Nondestructive Evaluation of Mechanical Properties of Femur Bone
Source abstract
Abstract
In a human body, the femur is one of the strongest and longest bones and commonly fractured bone shown in the last decades, especially in elderly humans. Common femur fractures are caused due to violent trauma and severe accidents. The complex structure and response of the bone under dynamic loading conditions will provide extensive information about the mechanical properties of the bone. In this work, we use a non-contact measurement technique using a Position sensing detector (PSD) to measure the natural frequencies and their corresponding mode shapes. The bone sample excited by the impact hammer, and its response is measured using PSD. Sequential measurements are taken on the sample and base; we take the transfer function of the sample with respect to base to measure the natural frequency of bone. Mechanical property such as elastic modulus of the bone is evaluated using measured natural frequencies, and compared with numerical results. The Modulus of elasticity of the bone is found to be 14.8 GPa. Modal analysis was carried to evaluate the natural frequencies and corresponding mode shapes. Numerical results are found to be within 9% of the experimentally measured results. Random vibration analysis was done to emulate the real-time testing for the bone sample. The measured spectrum follows the numerical data. This experimental technique will aid in the nondestructive evaluation of the mechanical properties of the bone sample. Further,this nondestructive technique can be extended for various biological specimens for calculating the mechanical response.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · Electrical and Bioimpedance Tomography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Gordan, R.S.: The structure and function of end of the femur. J. Bone Jt. Surg. Br. 43, 576–589 (1961)10.1302/0301-620X.43B3.576 ↗
2. Gautam, D., Rao, V.K.P.: Classification of diaphysis based on the mechanical response of femur bone. Vibroeng. Procedia 29, 182–188 (2019)10.21595/vp.2019.21133 ↗
3. Niva, M.H., Kiuru, M.J., Haataja, R., Pihlajamäki, H.K.: Fatigue injuries of the femur. J. Bone Jt. Surg. Br. 87(10), 1385–1390 (2005)10.1302/0301-620X.87B10.16666 ↗
4. Sivananthan, S., Sherry, E., Warnke, P., Miller, M. (eds.): Mercer’s Textbook of Orthopaedics and Trauma, 10th edn. CRC Press, Boca Raton (2012)
5. Manktelow, A.R.J., Haddad, F.S., Goddard, N.J.: Late lateral femoral condyle fracture after anterior cruciate ligament reconstruction. A case report. Am. J. Sports Med. 26(4), 587–590 (1998)10.1177/03635465980260042101 ↗
6. Cordey, J., Gautier, E.: Strain gauges used in the mechanical testing of bones. Part I: theoretical and technical aspects. Injury 30(Suppl 1), A7–A13 (1999)
7. Baroncelli, G.I.: Quantitative ultrasound methods to assess bone mineral status in children: technical characteristics, performance, and clinical application. Pediatr. Res. 63, 220–228 (2008)10.1203/PDR.0b013e318163a286 ↗
8. Katsamanis, F., Raftopoulos, D.D.: Determination of mechanical properties of human femoral cortical bone by the Hopkinson bar stress technique. J. Biomech. 23, 1173–1184 (1990)10.1016/0021-9290(90)90010-Z ↗
9. Lang, S.B.: Elastic coefficients of animal bone. J. Sci. 165, 287–288 (1969)
10. Espinoza, A.A., Deuerling, J.M., Landrigan, M.D., Renaud, J.E., Roeder, R.K.: Anatomic variation in the elastic anisotropy of cortical bone tissue in the human femur. J. Mech. Behav. Biomed. Mater. 2(3), 255–263 (2009)10.1016/j.jmbbm.2008.08.005 ↗
11. Granke, M., Grimal, Q., Saïed, A., Nauleau, P., Peyrin, F., Laugier, P.: Change in porosity is the major determinant of the variation of cortical bone elasticity at the millimeter scale in aged women. Bone 49(5), 1020–1026 (2011)10.1016/j.bone.2011.08.002 ↗
12. Ashman, R.B., Cowin, S.C., Van Buskirk, W.C., Rice, J.C.: A continuous wave technique for the measurement of the elastic properties of cortical bone. J. Biomech. 17(5), 349–361 (1984)10.1016/0021-9290(84)90029-0 ↗
13. Grimal, Q., Haupert, S., Mitton, D., Vastel, L., Laugier, P.: Assessment of cortical bone elasticity and strength: mechanical testing and ultrasound provide complementary data. Med. Eng. Phys. 31(9), 1140–1147 (2009)10.1016/j.medengphy.2009.07.011 ↗
14. Maynard, J.D.: The use of piezoelectric film and ultrasound resonance to determine the complete elastic tensor in one measurement. J. Acoust. Soc. Am. 91(3), 1754–1762 (1992)10.1121/1.402455 ↗
15. Migliori, A., Sarrao, J.L., Visscher, W.M., Bell, T.M., Lei, M., Fisk, Z., Leisure, R.G.: Resonant ultrasound spectroscopic techniques for measurement of the elastic moduli of solids. Physica B Condens. Matter 183(12), 1–24 (1993)10.1016/0921-4526(93)90048-B ↗
16. Kinney, J.H., Gladden, J.R., Marshall, G.W., Marshall, S.J., So, J.H., Maynard, J.D.: Resonant ultrasound spectroscopy measurements of the elastic constants of human dentin. J. Biomech. 37(4), 437–441 (2004)10.1016/j.jbiomech.2003.09.028 ↗
17. Lee, T., Lakes, R.S., Lal, A.: Investigation of bovine bone by resonant ultrasound spectroscopy and transmission ultrasound. Biomech. Model. Mechanobiol. 1(2), 165–175 (2002)10.1007/s10237-002-0015-y ↗
18. Migliori, A., Maynard, J.D.: Implementation of a modern resonant ultrasound spectroscopy system for the measurement of the elastic moduli of small solid specimens. Rev. Sci. Instrum. 76(12), 121–301 (2005)10.1063/1.2140494 ↗
19. Ulrich, T.J., McCall, K.R., Guyer, R.A.: Determination of elastic moduli of rock samples using resonant ultrasound spectroscopy. J. Acoust. Soc. Am. 111(4), 1667–1674 (2002)10.1121/1.1463447 ↗
20. Lebedev, A.V., Ostrovskii, L.A., Sutin, A.M., Soustova, I.A., Johnson, P.A.: Resonant acoustic spectroscopy at low Q factors. Acoust. Phys. 49(1), 81–87 (2003)10.1134/1.1537392 ↗
21. Bernard, S., Grimal, Q., Laugier, P.: Accurate measurement of cortical bone elasticity tensor with resonant ultrasound spectroscopy. J. Mech. Behav. Biomed. Mater. 18, 12–19 (2013)10.1016/j.jmbbm.2012.09.017 ↗
22. Daoui, H., Cai, X., Boubenider, F., Laugier, P., Grimal, Q.: Assessment of trabecular bone tissue elasticity with resonant ultrasound spectroscopy. J. Mech. Behav. Biomed. Mater. 74, 106–110 (2017)10.1016/j.jmbbm.2017.05.037 ↗
23. Granke, M., Grimal, Q., Saïed, A., Nauleau, P., Peyrin, F., Laugier, P.: Change in porosity is the major determinant of the variation of cortical bone elasticity at the millimeter scale in aged women. Bone 49(5), 1020–1026 (2011)10.1016/j.bone.2011.08.002 ↗
24. Bernard, S., Grimal, Q., Laugier, P.: Resonant ultrasound spectroscopy for viscoelastic characterization of anisotropic attenuative solid materials. J. Acoust. Soc. Am. 135(5), 2601–2613 (2014)10.1121/1.4869084 ↗
25. Balakirev, F.F., Ennaceur, S.M., Migliori, R.J., Maiorov, B., Migliori, A.: Resonant ultrasound spectroscopy: the essential toolbox. Rev. Sci. Instrum. 90(12), 121401 (2019)10.1063/1.5123165 ↗
26. Muller, M., et al.: Nonlinear ultrasound can detect accumulated damage in human bone. J. Biomech. 41(5), 1062–1068 (2008)10.1016/j.jbiomech.2007.12.004 ↗
27. Muller, M., et al.: Nonlinear resonant ultrasound spectroscopy (NRUS) applied to damage assessment in bone. J. Acoust. Soc. Am. 118(6), 3946–3952 (2005)10.1121/1.2126917 ↗
28. Ferry, B., Duclos, M., Burt, L., Therre, P., Franck, L.G., Jaffré, C., Courteix, D.: Bone geometry and strength adaptations to physical constraints inherent in different sports: comparison between elite female soccer players and swimmers. J. Bone Miner. Metab. 29, 342–351 (2011)10.1007/s00774-010-0226-8 ↗
29. Giudicessi, J.R., Michael, B.A., Ackerman, J.: NIH Public Access. Bone 23, 1–7 (2008)
30. Toljamo, P.S., Pulkkinen, P., Lammentausta, E., Tervonen, O., Jamsa, T., Nieminen, M.T.: Bone mineral density and geometry parameters determined in vitro from dual-energy digital radiography images in the assessment of bone maximal load of reindeer femora. Acta Radiol. 54, 961–965 (2003)10.1177/0284185113486372 ↗
31. Ott, S.M.: Cortical or trabecular bone: what’s the difference? Am. J. Nephr. 47(6), 373–376 (2018)10.1159/000489672 ↗
32. Terada, K., Kikuchi, N.: Nonlinear homogenization method for practical applications. Am. Soc. Mech. Eng. Appl. Mech. Div. AMD. 212, 1–16 (1995)
33. Kumar, K.C., et al.: Biomechanical Stress Analysis of a Human Femur Bone Using ANSYS. Mater. Today Proc. Elsevier Ltd. 2, 2115–2120 (2015)10.1016/j.matpr.2015.07.211 ↗
34. Viano, D.C.: Vibrational Characteristics of the embalmed human femur. Journal of sound and vibration 75(3), 417–436 (1981)10.1016/0022-460X(81)90387-4 ↗
35. Sabale, Abhijeet: Experimental Analysis of Femur Bone By Strain Gauge. Proceedings of 4th RIT Post Graduates Conference. 2581, 343–346 (2018)
36. Mathukumar, S., Nagarajan, V.A., Radhakrishnan, A.: Analysis and validation of femur bone data using finite element method under static load condition. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 233, 5547–5555 (2019)10.1177/0954406219856028 ↗
37. Nassar, A.A., Almudhaffar, M.A.: Vibration of bones: a case study on human femur. J. Eng. Sci. 14, 229–239 (2014)
38. Mughal, U.N., Khawaja, H.A., Moatamedi, M.: Finite element analysis of human femur bone. Int. J. Multiphys. 9, 101–108 (2015)10.1260/1750-9548.9.2.101 ↗
39. Taylor, W.R., Roland, E., Ploeg, H., Hertig, D., Klabunde, R., Warner, M.D., Hobatho, M.C., Rakotomanana, L., Clift, S.E.: Determination of orthotropic bone elastic constants using FEA and modal analysis. J. Biomech. 35, 767–773 (2002)10.1016/S0021-9290(02)00022-2 ↗
40. Keyak, J.H., Rossi, S.A.: Prediction of fracture location in the proximal femur using finite element models. Bone 23, 657–664 (2001)
41. Haider, I.T., Speirs, A.D., Hanspeter, F.: Effect of boundary conditions, impact loading and hydraulic stiffening on femoral fracture strength. J. Biomech. 46, 2115–2121 (2013)10.1016/j.jbiomech.2013.07.004 ↗
42. Miwa, S., Otsuka, T.: Practical use of imaging technique for management of bone and soft tissue tumors. J. Orthop. Sci. 22, 391–400 (2017)10.1016/j.jos.2017.01.006 ↗
43. Rajapakse, C.S., Farid, A.R., Kargilis, D.C., Jones, B.C., Lee, J.S., Johncola, A.J., Batzdorf, A.S., Shetye, S.S., Hast, M.W., Chang, G.: MRI-based assessment of proximal femur strength compared to mechanical testing. Bone 133, 115–227 (2020)10.1016/j.bone.2020.115227 ↗
44. Yegireddi, S., Ramana, S.V., Rao, P., Govinda, N.: Modelling and static analysis of femur bone by using different implant materials. IOSR J. Mech. Civ. Eng. 7, 82–91 (2013)10.9790/1684-0748291 ↗
45. Cairns, N.J., Adam, C.J., Pearcy, M.J., Smeathers, J.: 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 1600–1603 (2011)
46. Lv, B., Li, S.: Diagnosis study on sports injuries combined with medical imaging technology. Biomed. Res. 28, S118–S124 (2017)
47. Yousif, A.E., Aziz, M.Y.: Biomechanical analysis of the human femur bone during going upstairs and sitting down. In: 2012 1st Natl. Conf. Eng. Sci. FNCES, vol. 2012, pp. 1–7 (2012)10.1109/NCES.2012.6740472 ↗
48. Thomas, A.M., Luo, D.Z., Dunn, J.W.: Response of human femur to mechanical vibration. J. Biomed. Eng. 13(1), 58–60 (1991)10.1016/0141-5425(91)90045-9 ↗
49. Weiguo, B., Qin, L., Dichen, L., Jin, W., Weijie, Z., Zhongmin, J., Yusheng, Q.: Morphological characteristics of cartilage-bone transitional structures in the human knee joint and CAD design of an osteochondral scaffold. Biomed. Eng. Online 15, 1–14 (2016)10.1186/s12938-015-0119-0 ↗
50. Chau, F.S.: Effect of pressure on fluid damping in MEMS torsional resonators with flow ranging from continuum to molecular regime. Exp. Mech. 48, 91–106 (2008)10.1007/s11340-007-9076-2 ↗
51. Hobatho, M.C., Darmana, R., Barrau, J.J., Laroze, S., Morucci, J.P.: Natural frequency analysis of a human tibia. In: IEEE/Engineering Med. Biol. Soc. Annu. Conf., vol. 10, pp. 690–691 (1988)10.1109/IEMBS.1988.94933 ↗
52. Lowet, G., Van Audekercke, R., Van der Perre, G., Geusens, P., Dequeker, J., Lammens, J.: The relation between resonant frequencies and torsional stiffness of long bones in vitro. Validation of a simple beam model. J. Biomech. 26, 689–696 (1993)10.1016/0021-9290(93)90032-A ↗
53. Rho, J.Y.: An ultrasonic method for measuring the elastic properties of human tibial cortical and cancellous bone. Ultrasonics 34(8), 777–783 (1996)10.1016/S0041-624X(96)00078-9 ↗
54. Niebur, G.L., Feldstein, M.J., Yuen, J.C., Chen, T.J., Keaveny, T.M.: High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone. J. Biomech. 33(12), 1575–1583 (2000)10.1016/S0021-9290(00)00149-4 ↗
55. Hosseinzadeh, M., Ghoreishi, M., Narooei, K.: Investigation of hyperelastic models for nonlinear elastic behavior of demineralized and deproteinized bovine cortical femur bone. J. Mech. Behav. Biomed. Mater. 59, 393–403 (2016)10.1016/j.jmbbm.2016.02.027 ↗
56. Boskey, A.L., Coleman, R.: Critical reviews in oral biology & medicine: aging and bone. J. Dent. Res. 89, 1333–1348 (2010)10.1177/0022034510377791 ↗
57. Reza, S., Firooz, B.-N., Taha, G.: Vibrational analysis of human femur bone. In: Proc. ASME Des. Eng. Tech. Conf., vol. 8, pp. 1–8 (2018)
58. Kumar, P.B., Parhi Dayal, R.: Vibrational characterization of a human femur bone and its significance in the designing of artificial implants. World J. Eng. 14(3), 222–226 (2017)10.1108/WJE-07-2016-0033 ↗