Time Reversal Based Piezoelectric Transducer Self-diagnosis Under Varying Temperature
Source abstract
Abstract
Conventional structural health monitoring (SHM) studies using surface-mountable wafer-type piezoelectric transducers such as Lead Zirconate Titanate (PZT) mainly have focused on structural damage identification, but not so much on functionality of the PZT transducers although the transducers themselves could be often the weakest link in the entire system. In this study, piezoelectric transducer self-diagnosis schemes are developed based on a time reversal process and explicitly considering temperature effects. Several transducer self-diagnosis indices are proposed so that debonded and cracked PZT conditions can be identified and distinguished from temperature variation. First, the proposed self-diagnosis schemes are theoretically formulated, and then the effectiveness of the proposed schemes under varying temperature is verified through numerical simulations and experimental tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Thermography and Photoacoustic Techniques · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Moulin, E., Assaad, J., Delebarre, C., Kaczmarek, H., Balageas, D.: Piezoelectric transducer embedded in a composite plate: application to Lamb wave generation. J. Appl. Phys. 82(5), 2049–2055 (1997)10.1063/1.366015 ↗
2. Paget, C.A., Grondel, S., Levin, K., Delebarre, C.: Damage assessment in composites by Lamb waves and wavelet coefficients. Smart Mater. Struct. 12(3), 393–402 (2003)10.1088/0964-1726/12/3/310 ↗
3. Sohn, H., Park, G., Wait, J.R., Limback, N.P., Farrar, C.R.: Wavelet-based active sensing for delamination detection in composite structures. Smart Mater. Struct. 13(1), 153–160 (2004)10.1088/0964-1726/13/1/017 ↗
4. Kessler, S.S., Johnson, C.E., Dunn, C.T.: Experimental application of optimized Lamb wave actuating/sensing patches for health monitoring of composite structures. In: 4th International Workshop on Structural Health Monitoring, Stanford, CA, 15–17 September 2003, pp. 429–436 (2003)10.1117/12.499478 ↗
5. Sirohi, J., Chopra, I.: Fundamental understanding of piezoelectric strain sensors. J. Intell. Mater. Syst. Struct. 11(4), 246–257 (2000)10.1106/8BFB-GC8P-XQ47-YCQ0 ↗
6. Lee, S.J., Sohn, H.: Active self-sensing module for sensor diagnosis and structural health monitoring. In: 3rd European Workshop on Structural Health Monitoring, Granada, Spain, 5–7 July 2006
7. Park, G., Askin, A.C., Rutherford, A.C., Farrar, C.R.: Piezoelectric active-sensor failure identification using admittance measurements. In: 5th International Workshop on Structural Health Monitoring, Stanford, CA, 12–14 September 2005, pp. 1057–1064 (2006)
8. Giurgiutiu, V., Zagrai, A.: Damage detection in thin plates and aerospace structures with the electro-mechanical impedance method. Int. J. Struct. Health Monit. 4(2), 99–118 (2005)10.1177/1475921705049752 ↗
9. Park, G., Cudney, H., Inman, D.J.: Impedance-based health monitoring for civil structural components. J. Infrastruct. Syst., ASCE 6(4), 153–160 (2000)10.1061/(ASCE)1076-0342(2000)6:4(153) ↗
10. Bhalla, S., Soh, C.K.: Structural health monitoring by piezo-impedance transducers: II applications. J. Aerosp. Eng. 17(4), 166–175 (2004)10.1061/(ASCE)0893-1321(2004)17:4(166) ↗
11. Park, S., Ahmad, S., Yun, C.-B., Roh, Y.: Multiple crack detection of concrete structures using impedance-based structural health monitoring techniques. Exp. Mech. 46(5), 609–618 (2006)10.1007/s11340-006-8734-0 ↗
12. Sohn, H., Kim, S.B.: Development of dual PZT transducers for instantaneous crack detection in thin plate structures. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 57(1), 229–240 (2010)10.1109/TUFFC.2010.1401 ↗
13. Kim, S.B., Sohn, H.: Instantaneous reference-free crack detection based on polarization characteristics of piezoelectric materials. Smart Mater. Struct. 16(6), 2375–2387 (2007)10.1088/0964-1726/16/6/042 ↗
14. Dosch, J.J., Inman, D.J., Garcia, E.: A self-sensing piezoelectric actuator for collocated control. J. Intell. Mater. Syst. Struct. 3(1), 166–185 (1992)10.1177/1045389X9200300109 ↗
15. Cole, D.G., Clark, R.L.: Adaptive compensation of piezoelectric sensoriactuators. J. Intell. Mater. Syst. Struct. 5(5), 665–672 (1994)10.1177/1045389X9400500510 ↗
16. Vipperman, J.S., Clark, R.L.: Implementation of an adaptive piezoelectric sensoriactuator. AIAA J. 34(10), 2102–2109 (1996)10.2514/3.13358 ↗
17. Okugawa, M., Sasaki, M.: System identification and controller design of a self-sensing piezoelectric cantilever structure. J. Intell. Mater. Syst. Struct. 13(4), 241–252 (2002)10.1177/104538902761696823 ↗
18. Law, W.W., Liao, W.H., Huang, J.: Vibration control of structures with self-sensing piezoelectric actuators incorporating adaptive mechanisms. Smart Mater. Struct. 12(5), 720–730 (2003)10.1088/0964-1726/12/5/008 ↗
19. Neil, P.P.: Sensor failure estimators for detection filters. IEEE Trans. Automat. Control 37(10), 1553–1558 (1992)10.1109/9.256418 ↗
20. Guo, T.H., Musgrave, J.: Neural network based sensor validation for reusable rocket engines. In: IEEE American Control Conference, Seattle, WA, 21–23 June 1995, pp. 1367–1372 (1995)10.1109/ACC.1995.520974 ↗
21. Mehra, R., Rago, C., Seereeram, S.: Autonomous failure detection, identification and fault-tolerant estimation with aerospace applications. In: IEEE Aerospace Conference, Snowmass at Aspen, CO, 21–28 March 1998, pp. 133–138 (1998)10.1109/AERO.1998.687904 ↗
22. Gu, J., Meng, M., Cook, A., Faulkner, M.G.: Micro sensor based eye movement detection and neural network based sensor fusion and fault detection and recovery. In: IEEE 2000 Canadian Conference on Electrical and Computer Engineering, Halifax, Canada, 7–10 March 2000, pp. 518–522 (2000)10.1109/CCECE.2000.849763 ↗
23. Hashimoto, M., Kawashima, H., Nakagami, T., Oba, F.: Sensor fault detection and identification in dead-reckoning system of mobile robot: interacting multiple model approach. In: 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems, Maui, HI, 29 October–3 November 2001, pp. 1321–1326 (2001)10.1109/IROS.2001.977165 ↗
24. Rizzoni, G., Min, P.S.: Detection of sensor failures in automotive engines. IEEE Trans. Veh. Technol. 40(2), 487–500 (1991)10.1109/25.289431 ↗
25. Hwang, D.S., Peng, S.C., Hsu, P.L.: An integrated control/diagnostic system for a hard disk drive. IEEE Trans. Control. Syst. Technol. 2(4), 318–326 (1994)10.1109/87.338652 ↗
26. Yang, J.C.Y., Clarke, D.W.: A self-validating thermocouple. IEEE Trans. Control Syst. Technol. 5(2), 239–253 (1997)10.1109/87.556028 ↗
27. Lunze, J., Schroder, J.: Sensor and actuator fault diagnosis of systems with discrete inputs and outputs. IEEE Trans. Syst., Man Cybern., Part B, Cybern. 34(2), 1096–1107 (2004)10.1109/TSMCB.2003.820593 ↗
28. Friswell, M.J., Inman, D.J.: Sensor validation for smart structures. J. Intell. Mater. Syst. Struct. 10(12), 973–982 (1999)10.1106/GVD2-EGPN-C5B1-DPNX ↗
29. Saint-Pierre, N., Jayet, Y., Perrissin-Fabert, I., Baboux, J.C.: The influence of bonding defects on the electric impedance of piezoelectric embedded element. J. Phys. D: Appl. Phys. 29(12), 2976–2982 (1996)10.1088/0022-3727/29/12/006 ↗
30. Giurgiutiu, V., Zagrai, A., Bao, J.J.: Piezoelectric transducer embedded active sensors for aging aircraft structural health monitoring. Int. J. Struct. Health Monit. 1(1), 41–61 (2002)10.1177/147592170200100104 ↗
31. Park, G., Farrar, C.R., Lanza di Scalea, F., Coccia, S.: Self-diagnosis and validation of active sensors used for structural health monitoring. In: SPIE Smart Structures and Materials 2006: Smart Structures and Integrated Systems, San Diego, CA, 27 February–2 March 2006, pp. 493–501 (2006)10.1117/12.658813 ↗
32. Eckstein, B., Fritzen, C.P., Bach, M.: Advancements in self-diagnosis of bonded piezoelectric transducers. In: 4th European Workshop on Structural Health Monitoring, Cracow, Poland (2008)
33. Lee, S.J., Sohn, H.: Active self-sensing scheme development for structural health monitoring. Smart Mater. Struct. 15(6), 1734–1746 (2006)10.1088/0964-1726/15/6/028 ↗
34. Slayton, M.H., Angleton, P.A., Janicky, W.: Influence of elevated temperature on some piezoelectric materials. In: 1983 IEEE Ultrasonics Symposium, pp. 559–561 (1983)10.1109/ULTSYM.1983.198117 ↗
35. Liang, C., Sun, F.P., Rogers, C.A.: Coupled electro-mechanical analysis of adaptive material systems – determination of the actuator power consumption and system energy transfer. J. Intell. Mater. Syst. Struct. 5(4), 12–20 (1994)10.1177/1045389X9400500102 ↗
36. http://www.piezo.com/prodmaterialprop.html . Accessed 24 Nov. 2008
37. Fink, M., Cassereau, D., Derode, A., Prada, C., Roux, P., Tanter, M., Thomas, J.L., Wu, F.: Time-reversed acoustics. Rep. Prog. Phys. 63(12), 1933–1995 (2000)10.1088/0034-4885/63/12/202 ↗
38. Park, H.W., Kim, S.B., Sohn, H.: Understanding a time reversal process in Lamb wave propagations: theory. Wave Motion 46(7), 451–467 (2009)10.1016/j.wavemoti.2009.04.004 ↗
39. Tong, L., Sun, D., Atluri, S.N.: Sensing and actuating behaviours of piezoelectric layers with debonding in smart beams. Smart Mater. Struct. 10(4), 713–723 (2001)10.1088/0964-1726/10/4/315 ↗
40. Kim, S.D., In, C.W., Cronin, K.E., Sohn, H., Harries, K.: A reference-free NDT technique for debonding detection in CFRP strengthened RC structures. J. Struct. Eng., ASCE 133(8), 1080–1091 (2007)10.1061/(ASCE)0733-9445(2007)133:8(1080) ↗
41. Giurgiutiu, V., Lyshevski, S.E.: Micromechatronics Modeling, Analysis, and Design with MATLAB. CRC Press, Boca Raton (2003)10.1201/b12505 ↗
42. Raghavan, A., Cesnik, C.E.S.: Modeling of piezoelectric-based Lamb-wave generation and sensing for structural health monitoring. In: SPIE Symposium on Smart Structures & Materials/NDE, San Diego, CA, 15–18 March 2004, paper #5391-42 (2004)10.1117/12.540269 ↗
43. http://www.jahm.com/pages/property_list_mats.html#al . Accessed 24 Nov. 2008
44. Nguyen, C.H., Pietrzko, S., Buetikofer, R.: The influence of temperature and bonding thickness on the actuation of a cantilever beam by PZT patches. Smart Mater. Struct. 13(4), 851–860 (2004)10.1088/0964-1726/13/4/023 ↗
45. http://www.efunda.com/Materials/piezo/material_data/matdata_output.cfm?Material_ID=PZT-5A . Accessed 24 Nov. 2008
46. http://www.vallen.de/index.html . Accessed 24 Nov. 2008
47. Yu, L., Giurgiutiu, V.: In-situ optimized PWAS phased arrays for Lamb wave structural health monitoring. J. Mech. Mater. Struct. 2(3), 459–488 (2007)10.2140/jomms.2007.2.459 ↗