Hardness and Ferrite Grain Size Evaluation of X70 Steel Using Magnetic Barkhausen Noise Method
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Magnetic Properties and Applications · Non-Destructive Testing Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Costin, W.L., Lavigne, O., Kotousov, A.: A study on the relationship between microstructure and mechanical properties of acicular ferrite and upper bainite. Mater. Sci. Eng. A 663, 193–203 (2016). https://doi.org/10.1016/j.msea.2016.03.10310.1016/j.msea.2016.03.103 ↗
2. Costin, W.L., Lavigne, O., Kotousov, A., Ghomashchi, R., Linton, V.: Investigation of hydrogen assisted cracking in acicular ferrite using site-specific micro-fracture tests. Mater. Sci. Eng. A 651, 859–868 (2016). https://doi.org/10.1016/j.msea.2015.11.04410.1016/j.msea.2015.11.044 ↗
3. Yakubtsov, I.A., Poruks, P., Boyd, J.D.: Microstructure and mechanical properties of bainitic low carbon high strength plate steels. Mater. Sci. Eng. A 480(1–2), 109–116 (2008). https://doi.org/10.1016/j.msea.2007.06.06910.1016/j.msea.2007.06.069 ↗
4. Tavares, S.S.M., Pedroza, P.D., Teodosio, J.R., Gurova, T.: Mechanical properties of a quenched and tempered dual phase steel. Scr. Mater. 40(8), 887–892 (1999). https://doi.org/10.1016/S1359-6462(99)00042-110.1016/S1359-6462(99)00042-1 ↗
5. Chastukhin, A.V., Ringinen, D.A., Khadeev, G.E., Efron, L.I.: Effect of reheating on grain size evolution in high strength line pipe steel. Mater Sci Forum Trans Tech Publ (2013). https://doi.org/10.4028/www.scientific.net/MSF.753.44910.4028/www.scientific.net/MSF.753.449 ↗
6. Wang, Z., Zhang, J., Sui, H., Shi, F.: Non-destructive evaluation of corrosion degree of thermal barrier coatings using fluorescence. NDT and E Int. 137, 102829 (2023). https://doi.org/10.1016/j.ndteint.2023.10282910.1016/j.ndteint.2023.102829 ↗
7. C.-L. Huang, Y. Wu, X. He, M. Dersch, X. Zhu, and J. S. Popovics, “A review of non-destructive evaluation techniques for axial thermal stress and neutral temperature measurement in rail: Physical phenomena and performance assessment,” NDT & E International, , 2023, https://doi.org/10.1016/j.ndteint.2023.102832.10.1016/j.ndteint.2023.102832 ↗
8. Nturambirwe, J.F.I., Opara, U.L.: Machine learning applications to non-destructive defect detection in horticultural products. Biosyst. Eng. 189, 60–83 (2020). https://doi.org/10.1016/j.biosystemseng.2019.11.01110.1016/j.biosystemseng.2019.11.011 ↗
9. Abe, M., Fujioka, T., Nagata, Y.: Location of a defect in a concrete block by a non-destructive technique. Acoust. Sci. Technol. 23(6), 308–312 (2002). https://doi.org/10.1250/ast.23.30810.1250/ast.23.308 ↗
10. Nebair, H., Helifa, B., Bensaid, S., Zidelmel, S., Lefkaier, I.K.: Martensite morphology and volume fraction evaluation of dual-phase X70 steel using magnetic Barkhausen noise technique. J. Magn. Magn. Mater. 555, 169397 (2022). https://doi.org/10.1016/j.jmmm.2022.16939710.1016/j.jmmm.2022.169397 ↗
11. Zhou, L., Davis, C., Kok, P.: Steel microstructure–magnetic permeability modelling: the effect of ferrite grain size and phase fraction. J. Magn. Magn. Mater. 519, 167439 (2021). https://doi.org/10.1016/j.jmmm.2020.16743910.1016/j.jmmm.2020.167439 ↗
12. Du, J., Strangwood, M., Davis, C.L.: Effect of TiN particles and grain size on the charpy impact transition temperature in steels. J. Mater. Sci. Technol. 28(10), 878–888 (2012). https://doi.org/10.1016/S1005-0302(12)60146-710.1016/S1005-0302(12)60146-7 ↗
13. Samimi, A.A., Krause, T.W., Clapham, L.: Multi-parameter evaluation of magnetic Barkhausen noise in carbon steel. J. Nondestr. Eval. 35, 1–8 (2016). https://doi.org/10.1007/s10921-016-0358-410.1007/s10921-016-0358-4 ↗
14. Altpeter, I.: Nondestructive evaluation of cementite content in steel and white cast iron using inductive Barkhausen noise. J. Nondestr. Eval. 15, 45–60 (1996). https://doi.org/10.1007/BF0072913410.1007/BF00729134 ↗
15. Stewart, D.M., Stevens, K.J., Kaiser, A.B.: Magnetic Barkhausen noise analysis of stress in steel. Curr. Appl. Phys. 4(2–4), 308–311 (2004). https://doi.org/10.1016/j.cap.2003.11.03510.1016/j.cap.2003.11.035 ↗
16. Hang, C., Liu, W., Dobmann, G., Chen, W., Wang, P., Li, K.: Feature extraction and evaluation for quantitative prediction of hardness in bearing steel based on magnetic Barkhausen noise. NDT and E Int. 139, 102937 (2023). https://doi.org/10.1016/j.ndteint.2023.10293710.1016/j.ndteint.2023.102937 ↗
17. Ding, S., Tian, G., Sutthaweekul, R.: Non-destructive hardness prediction for 18CrNiMo7-6 steel based on feature selection and fusion of Magnetic Barkhausen Noise. NDT and E Int. 107, 102138 (2019). https://doi.org/10.1016/j.ndteint.2019.10213810.1016/j.ndteint.2019.102138 ↗
18. Sorsa, A., Leiviskä, K., Santa-aho, S., Lepistö, T.: Quantitative prediction of residual stress and hardness in case-hardened steel based on the Barkhausen noise measurement. NDT and E Int. 46, 100–106 (2012). https://doi.org/10.1016/j.ndteint.2011.11.00810.1016/j.ndteint.2011.11.008 ↗
19. Moorthy, V., Shaw, B.A., Evans, J.T.: Evaluation of tempering induced changes in the hardness profile of case-carburised EN36 steel using magnetic Barkhausen noise analysis. NDT and E Int. 36(1), 43–49 (2003). https://doi.org/10.1016/S0963-8695(02)00070-110.1016/S0963-8695(02)00070-1 ↗
20. Koo, K.M., Yau, M.Y., Ng, D.H.L., Lo, C.C.H.: Characterization of pearlite grains in plain carbon steel by Barkhausen emission. Mater. Sci. Eng. A 351(1–2), 310–315 (2003). https://doi.org/10.1016/S0921-5093(02)00859-610.1016/S0921-5093(02)00859-6 ↗
21. Ng, D.H.L., Cho, K.S., Wong, M.L., Chan, S.L.I., Ma, X.-Y., Lo, C.C.H.: Study of microstructure, mechanical properties, and magnetization process in low carbon steel bars by Barkhausen emission. Mater. Sci. Eng. A 358(1–2), 186–198 (2003). https://doi.org/10.1016/S0921-5093(03)00295-810.1016/S0921-5093(03)00295-8 ↗
22. Anglada-Rivera, J., Padovese, L.R., Capo-Sanchez, J.: Magnetic Barkhausen noise and hysteresis loop in commercial carbon steel: influence of applied tensile stress and grain size. J. Magn. Magn. Mater. 231(2–3), 299–306 (2001). https://doi.org/10.1016/S0304-8853(01)00066-X10.1016/S0304-8853(01)00066-X ↗
23. Yamaura, S., Furuya, Y., Watanabe, T.: The effect of grain boundary microstructure on Barkhausen noise in ferromagnetic materials. Acta Mater. 49(15), 3019–3027 (2001). https://doi.org/10.1016/S1359-6454(01)00189-610.1016/S1359-6454(01)00189-6 ↗
24. Ranjan, R., Jiles, D.C., Buck, O., Thompson, R.B.: Grain size measurement using magnetic and acoustic Barkhausen noise. J. Appl. Phys. 61(8), 3199–3201 (1987). https://doi.org/10.1063/1.33890010.1063/1.338900 ↗
25. Ktena, A., et al.: Barkhausen noise as a microstructure characterization tool. Physica B Condens Matter 435, 109–112 (2014). https://doi.org/10.1016/j.physb.2013.09.02710.1016/j.physb.2013.09.027 ↗
26. J. Pal’a and J. Bydžovský, “Barkhausen noise as a function of grain size in non-oriented FeSi steel,” Measurement, 2013, https://doi.org/10.1016/j.measurement.2012.10.014.10.1016/j.measurement.2012.10.014 ↗
27. Neslušan, M., Minárik, P., Grenčík, J., Trojan, K., Zgútová, K.: Non-destructive evaluation of the railway wheel surface damage after long-term operation via Barkhausen noise technique. Wear 420, 195–206 (2019). https://doi.org/10.1016/j.wear.2018.10.01610.1016/j.wear.2018.10.016 ↗
28. Sakamoto, H., Okada, M., Homma, M.: Theoretical analysis of Barkhausen noise in carbon steels. IEEE Trans. Magn. 23(5), 2236–2238 (1987). https://doi.org/10.1109/TMAG.1987.106566410.1109/TMAG.1987.1065664 ↗
29. Perez-Benitez, J.A., Padovese, L.R., Capo-Sanchez, J., Anglada-Rivera, J.: Investigation of the magnetic Barkhausen noise using elementary signals parameters in 1000 commercial steel. J. Magn. Magn. Mater. 263(1–2), 72–77 (2003). https://doi.org/10.1016/S0304-8853(02)01536-610.1016/S0304-8853(02)01536-6 ↗
30. A. Hug-Amalric, X. Kleber, J. Merlin, and H. Petitgand, “Dual-phase steels characterization using magnetic Barkhausen noise measurements,” in Materials Science Forum, Trans Tech Publ, 2005, pp. 639–646, https://doi.org/10.4028/www.scientific.net/MSF.500-501.63910.4028/www.scientific.net/MSF.500-501.639 ↗
31. Hug-Amalric, A., Kleber, X., Merlin, J., Petitgand, H., Meilland, P.: Characterization of metallurgical transformations in multi-phase high strength steels by barkhausen noise measurement. Mater Sci Forum Trans Tech Publ (2007). https://doi.org/10.4028/www.scientific.net/MSF.539-543.428310.4028/www.scientific.net/MSF.539-543.4283 ↗
32. M.I.B. Jadhav, (2018) Statistical influence on the measurement of electromagnetic parameters for structural steels. Int J Res Appl Sci Eng Technol. https://doi.org/10.22214/ijraset.2018.6038.10.22214/ijraset.2018.6038 ↗
33. Schneider, C.A., Rasband, W.S., Eliceiri, K.W.: NIH Image to ImageJ: 25 years of image analysis. Nat. Methods 9(7), 671–675 (2012). https://doi.org/10.1038/nmeth.208910.1038/nmeth.2089 ↗
34. Abràmoff, M.D., Magalhães, P.J., Ram, S.J.: Image processing with ImageJ. Biophotonics international 11(7), 36–42 (2004)
35. Kang, Y., Jeong, S., Kang, J.-H., Lee, C.: Factors affecting the inclusion potency for acicular ferrite nucleation in high-strength steel welds. Metall. Mater. Trans. A 47, 2842–2854 (2016). https://doi.org/10.1007/s11661-016-3456-010.1007/s11661-016-3456-0 ↗
36. Zhao, H., Palmiere, E.J.: Effect of austenite grain size on acicular ferrite transformation in a HSLA steel. Mater Charact 145, 479–489 (2018). https://doi.org/10.1016/j.matchar.2018.09.01310.1016/j.matchar.2018.09.013 ↗
37. Gregg, J.M., Bhadeshia, H.: Solid-state nucleation of acicular ferrite on minerals added to molten steel. Acta Mater. 45(2), 739–748 (1997). https://doi.org/10.1016/S1359-6454(96)00187-510.1016/S1359-6454(96)00187-5 ↗
38. R. Villegas, A. Redjaimia, M. Confente, and M. T. Perrot-Simonetta, “Fractal nature of acicular ferrite, and fine precipitation in medium carbon micro-alloyed forging steels,” Proc. New Developments on Metallurgy and Applications of High Strength Steels. Ed. Asoc. Argentina de Materiális. Buenos Aires, 2008.
39. Ka, A., Hj, K.: The effects of heating rate on austenite grain growth in a Ti-modified SAE 8620 Steel with controlled niobium additions. ISIJ Int. 47(7), 1034–1041 (2007). https://doi.org/10.2355/isijinternational.47.103410.2355/isijinternational.47.1034 ↗
40. Wu, K.M., Inagawa, Y., Enomoto, M.: Three-dimensional morphology of ferrite formed in association with inclusions in low-carbon steel. Mater Charact 52(2), 121–127 (2004). https://doi.org/10.1016/j.matchar.2004.04.00410.1016/j.matchar.2004.04.004 ↗
41. Qi, X., Wang, X., Di, H., Shen, X., Huan, P., He, J., Chen, L.: Acicular ferrite nucleation mechanism in laser-MAG hybrid welds of X100 pipeline steel. Mater. Lett. 304, 130603 (2021). https://doi.org/10.1016/j.matlet.2021.13060310.1016/j.matlet.2021.130603 ↗
42. Shao, Y., Liu, C., Yan, Z., Li, H., Liu, Y.: Formation mechanism and control methods of acicular ferrite in HSLA steels: A review. J. Mater. Sci. Technol. 34(5), 737–744 (2018). https://doi.org/10.1016/j.jmst.2017.11.02010.1016/j.jmst.2017.11.020 ↗
43. Wang, C., Wang, X., Kang, J., Yuan, G., Wang, G.: Effect of austenitization conditions on the transformation behavior of low carbon steel containing Ti–Ca oxide particles. Materials 12(7), 1070 (2019). https://doi.org/10.3390/ma1207107010.3390/ma12071070 ↗
44. Zidelmel, S., Rayane, K., Kaouka, A.: Effects of thermo-mechanical parameters on microstructural and mechanical properties of API X70 steel. JOM (2024). https://doi.org/10.1007/s11837-023-06333-010.1007/s11837-023-06333-0 ↗
45. Wu, D., Wang, F., Cheng, J., Li, C.: Effect of Nb and V on austenite grain growth behavior of the Cr-Mo-V steel for brake discs. High Temp. Mater. Processes (London) 37(9–10), 899–907 (2018). https://doi.org/10.1515/htmp-2017-007710.1515/htmp-2017-0077 ↗
46. Neslušan, M., Zgútová, K., Pitoňák, M., Kajánek, D.: Influence of magnetizing conditions on Barkhausen noise in Fe soft magnetic materials after thermo-mechanical treatment. Materials 15(20), 7239 (2022). https://doi.org/10.3390/ma1520723910.3390/ma15207239 ↗
47. S. Kaappa, and L. Laurson (2023) Barkhausen noise from formation of 360° domain walls in disordered permalloy thin films. Physical Review Research. https://doi.org/10.48550/arXiv.2209.10847.10.48550/arXiv.2209.10847 ↗
48. Moorthy, V.: Important factors influencing the magnetic Barkhausen noise profile. IEEE Trans. Magn. 52(4), 1–13 (2015)10.1109/TMAG.2015.2502222 ↗
49. P. Fagan, B. Ducharne, L. Daniel, and A. Skarlatos, “Magnetic Barkhausen noise: A simulation tool”, AIP Advances, 2021, https://doi.org/10.1063/9.0000095.10.1063/9.0000095 ↗
50. Bayramoglu, S., Gür, C.H., Alexandrov, I.V., Abramova, M.M.: Characterization of ultra-fine grained steel samples produced by high pressure torsion via magnetic Barkhausen noise analysis. Mater. Sci. Eng. A 527(4–5), 927–933 (2010). https://doi.org/10.1016/j.msea.2009.09.00610.1016/j.msea.2009.09.006 ↗
51. Gatelier-Rothea, C., Chicois, J., Fougeres, R., Fleischmann, P.: Characterization of pure iron and (130 p.p.m.) carbon-iron binary alloy by Barkhausen Noise measurements: influence of stress and microstructure. Acta Mater. 46, 4873–4882 (1998). https://doi.org/10.1016/S1359-6454(98)00205-510.1016/S1359-6454(98)00205-5 ↗
52. Kaplan, M., Gür, C.H., Erdogan, M.: Characterization of dual-phase steels using magnetic Barkhausen noise technique. J. Nondestr. Eval. 26, 79–87 (2007). https://doi.org/10.1007/s10921-007-0022-010.1007/s10921-007-0022-0 ↗