journal article·2016-06

Fatigue Failure Process Characterization for Carbon Fiber Sheet Reinforced Steel Rods Using the Acoustic Emission Technique

Changhang Xu, Suping Ai, Jing Xie, Guoming Chen, Changji Li

Publisher page

Abstract

Acoustic emission (AE) technique is a widely used CM technique. In this paper, AE technique was used to characterize the fatigue failure process for carbon fiber sheet (CFS) reinforced steel rod. The AE signals at the frequency band of 50–400 kHz are detected by using AE sensors mounted on the steel rod and analyzed by both parameter analysis and spectrum analysis in order to investigate the feasibility of using the AE technique to identify various failure modes during fatigue failure process for CFS reinforced steel rods. Tension-tension fatigue experiments were carried out on both CFS reinforced and unreinforced steel rods. Based on AE energy parameter analysis using wavelet decomposition method, failure process was initially divided into three stages for unreinforced specimen and seven stages for CFS reinforced specimen. The frequency contents within the frequency band of 50–400 kHz for various failure modes in each stage including crack initiation, developing, final rupture in steel rod and matrix crack, debonding in CFS were revealed by fast Fourier transform (FFT) method. Further wavelet transform (WT) analysis was performed to illustrate the sequences of the failure modes and main failure mode in each stage by the occurrence time and longest duration time, respectively. This work indicates that the proposed method is promising for distinguishing failure stages qualitatively and identifying failure modes quantitatively in CFS reinforced steel rods.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Smart Materials for Construction · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Prenleloup, A., Gmür, T., Botsis, J., Papailiou, K.O.: Acoustic emission study and strength analysis of crimped steel-composite joints under traction. Compos. Struct. 74(3), 370–378 (2006)10.1016/j.compstruct.2005.04.017 ↗
2. Bhat, C., Bhat, M.R., Murthy, C.R.L.: Acoustic emission characterization of failure modes in composites with ANN. Compos. Struct. 61(3), 213–220 (2003)10.1016/S0263-8223(03)00068-0 ↗
3. Wadley, H.N.G., Scruby, C.B., Speake, J.H.: Acoustic emission for physical examination of metals. Int. Met. Rev. 25(1), 41–64 (1980)
4. Green, E.R.: Acoustic emission in composite laminates. J. Nondestruct. Eval. 17(3), 117–127 (1998)10.1023/A:1022654913517 ↗
5. Jiang, Y., Lee, C.H., Wu, J.: Crack damage recognition of a reinforced concrete beam using acoustic emission and non-linear independent component analysis. Insight-Non-Destruct. Test. Cond. Monit. 54(3), 155–1592 (2012)10.1784/insi.2012.54.3.155 ↗
6. Gholami, M., Sam, A.R.M., Yatim, J.M., Tahir, M.M.: A review on steel/CFRP strengthening systems focusing environmental performance. Constr. Build. Mater. 47, 301–310 (2013). doi: 10.1016/j.conbuildmat.2013.04.04910.1016/j.conbuildmat.2013.04.049 ↗
7. Teng, J.G., Yu, T., Fernando, D.: Strengthening of steel structures with ber-reinforced polymer composites. J. Constr. Steel Res. 78, 131–143 (2012). doi: 10.1016/j.jcsr.2012.06.01110.1016/j.jcsr.2012.06.011 ↗
8. Haedir, J., Zhao, X.L.: Analysis of CFRP externally-reinforced steel CHS tubular beams. Compos. Struct. 92(12), 2992–3001 (2010). doi: 10.1016/j.compstruct10.1016/j.compstruct.2010.05.012 ↗
9. Narmashiri, K., Ramli Sulong, N.H., Jumaat, M.Z.: Failure analysis and structural behaviour of CFRP strengthened steel I-beams. Constr. Build. Mater. 30, 1–9 (2012). doi: 10.1016/j.conbuildmat10.1016/j.conbuildmat.2011.11.009 ↗
10. Papanikos, P., Tserpes, K.I., Pantelakis, S.: Initiation and progression of composite patch debonding in adhesively repaired cracked metallic sheets. Compos. Struct. 81(2), 303–311 (2007). doi: 10.1016/j.compstruct.2006.08.02210.1016/j.compstruct.2006.08.022 ↗
11. Bocciarelli, M., Colombi, P.: Elasto-plastic debonding strength of tensile steel/CFRP joints. Eng. Fract. Mech. 85, 59–72 (2012). doi: 10.1016/j.engfracmech.2012.02.00810.1016/j.engfracmech.2012.02.008 ↗
12. Yu, Y.H., Choi, J.H., Kweon, J.H., Kim, D.H.: A study on the failure detection of composite materials using an acoustic emission. Compos. Struct. 75(1), 163–169 (2006)10.1016/j.compstruct.2006.04.070 ↗
13. Matta, F., Rizzo, P., Karbhari, V.M., Lanza di Scalea, F.: Acoustic emission damage assessment of steel CFRP bonds for rehabilitation. J. Compos. Constr. 10(3), 265–274 (2006)10.1061/(ASCE)1090-0268(2006)10:3(265) ↗
14. Lee, J.K., Lee, J.H.: Nondestructive evaluation on damage of carbon fiber sheet reinforced concrete. Compos. Struct. 58(1), 139–147 (2002). doi: 10.1016/S0263-8223(02)00029-610.1016/S0263-8223(02)00029-6 ↗
15. Degala, S., Rizzo, P., Ramanathan, K., Harries, K.A.: Acoustic emission monitoring of CFRP reinforced concrete slabs. Constr. Build. Mater. 23(5), 2016–2026 (2009). doi: 10.1016/j.conbuildmat.2008.08.02610.1016/j.conbuildmat.2008.08.026 ↗
16. Yun, H.D., Choi, W.C., Seo, S.Y.: Acoustic emission activities and damage evaluation of reinforced concrete beams strengthened with CFRP sheets. Ndt&E Int. 43(7), 615–628 (2010). doi: 10.1016/j.ndteint.2010.06.00610.1016/j.ndteint.2010.06.006 ↗
17. Chen, C., Kovacevic, R., Jandgric, D.: Wavelet transform analysis of acoustic emission in monitoring friction stir welding of 6061 aluminum. Int. J. Mach. Tools Manuf. 43(13), 1383–1390 (2003). doi: 10.1016/S0890-6955(03)00130-510.1016/S0890-6955(03)00130-5 ↗
18. Gutkin, R., Green, C.J., Vangrattanachai, S., Pinho, S.T., Robinson, P., Curtis, P.T.: On acoustic emission for failure investigation in CFRP: pattern recognition and peak frequency analyses. Mech. Syst. Signal Process. 25(4), 1393–1407 (2011)10.1016/j.ymssp.2010.11.014 ↗
19. Ni, Q.Q., Iwamoto, M.: Wavelet transform of acoustic emission signals in failure of model composites. Eng. Fract. Mech. 69(6), 717–728 (2002)10.1016/S0013-7944(01)00105-9 ↗
20. Sung, D.U., Kim, C.G., Hong, C.S.: Monitoring of impact damages in composite laminates using wavelet transform. Compos. B 33(1), 35–43 (2002). doi: 10.1016/S1359-8368(01)00051-810.1016/S1359-8368(01)00051-8 ↗
21. Qi, G., Barhorst, A., Hashemi, J., Kamala, G.: Discrete wavelet decomposition of acoustic emission signals from carbon-fiber-reinforced composites. Compos. Sci. Technol. 57(4), 389–403 (1997)10.1016/S0266-3538(96)00157-1 ↗
22. Ramirez-Jimenez, C.R., Papadakis, N., Reynolds, N., Gan, T.H., Purnell, P., Pharaoh, M.: Identification of failure modes in glass/polypropylene composites by means of the primary frequency content of the acoustic emission event. Compos. Sci. Technol. 64(12), 1819–1827 (2004). doi: 10.1016/j.compscitech.2004.01.00810.1016/j.compscitech.2004.01.008 ↗
23. De Groot, P.J., Wijnen, P.A.M., Janssen, R.B.F.: Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites. Compos. Sci. Technol. 55(4), 405–412 (1995). doi: 10.1016/0266-3538(95)00121-210.1016/0266-3538(95)00121-2 ↗
24. He, Y., Zhang, X., Friswell, M.I.: Observation of time-frequency characteristics of the acoustic emission from defects in rolling element bearings. Insight-Non-Destruct. Test. Cond. Monit. 52(8), 412–418 (2010)10.1784/insi.2010.52.8.412 ↗
25. Carlyle, J.M.: Acoustic emission signal analysis. Doctoral dissertation, University of Brunel (1982)
26. Harris, D.O., Bell, R.L.: The measurement and significance of energy in acoustic-emission testing. Exp. Mech. 17(9), 347–353 (1977). doi: 10.1007/BF0232632110.1007/BF02326321 ↗
27. Grosse, C.U., Reinhardt, H.W., Finck, F.: Signal-based acoustic emission techniques in civil engineering. J. Mater. Civil Eng. 15(3), 274–279 (2003). doi: 10.1061/(ASCE)0899-1561(2003)15:3(274)10.1061/(ASCE)0899-1561(2003)15:3(274) ↗
28. Parameswariah, C., Cox, M.: Frequency characteristics of wavelets. IEEE Trans. Power Deliv. 17(3), 800–804 (2002)10.1109/TPWRD.2002.1022806 ↗
29. Giordano, M., Calabro, A., Esposito, C., D’Amore, A., Nicolais, L.: An acoustic-emission characterization of the failure modes in polymer-composite materials. Compos. Sci. Technol. 58(12), 1923–1928 (1998). doi: 10.1016/S0266-3538(98)00013-X10.1016/S0266-3538(98)00013-X ↗
30. Grosskreutz, J.: The mechanisms of metal fatigue (II). Phys. Status Solidi B 47, 359–396 (1971)10.1002/pssb.2220470202 ↗
31. de Groot, P.J., Wijinen, P.A.M., Janssen, R.B.F.: Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon/epoxy composites. Compos. Sci. Technol. 55, 405–412 (1995)10.1016/0266-3538(95)00121-2 ↗
32. Dongsheng, L.I., Qian, H.U., Jinping, O.U., Hui, L.I.: Fatigue damage characterization of carbon fiber reinforced polymer bridge cables: wavelet transform analysis for clustering acoustic emission data. Sci. China 54(2), 379–387 (2011)10.1007/s11431-010-4198-7 ↗