The Significance of In-Service Factors for the Visual Detectability of Impact Damage in Composite Airframe
Source abstract
Abstract
The inspection conditions may significantly affect the visual detectability of impact damage in aircraft composite skins. The goal of the present study was to identify the most affecting factors related to standard field control procedures and thus establish reasonable barely visible impact damage threshold in the frameworks of Irkut MC-21 aircraft certification. The probability of surface damage detection as a function of damage size was evaluated in relation to qualification of experts, paint color, viewing distance and surface contamination. The experiments with representative panels were carried out, the empirical detectability data was analyzed by methods of mathematical statistics. Using non-parametric tests the statistical significance of mentioned in-service factors was estimated. The bootstrap method was applied to make empirical data sufficiently representative. The minimum reliably detectable sizes of dents caused by 25 mm indenter for considered inspection conditions were identified. For detailed inspection in case of the clean surface the size of 0.3 mm can be accepted as a relevant criterion, in case of contamination this value can grow up to three times. For general inspection the values of 1 mm for clean and 1.7 mm for contaminated surface can be accepted conservatively. The obtained results were shown to be consistent with the literature and were recommended for use on the stages of design and maintenance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Industrial Vision Systems and Defect Detection · Advanced Measurement and Detection Methods · Thermography and Photoacoustic Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Advisory Circular 20-107B, Sept. 2009, Change 1. Federal Aviation Administration, Washington, DC (2010)
2. Horton, R., Whitehead, R.: Damage Tolerance of Composites—Final Report, Rept. AFWAL-TR-87-3030. Wright-Patterson AFB, OH (1988)
3. Kan, H.P., Cordero, R., and Whitehead, R.S.: Advanced Certification Methodology for Composite Structures, Rept. DOT/FAA/AR-96/111, 1997. Naval Air Warfare Center-Aircraft Division Department of the Navy, Patuxent River, MD10.21236/ADA326762 ↗
4. Tropis, A., Thomas, M., Bounie, J., Lafon, P.: Certification of the composite outer wing of the ATR72. Proc. Inst. Mech. Eng. Part G 209(4), 327–339 (1995). https://doi.org/10.1243/PIME_PROC_1995_209_307_0210.1243/PIME_PROC_1995_209_307_02 ↗
5. Fawcett, A.J., Oaks, G.D.: Boeing Composite Airframe Damage Tolerance and Service Experience, Workshop for Composite Damage Tolerance and Maintenance, Presentation #2 of Session 1. National Institute for Aviation Research, Chicago, IL (2006)
6. Morteau, E., Fualdes, C.: Composites at Airbus. Damage Tolerance Methodology, Workshop for Composite Damage Tolerance and Maintenance, Presentation #1 of Session 1. National Institute for Aviation Research, Chicago, IL (2006)
7. Spencer, F.W.: Visual Inspection Research Project Report on Benchmark Inspections. Technical Report No DOT/FAA/AR-96/65. U.S. Department of Transportation, Federal Aviation Administration, Washington, DC, USA (1996)
8. Erhart, D., Ostrom, L.T., Wilhelmsen, C.A.: Visual detectability of dents on a composite aircraft inspection specimen: an initial study. Int. J. Appl. Aviat. Stud. 4(2), 111–122 (2004)
9. Baaran, J.: Visual Inspection of Composite Structures, EASA-Research Project/2007/3 Final Report. Braunschweig, Germany (2009)
10. Cook, L., Boulic, A., Harris, D., Bellamy, P., Irving, P.E: Reliability of Damage Detection in Advanced Composite Aircraft Structures. CAA Paper 2013/03, West Sussex, UK (2013)
11. Dubinskii, S.V., Safonov, A.A.: Composite-friendly approach to certification of advanced materials and fabrication methods used in aviation industry. J. Mach. Manuf. Reliab. 46(5), 501–506 (2017). https://doi.org/10.3103/s105261881705004110.3103/s1052618817050041 ↗
12. Dubinskii, S., Senik, V., Feygenbaum, Y.: Field-survey-based evaluation of realistic and remote wing impact energy levels. J. Aircr. 55(6), 2307–2312 (2018). https://doi.org/10.2514/1.C03483610.2514/1.C034836 ↗
13. Dubinskii, S., Feygenbaum, Y., Senik, V., Metelkin, E.: A study of accidental impact scenarios for composite wing damage tolerance evaluation. Aeronaut. J. (2019). https://doi.org/10.1017/aer.2018.15210.1017/aer.2018.152 ↗
14. Feygenbaum, Y.M., Dubinskiy, S.V.: Reliability of composite skin defect visual detection during in-service inspections. Sci. Bull. GosNII GA 12, 68–80 (2016). (in Russian)
15. Feygenbaum, Y.M., Metelkin, E.S., Mikolaychuk, Y.A., Senik, V.Y., Dubinskiy, S.V., Gvozdev, S.A., Khlebnikova, I.G.: Experience and principal results of analytical and experimental studies focused on evaluation of composite skin defect visual detection reliability. Sci. Bull. GosNII GA 14, 75–89 (2016). (in Russian)
16. Russian National Standard, Lever-Gearing Measuring Heads. Specifications. GOST 18833-73 Moscow: Standard Publishing House, 1991 (in Russian)
17. Russian National Standard, Stands and Supports for Measuring Heads. Specifications. GOST 10197-62 Moscow: Standard Publishing House, 1986 (in Russian)
18. Seber, G., Lee, A.: Linear Regression Analysis, 2nd edn. Wiley, Hoboken (2012)
19. Fishman, G.S.: Monte Carlo: Concepts, Algorithms, and Applications. Springer, New York (1995)
20. Wright, S.J.: Coordinate descent algorithms. Math. Program. 151(1), 3–34 (2015). https://doi.org/10.1007/s10107-015-0892-310.1007/s10107-015-0892-3 ↗
21. Lawless, J.F.: Statistical Models and Methods for Lifetime Data, 2nd edn, pp. 478–481. Wiley, Hoboken (2003)
22. Himmelblau, D.M.: Process Analysis by Statistical Methods, p. 69. Wiley, New York (1970)
23. Grishin, A., Diogenov, S., Samoylov, I., Semin, A., Feygenbaum, Y., Halenkov, M.: Tu-204 family on air transportation market: major problems and opportunity of its maintenance. Sci. Bull. MSTU CA 163, 30–40 (2011). (in Russian)
24. Senik, V.Y., Khlebnikova, I.G., Fеygenbaum, Y.М., Metelkin, E.S.: Methodology of statistical processing of experimental data to assess the detectability of impact damage of composite material structure by visual inspection Sci. Bull. GosNII GA 14, 19–29 (2016). (in Russian)
25. Efron, B.: Bootstrap methods: another look at the jackknife. Ann. Stat. 7(1), 1–26 (1979)10.1214/aos/1176344552 ↗