Barkhausen Noise Probes and Modelling: A Review
Source abstract
Abstract
Abstract This review looks at the main types of magnetic Barkhausen noise (BN) probes that have been developed. The aim of this review is to summarize the existing knowledge of magnetic Barkhausen noise probes and the magnetic modelling of them. The BN probes have been the focus of many previous studies, but no sufficient review or conclusions have been made so far. This review focuses on combining information regarding the different types of BN probes and their modelling. The review is divided into two sections; in the first part the different designs and types of Barkhausen noise probes are introduced. The second part of the review deals with the BN probe modelling with various modelling software. Finally, a comparison of the experimental measurements is made and BN sensitivity is discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties and Applications · Magnetic Field Sensors Techniques · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Huang, H., Qian, Z.: Recent advances in magnetic non-destructive testing and the application of this technique to remanufacturing. Insight 60(8), 451–462 (2018)10.1784/insi.2018.60.8.451 ↗
2. Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts (2018) SAE International, Aerospace Recommended Practice, ARP4462
3. Holmberg, J., Lundin, P., Olavison, J., Sevim, S.: Non-destructive testing of surface characteristics after nitrocarburizing of three different steel grades. In: 12th International Conference on Barkhausen Noise and Micromagnetic Testing (ICBM12), 25–26 Sept 2017, Dresden (2017)
4. McNairnay, P.: Magnetic Barkhausen Noise Measurements Using Tetrapole Probe Designs, Master’s Thesis, Queen’s University, Kingston (2014)
5. Tomkovski, R. (ed.): The Barkhausen Noise Measurement Good Practice Guide. KTH Royal Institute of Technology, Stockholm (2018)
6. Durin, G., Zapperi, S.: The Barkhausen effect. In: Bertotti, G., Mauergoyz, I. (eds.) The Science of Hysteresis, vol. I–III, pp. 181–267. Elsevier, Amsterdam (2005)
7. Deveci, M.: Nondestructive Determination of Case Depth by Barkhausen Noise method, M.Sc. Thesis, Tampere University of Technology, Tampere (2016)
8. White, S.A.: A Barkhausen Noise Testing System for CANDU® Feeder Pipes, Ph.D. Thesis, Queen’s University, Kingston (2009)
9. Franco, F.A., Padovese, L.R.: NDT flaw mapping of steel surfaces by continuous magnetic Barkhausen noise: volumetric flaw detection case. NDT&E Int. 42, 721–729 (2009). https://doi.org/10.1016/j.ndteint.2009.06.00710.1016/j.ndteint.2009.06.007 ↗
10. Chikazumi, S.: Physics of Magnetism. Wiley, New York (1964)
11. Franco Grijalba, F.A., Padovese, L.R.: Non-destructive Flaw mapping of steel surfaces by the continuous magnetic Barkhausen noise method: detection of plastic deformation. J. Nondestruct. Eval. 37, 26 (2018). https://doi.org/10.1007/s10921-018-0480-610.1007/s10921-018-0480-6 ↗
12. https://www.stresstech.com/en-fi/products/barkhausen-noise-equipment/for-crankshafts/ . Accessed 7 Nov 2018
13. Moorthy, V.: Important factors influencing the magnetic Barkhausen noise profile. IEEE Trans. Magn. 52(4), 1–13 (2016). https://doi.org/10.1109/TMAG.2015.250222210.1109/TMAG.2015.2502222 ↗
14. Prabhu Gaunkar, N., Kypris, O., Nlebedim, I.C., Jiles, D.C.: Optimization of sensor design for Barkhausen noise measurement using finite element analysis. J. Appl. Phys. 115(1–4), 17E512 (2014). https://doi.org/10.1063/1.486443810.1063/1.4864438 ↗
15. Prabhu Gaunkar, N., Nlebedim, I., Jiles, D.C.: Approach for improving the sensitivity of Barkhausen noise sensors with applications to magnetic nondestructive testing. Mater. Eval. 10, 1377–1383 (2015)
16. Stupakov, A., Perevertov, O., Zablotskii, V.: A system for controllable magnetic measurements of hysteresis and Barkhausen noise. IEEE Trans. Instrum. Meas. 65(5), 1087–1097 (2016)10.1109/TIM.2015.2494621 ↗
17. Capó Sánchez, J., de Campos, J.M., Padovese, L.R.: Comparison between different experimental set-ups for measuring the magnetic Barkhausen noise in a deformed 1050 steel. J. Nondestruct. Eval. 36, 66 (2017)10.1007/s10921-017-0445-1 ↗
18. White, S., Krause, T., Clapham, L.: Control of flux in magnetic circuits for Barkhausen noise measurements. Meas. Sci. Technol. 18, 3501–3510 (2007). https://doi.org/10.1088/0957-0233/18/11/03410.1088/0957-0233/18/11/034 ↗
19. Vengrinovich, V., Tsukerman, V.: Stress and texture measurement using Barkhausen noise and angular scanning of driving magnetic field. In: 16th World Conference on Nondestructive Testing (16th WCNDT), Aug 30–Sept 3 2004, Montreal (2005)
20. Lo, C.C.H., Paulse, J.A., Jiles, D.C.: A magnetic imaging system for evaluation of material conditions using magnetoresistive devices. IEEE Trans. Magn. 39(5), 3453–3455 (2003)10.1109/TMAG.2003.816180 ↗
21. Stupakov, O.: Investigation of applicability of extrapolation method for sample field determination in single-yoke measuring setup. J. Magn. Magn. Mater. 302(2), 279–287 (2006)10.1016/j.jmmm.2006.04.015 ↗
22. Kazanci, E., Bekar, T., Iyiuyarlar, B., Pihava, E.G., Bicim, B.: Investigation of impact of autofrettage operation on thick walled steel tube. In: 12th International Conference on Barkhausen Noise and Micromagnetic Testing (ICBM12), 25–26 Sept 2017, Dresden (2017)
23. Kazanci, E., Iyiuyarlar, B., Pihava, E.G., Bicim, B.: Investigation of surface integrity of deep hole drilling of thick walled steel tube. In: 12th International Conference on Barkhausen Noise and Micromagnetic Testing (ICBM12), 25–26 Sept 2017, Dresden (2017)
24. McLyman, M.T.: Transformer and Inductor Design Handbook. Revised and Expanded, 3rd edn. Marcel Dekker, New York (2004)10.1201/9780203913598 ↗
25. Vértesy, G., Uchimoto, T., Takagi, T., Tomas, I.: Magnetic adaptive testing: influence of experimental conditions. In: Takahashi, S., Kikuchi, H. (eds.) Electromagnetic Nondestructive Evaluation (X). IOS Press, Amsterdam (2007)
26. Stupakov, O.: Stabilization of Barkhausen noise readings by controlling a surface field waveform. Meas. Sci. Technol. (2014). https://doi.org/10.1088/0957-0233/25/1/01560410.1088/0957-0233/25/1/015604 ↗
27. Tumanski, S.: Induction coil sensors—a review. Meas. Sci. Technol. 8, R31–R46 (2007). https://doi.org/10.1088/0957-0233/18/3/R0110.1088/0957-0233/18/3/R01 ↗
28. Stupakov, O., Palá, J., Takagi, T., Uchimoto, T.: Governing conditions of repeatable Barkhausen noise response. J. Magn. Magn. Mater. 321, 2956–2962 (2009)10.1016/j.jmmm.2009.04.065 ↗
29. Patel, H.V., Zurek, S., Meydan, T., Jiles, D.C., Li, L.: A new adaptive automated feedback system for Barkhausen signal measurement. Sens. Actuator A 129, 112–117 (2006)10.1016/j.sna.2005.11.026 ↗
30. Augustyniak, M., Augustyniak, B., Piotrowski, L., Chmielewski, M.: Determination of magnetisation conditions in a double-core Barkhausen noise measurement set-up. J. Nondestruct. Eval. 34, 16 (2015). https://doi.org/10.1007/s10921-015-0288-610.1007/s10921-015-0288-6 ↗
31. Augustyniak, B., Piotrowski, L., Chmielewski, M., Kosmas, K., Hristoforou, E.: Barkhausen noise properties measured by different methods for deformed Armco samples. IEEE Trans. Magn. 46(2), 544–547 (2010)10.1109/TMAG.2009.2033340 ↗
32. Yardley, V.A.: Magnetic Detection of Microstructure Change in Power Plant Steels, Ph.D. Thesis, University of Cambridge, UK, https://www.repository.cam.ac.uk/bitstream/handle/1810/221825/Yardley_thesis.pdf . Accessed 7 Nov 2018 (2003)
33. www.stresstech.com . Accessed 3 Aug 2018
34. Gabi, Y., Wolter, B., Kern, R., Conrad, C., Gerbershangen, A.: Simulation of electromagnetic inspection techniques using FEM analysis. In: 19th World Conference on Non-destructive Testing, 13–17 June 2016, Munich (2016)
35. Wolter, B., Szielasko, K., Tschuncky, R., Christian, C.: Micromagnetic testing at Fraunhofer IZFP: highlights and experiences of more than 3 decades of research. In: 12th International Conference on Barkhausen Noise and Micromagnetic Testing (ICBM12), 25–26 Sept 2017, Dresden (2017)
36. Tschuncky, E., Szielasko, K., Altpeter, I.: Hybrid Methods for Materials Characterization, Materials Characterization Using Nondestructive Evaluation (NDE) Methods, pp. 263–291. Woodhead Publishing, Sawstonm (2016). https://doi.org/10.1016/B978-0-08-100040-3.00009-210.1016/B978-0-08-100040-3.00009-2 ↗
37. http://iaph.bas-net.by/VDev/Introscan/introscane.html . Accessed 3 Aug 2018
38. http://www.qass.net/wp/products/qass-%C2%B5magnetic-hardness-testing/?lang=en . Accessed 3 Aug 2018
39. Xiucheng, X., Ruihuan, Z., Bin, W., Cunfu, H.: Quantitative prediction of surface hardness in 12CrMoV steel plate based on magnetic Barkhausen noise and tangential magnetic field measurements. J. Nondestr. Eval. 37, 38 (2018). https://doi.org/10.1007/s10921-018-0486-010.1007/s10921-018-0486-0 ↗
40. Garstka, T., Stefanik, A.: Modelling of the magnetic field in Barkhausen measurement method. In: 12th Scientific International Conference, Achievements in Mechanical and Materials Engineering AMME 2003, Gliwice–Zakopane, 7–10 Dec 2003, pp. 101–104 (2004)
41. Lasaosa, A., Gurruchaga, K., Garcia Navas, G., Martinez-de-Guerenu, A.: Characterisation of in-depth stress state by magnetic Barkhausen noise on machined steel acquiring different frequency bands. Adv. Mater. Res. 996, 373–379 (2014)10.4028/www.scientific.net/AMR.996.373 ↗
42. White, S., Krause, T.W., Clapham, L.: A multichannel magnetic flux controller for periodic magnetizing conditions. IEEE Trans. Instrum. Meas. 61(7), 1896–1907 (2012)10.1109/TIM.2011.2182261 ↗
43. Hamfelt, J., Gustafsson, J., van Deventer, J., Löfqvist, T., Häggström, F., Delsing, J.: A passive Barkhausen noise sensor for low-power application. In: IEEE International instrumentation and Measurement Technology Conference (I2MTC), 23–26 May 2016, Taipei. https://doi.org/10.1109/I2MTC.2016.7520374 (2016)10.1109/I2MTC.2016.7520374 ↗
44. Crouch, A.E., Beuker, T.: In-line stress measurement by the continuous Barkhausen method. In: IPC2004 International Pipeline Conference, 4–8 Oct 2004, Calgary (2004)10.1115/IPC2004-0233 ↗
45. Caldas-Morgan, M., Padovese, L.R.: Fast detection of the magnetic easy axis on steel sheet using the continuous rotational Barkhausen method. NDT&E Int. 45, 148–155 (2012)10.1016/j.ndteint.2011.10.003 ↗
46. Franco Grijalba, F.A., Padovese, L.R.: Non-destructive scanning for applied stress by the continuous magnetic Barkhausen noise method. J. Magn. Magn. Mater. 446, 231–238 (2018)10.1016/j.jmmm.2017.09.036 ↗
47. Hamfelt, J.: Evaluation of a New Barkhausen Noise Sensor, Master’s Thesis, Luleå University of Technology, Luleå (2015)
48. Katoh, M., Nishio, K., Yamaguchi, T.: FEM study on the influence of air gap and specimen thickness on the detectability of flaw in the yoke method. NDT&E Int. 33, 333–339 (2000)10.1016/S0963-8695(99)00060-2 ↗
49. Paľa, J., Bydžovský, J., Stupakov, O., Tomáš, I., Kadlecová, J., Jančárik, V.: Influence of yoke legs shape on air gap uncertainty. J. Electr. Eng. 57(8), 100–104 (2006)
50. Laitinen, A., Santa-aho, S., Lukinmaa, H., Suominen, L., Vippola, M.: Barkhausen noise Potcore sensor simulations with COMSOL. In: 12th International Conference on Barkhausen Noise and Micromagnetic Testing (ICBM12), 25–26 Sept 2017, Dresden (2017)
51. Hao, H.J., Yin, W., Strangwood, M., Peyton, A.J., Morris, P.J., Davis, C.J.: Modelling the electromagnetic response of two-phase steel microstructures. NDT&E Int. 43, 305–315 (2010)10.1016/j.ndteint.2010.01.006 ↗
52. Persson, G.: On the modelling of a Barkhausen noise sensor. In: 12th European Conference on Non-destructive Testing (12th ECNDT), 11–15 Jun 2018, Gothenburg (2018)
53. Laukkanen, M.: Magnetic field simulations of a Barkhausen noise sensor, Master’s Thesis, University of Jyväskylä, Finland (2005)
54. Hao, X.J., Yin, W., Strangwood, M., Peyton, A.J., Morris, P.J., Davis, C.J.: Characterization of decarburization of steels using a multifrequency electromagnetic sensor: experiment and modeling. Metall. Mater. Trans. A 40, 745–756 (2009)10.1007/s11661-008-9776-y ↗
55. Zhou, L., Davis, C., Kok, P., Van Der Berg, F.: Magnetic NDT for steel microstructure characterisation: modelling the effect of second phase distribution on magnetic relative permeability. In: 19th World Conference on Non-destructive Testing, 13–17 June 2016, Munich (2016)
56. Vengrinovich, V., Tsukerman, V., Denkevich, Y. Barkhausen effect based sensor and intellectual system for accurate stress measurements and monitoring in harsh environmental conditions. In: 15th World Conference on Nondestructive Testing, 15–21 October 2000, Rome (2000)
57. Blaow, M.M., Shaw, B.A.: Magnetic Barkhausen noise profile analysis: effect of excitation field strength and detection coil sensitivity in case carburized steel. Mater. Sci. Appl. 5, 258–266 (2014). https://doi.org/10.4236/msa.2014.5503010.4236/msa.2014.55030 ↗