Effect of Shot Peening Parameters to Residual Stress Profiles and Barkhausen Noise
Source abstract
Abstract
The production of gear components includes numerous manufacturing operations which are carried out to ensure proper surface characteristics of components to deal with wear and fatigue. Surface shot peening is one way to increase the compressive residual stresses on the surface and thus ensure better wear and fatigue resistance. An experimental plan for shot peening was conducted to produce samples with varying surface characteristics. Residual stress profile and Barkhausen noise measurements were carried out for the samples. The objective of the study was to evaluate the interactions between the shot peening parameters studied, the residual stress profiles and the Barkhausen noise measurements. A multivariable regression analysis was applied for the task. Some remarkable correlations were found between the shot peening parameters, residual stress profile and Barkhausen noise features. The most important finding was that when the shot peening intensity was high enough, over 0.5 mmA, it dominated the shot peening coverage density parameter and thus no correlations could be gained. On the other hand, if the intensity parameter was lower than the limit of 0.5 mmA, the correlation between residual stress and Barkhausen noise measurements was remarkable. This means that the surface Barkhausen noise measurements could be used for the evaluation of the stress gradient in the shot peening process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced machining processes and optimization · Surface Treatment and Residual Stress · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Shaw, B.A., Ashby, R., Evans, J.T.: The Use of Controlled Post Heat Treatment Cleaning and Peening to Enhance the Fatigue Strength and Reliability of Case Carburized Gears (2000). https://doi.org/10.1361/cp2000ht004610.1361/cp2000ht0046 ↗
2. Canale, F.L.C., Totten, G.W.E., Mesquita, G.A.: Failure Analysis of Heat Treated Steel Components. ASM International (2008)10.31399/asm.tb.fahtsc.9781627082846 ↗
3. Kostilnik, T.: Surface Engineering: Shot Peening. In: ASM Handbook, vol. 5, pp. 126–135. ASM International (1994)10.31399/asm.hb.v05.a0001235 ↗
4. SAE Standard: J443- Procedures for Using Standard Shot Peening Test Strip (2003)
5. Kleber, X., Pirfo Barroso, S.: Investigation of shot-peened austenitic stainless steel 304L by means of magnetic Barkhausen noise. Mater. Sci. Eng. A. (2010). https://doi.org/10.1016/j.msea.2010.06.00810.1016/j.msea.2010.06.008 ↗
6. Chikazumi, S.: Physics of Magnetism. Wiley (1964)
7. Jiles, D.C.: Dynamics of domain magnetization and the Barkhausen effect. Czechoslov J. Phys. 50, 893–988 (2000)10.1023/A:1022846128461 ↗
8. Jiles, D.C.: Introduction to Magnetism and Magnetic Materials. Chapman and Hall, London (1991)10.1007/978-1-4615-3868-4 ↗
9. Cullity, B.D.: Introduction to Magnetic Materials. Addison-Wesley Publishing Company, Reading (1972)
10. Žagar, S., Žerovnik, P., Grum, J.: Surface layer analysis after shot peening by Barkhausen noise signal. In: The 10$$th$$th International Conference of the Slovenian Society for Non-destructive Testing, Application of Contemporary Non-Destructive Testing in Engineering (Ljubljana), pp. 539–548 (2009)
11. Alkaisee, R., Peng, R.L.: Influence of layer removal methods in residual stress profiling of a shot peened steel using X-ray diffraction. Adv. Mater. Res. (2014). https://doi.org/10.4028/www.scientific.net/AMR.996.17510.4028/www.scientific.net/AMR.996.175 ↗
12. Tiitto, K., Francino, P.: Testing shot peening stresses in the field. Shot Peen. 4(4), 1–2 (1991)
13. Suominen, L., Tiitto, K.: Evaluation of quality in shot peened components with Barkhausen noise. In: Ericson, T., Pluvinage, G., Castex, L. (eds.) MAT-TEC 93: Improvement of Materials, pp. 271–277. Detroit (1993)
14. Savaş, S., Gür, Ch.: Monitoring variation of surface residual stresses in shot peened steel components by the magnetic Barkhausen noise method. Insight. (2010). https://doi.org/10.1784/insi.2010.52.12.67210.1784/insi.2010.52.12.672 ↗
15. Marconi, P., Lauro, M., Bozzolo, W.: Shot Peening on pelton wheels: methods of control and results. In: 4th International Conference on Barkhausen Noise and Micromagnetic Testing, Italy, pp 151–158 (2003)10.1002/3527606580.ch18 ↗
16. SAE Standard: J2277—Shot Peening Coverage Determination (2013)
17. SFS Standard: SFS-EN15305, Non-destructive Testing—Test Method for Residual Stress Analysis by X-ray Diffraction (2008)
18. Noyan, I.C., Cohen, J.B.: Residual Stress Measurement by Diffraction and Interpretation. Springer, New York (1987). https://doi.org/10.1007/978-1-4613-9570-610.1007/978-1-4613-9570-6 ↗
19. Hauk, V.: Structural and Residual Stress Analysis by Nondestructive Methods. Elsevier, Amsterdam (1997). https://doi.org/10.1016/B978-044482476-9/50001-310.1016/B978-044482476-9/50001-3 ↗
20. Sorsa, A., et al.: Quantitative prediction of residual stress and hardness in case-hardened steel based on the Barkhausen noise measurement. NDT E Int. https://doi.org/10.1016/j.ndteint.2011.11.008 (2012)10.1016/j.ndteint.2011.11.008 ↗
21. Hays, W.L.: Statistics, 5th edn. Holt, Rinehart and Winston, Inc, New York (1994)
22. Guyon, I., Elisseeff, A.: An introduction to variable and feature selection. J. Mach. Learn Res. 3, 1157–1182 (2003)
23. Nakarivakul, S., Casacent, D.P.: An improvement on floating search algorithms for feature subset selection. Pattern Recogn. Lett. (2009). https://doi.org/10.1016/j.patcog.2008.11.01810.1016/j.patcog.2008.11.018 ↗
24. Moorthy, V., Shaw, BA., Evans, JT.: Evaluation of tempering induced changes in the hardness profile of case-carburised EN36 steel using magnetic Barkhausen noise analysis. NDT E Int. (2003). https://doi.org/10.1016/S0963-8695(02)00070-110.1016/S0963-8695(02)00070-1 ↗
25. Davut, K., Gür, Ch.: Monitoring the microstructural changes during tempering of quenched SAE 5140 steel by Magnetic Barkhausen noise. J. Nondestruct. Eval. (2007). https://doi.org/10.1007/s10921-007-0025-x10.1007/s10921-007-0025-x ↗
26. Stewart, D.M., Stevens, K.L., Kaiser, A.B.: Magnetic Barkhausen noise analysis of stress in steel. Curr. Appl. Phys. (2004). https://doi.org/10.1016/j.cap.2003.11.03510.1016/j.cap.2003.11.035 ↗
27. Karimian, N., et al.: Differential permeability behaviour of P9 and T22 power station steels. J. Magn. Magn. Mater. (2014). https://doi.org/10.1016/j.jmmm.2013.09.05910.1016/j.jmmm.2013.09.059 ↗
28. Poorna, C.K., et al.: Effects of grit blasting on surface properties of steel substrates. Mater. Des. (2009). https://doi.org/10.1016/j.matdes.2009.01.01410.1016/j.matdes.2009.01.014 ↗
29. Wojtas, A.: Surface and subsurface residual stresses after shot peening- their qualitative and quantitative analysis by X-ray diffraction and Barkhausen noise analysis. Met. Finish. News 5, 24–26 (2004)