/10.1016/j.ymssp.2016.11.01310.1016/j.ymssp.2016.11.013 ↗
20. Jarvinen, P.: Aircraft ice detection method. In: 45th AIAA Aerospace Sciences Meeting and Exhibit, p. 696 (2007). https://doi.org/10.2514/6.2007-69610.2514/6.2007-696 ↗
21. Ikiades, A.A.: Direct ice detection based on fiber optic sensor architecture. Appl. Phys. Lett. 91(10), 104104 (2007). https://doi.org/10.1063/1.277218310.1063/1.2772183 ↗
22. Ikiades, A.: Fiber optic ice sensor for measuring ice thickness, type and the freezing fraction on aircraft wings. Aerospace 10(1), 31 (2022). https://doi.org/10.3390/aerospace1001003110.3390/aerospace10010031 ↗
23. Gonzalez, M., Frövel, M.: Fiber Bragg grating sensors ice detection: methodologies and performance. Sens. Actuators A 346, 113778 (2022). https://doi.org/10.1016/j.sna.2022.11377810.1016/j.sna.2022.113778 ↗
24. Ikiades, A.A., Armstrong, D.J., Hare, G.G., Konstantaki, M., Crossley, S.D.: Fiber optic sensor technology for air conformal ice detection. In: Industrial and Highway Sensors Technology, vol. 5272, pp. 357–368. SPIE (2004). https://doi.org/10.1117/12.51691010.1117/12.516910 ↗
25. Shajiee, S., Pao, L.Y., Wagner, P.N., Moore, E.D., McLeod, R.R.: Direct ice sensing and localized closed-loop heating for active de-icing of wind turbine blades. In: 2013 American Control Conference, pp. 634–639. IEEE (2013). https://doi.org/10.1109/ACC.2013.657990810.1109/ACC.2013.6579908 ↗
26. Fortin, G., Perron, J.: Wind turbine icing and de-icing. In: 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, p. 274 (2009). https://doi.org/10.2514/6.2009-27410.2514/6.2009-274 ↗
27. Ikiades, A., Howard, G., Armstrong, D.J., Konstantaki, M., Crossley, S.: Measurement of optical diffusion properties of ice for direct detection ice accretion sensors. Sens. Actuators A 140(1), 24–31 (2007). https://doi.org/10.1016/j.sna.2007.05.03610.1016/j.sna.2007.05.036 ↗
28. Kozak, R., Wiltshire, B.D., Khandoker, M.A.R., Golovin, K., Zarifi, M.H.: Modified microwave sensor with a patterned ground heater for detection and prevention of ice accumulation. ACS Appl. Mater. Interfaces 12(49), 55483–55492 (2020). https://doi.org/10.1021/acsami.0c1717310.1021/acsami.0c17173 ↗
29. Leleux, A., Micheau, P., Castaings, M.: Long range detection of defects in composite plates using lamb waves generated and detected by ultrasonic phased array probes. J. Nondestruct. Eval. 32, 200–214 (2013). https://doi.org/10.1007/s10921-013-0173-010.1007/s10921-013-0173-0 ↗
30. Staszewski, W.J.: Ultrasonic/guided waves for structural health monitoring. In: Key Engineering Materials, vol. 293, pp. 49–62. Trans Tech Publications Ltd, Zurich (2005)
31. Wilcox, P., Lowe, M., Cawley, P.: The effect of dispersion on long-range inspection using ultrasonic guided waves. NDT & E Int. 34(1), 1–9 (2001). https://doi.org/10.1016/S0963-8695(00)00024-410.1016/S0963-8695(00)00024-4 ↗
32. Rose, J.L.: A baseline and vision of ultrasonic guided wave inspection potential. J. Press. Vessel. Technol. 124(3), 273–282 (2002). https://doi.org/10.1115/1.149127210.1115/1.1491272 ↗
33. Qu, J., Liu, G.: Effects of residual stress on guided waves in layered media. Rev. Progr. Quant. Nondestruct. Eval. 17A, 1635–1642 (1998). https://doi.org/10.1007/978-1-4615-5339-7_21210.1007/978-1-4615-5339-7_212 ↗
34. Phan, H., Cho, Y., Pham, C.V., Nguyen, H., Bui, T.Q.: A theoretical approach for guided waves in layered structures. In: AIP Conference Proceedings, vol. 2102, no. 1, p. 050011. AIP Publishing LLC (2019). https://doi.org/10.1063/1.509977710.1063/1.5099777 ↗
35. Bars, I.E.: Brian Pavlakovic, Mike Lowe, and Peter Cawley Imperial College NDT Laboratory Mechanical Engineering Building. Rev. Progr. Quant. Nondestruct. Eval. 18, 207 (2012)
36. Veidt, M., Ng, C.-T.: Influence of stacking sequence on scattering characteristics of the fundamental anti-symmetric Lamb wave at through holes in composite laminates. J. Acoust. Soc. Am. 129(3), 1280–1287 (2011). https://doi.org/10.1121/1.353374210.1121/1.3533742 ↗
37. Makkonen, L.: Models for the growth of rime, glaze, icicles and wet snow on structures. Philos. Trans. R. Soc. Lond. Ser. A 358(1776), 2913–2939 (2000)10.1098/rsta.2000.0690 ↗
38. Mellor, M.: Mechanical behavior of sea ice. In: The Geophysics of Sea Ice, pp. 165–281. Springer, Boston (1986)10.1007/978-1-4899-5352-0_3 ↗
39. Gao, H., Rose, J.L.: Ice detection and classification on an aircraft wing with ultrasonic shear horizontal guided waves. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 56(2), 334–344 (2009). https://doi.org/10.1109/TUFFC.2009.104210.1109/TUFFC.2009.1042 ↗
40. Manual, A.S.U.S.: Abaqus 6.11. http://130.149, 89(2080), v6 (2012)
41. Börgesson, L.: Abaqus. In: Developments in Geotechnical Engineering, vol. 79, pp. 565–570. Elsevier, New York (1996)
42. Wang, Y., Pasiliao, C.L.: Modeling ablation of laminated composites: a novel manual mesh moving finite element analysis procedure with ABAQUS. Int. J. Heat Mass Transf. 116, 306–313 (2018). https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.03810.1016/j.ijheatmasstransfer.2017.09.038 ↗
43. Wilcox, P., Lowe, M., Cawley, P.: Long range Lamb wave inspection: the effect of dispersion and modal selectivity. In: Thompson, D.O., Chimenti, D.E. (eds.) Review of Progress in Quantitative Nondestructive Evaluation, vol. 18A. Springer, Boston (1999)
44. Keefe, D.H., Ling, R., Bulen, J.C.: Method to measure acoustic impedance and reflection coefficient. J. Acoust. Soc. Am. 91(1), 470–485 (1992). https://doi.org/10.1121/1.40273310.1121/1.402733 ↗
45. Chen, H., Fan, D., Huang, J., Huang, W., Zhang, G., Huang, L.: Finite element analysis model on ultrasonic phased array technique for material defect time of flight diffraction detection. Sci. Adv. Mater. 12(5), 665–675 (2020). https://doi.org/10.1166/sam.2020.368910.1166/sam.2020.3689 ↗
46. Prosser, W.H., Seale, M.D., Smith, B.T.: Time-frequency analysis of the dispersion of Lamb modes. J. Acoust. Soc. Am. 105(5), 2669–2676 (1999). https://doi.org/10.1121/1.42688310.1121/1.426883 ↗
47. Ing, R.K., Fink, M.: Time recompression of dispersive Lamb waves using a time reversal mirror-application to flaw detection in thin plates. In: Proceedings of IEEE Ultrasonics Symposium, vol. 1, pp. 659–663. IEEE (1996). https://doi.org/10.1109/ULTSYM.1996.58406110.1109/ULTSYM.1996.584061 ↗
48. Palacios, J., Zhu, Y., Smith, E., Rose, J.: Ultrasonic shear and lamb wave interface stress for helicopter rotor de-icing purposes. In: 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 14th AIAA/ASME/AHS Adaptive Structures Conference 7th, p. 2282 (2006). https://doi.org/10.2514/6.2006-228210.2514/6.2006-2282 ↗
49. Lax, M.: Multiple scattering of waves. Rev. Mod. Phys. 23(4), 287 (1951). https://doi.org/10.1103/RevModPhys.23.28710.1103/RevModPhys.23.287 ↗
50. Yang, R.B., Mal, A.K.: Multiple scattering of elastic waves in a fiber-reinforced composite. J. Mech. Phys. Solids 42(12), 1945–1968 (1994). https://doi.org/10.1016/0022-5096(94)90020-510.1016/0022-5096(94)90020-5 ↗
51. Sharma, J.N., Pal, M.: Propagation of Lamb waves in a transversely isotropic piezothermoelastic plate. J. Sound Vib. 270(4–5), 587–610 (2004). https://doi.org/10.1016/S0022-460X(03)00093-210.1016/S0022-460X(03)00093-2 ↗
52. Lee, H.S., Kim, Y.Y.: Guided wave scattering analysis for a plate with arbitrarily shaped elastic inclusions using the T-matrix method. J. Sound Vib. 360, 97–111 (2016). https://doi.org/10.1016/j.jsv.2015.09.00310.1016/j.jsv.2015.09.003 ↗
53. Cho, Y., Rose, J.L.: A boundary element solution for a mode conversion study on the edge reflection of Lamb waves. J. Acoust. Soc. Am. 99(4), 2097–2109 (1996). https://doi.org/10.1121/1.41539610.1121/1.415396 ↗
54. Hayashi, T., Song, W.J., Rose, J.L.: Guided wave dispersion curves for a bar with an arbitrary cross-section, a rod and rail example. Ultrasonics 41(3), 175–183 (2003). https://doi.org/10.1016/S0041-624X(03)00097-010.1016/S0041-624X(03)00097-0 ↗
55. Liu, G.R., Achenbach, J.D.: Strip element method to analyze wave scattering by cracks in anisotropic laminated plates. J. Appl. Mech. (1995). https://doi.org/10.1115/1.289598910.1115/1.2895989 ↗
56. Pain, H.J., Rankin, P.: Introduction to Vibrations and Waves. Wiley, New York (2015)
57. Pain, H.J.: The physics of vibrations and waves (2001). https://doi.org/10.1119/1.476568510.1119/1.4765685 ↗
58. Pavlakovic, B., Lowe, M., Alleyne, D., Cawley, P.: Disperse: a general purpose program for creating dispersion curves. Rev. Progr. Quant. Nondestruct. Eval 16A, 185–192 (1997). https://doi.org/10.1007/978-1-4615-5947-4_2410.1007/978-1-4615-5947-4_24 ↗