The Potential of Guided Waves for Monitoring Large Areas of Metallic Aircraft Fuselage Structure
Source abstract
Abstract
The potential for long-range propagation of ultrasonic guided waves through metallic aircraft fuselage structure has been investigated using dispersion analysis and numerical modelling, validated by experiment. In order to satisfy the pressing need for integrated structural health monitoring of ageing metallic aircraft, it is likely that an active guided wave system based on current technology must feature efficient propagation over distances of at least 1m with an attenuation of not more than about 40dB/m. Propagation was examined across free skin, tapering skin, skin loaded with sealant and paint, double skin jointed with either sealant or adhesive, and lap and stringer joints, which together adequately characterise metallic monocoque fuselage construction. Whilst the simple and tapering skins allow long range propagation of non-dispersive modes with little reflection at the transition to tapering skin, the attenuation caused by application of a sealant layer generally leaves no viable modes. Guided wave propagation through double skin features the inevitable generation of twin modes with similar phase velocity, which interact with each other during propagation. This interaction crucially determines the efficiency of propagation across narrow joints and effectively precludes propagation across a succession of joints. This work leads to the conclusion that an active aircraft system that relies on guided wave propagation of more than 1m is not feasible, whereas localised guided wave monitoring of structurally significant areas is a more practical approach.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. NTSB 'Aviation Accident Report', NTSB\AAR-89/03, National Transport Safety Board, Washington USA, 1989.
2. J. M. Carlyle, 'Acoustic Emission Testing The F111', NDT international, 22(2):67-73, 1989.10.1016/0308-9126(89)90859-6 ↗
3. M. R. Gorman, 'Plate wave acoustic emission', Journal of the Acoustical Society of America, 90:358-364, 1991.10.1121/1.401258 ↗
4. W. B. Spillman, 'Sensing and processing for smart structures', Proceedings of the IEEE, 84(1):68-77, 1996.10.1109/5.476027 ↗
5. B. Culshaw, 'Smart structures activities worldwide', Proceedings of SPIE, 2717(2):3-17, 1996.
6. J. N. Kudva, C. Marantidis, and J. Gentry, 'Smart structures concepts for aircraft structural health monitoring', Smart structures and intelligent systems SPIE, 1917:964-971, 1993.
7. D. Alleyne, M. Lowe, and P. Cawley, 'The inspection of chemical plant pipework using Lamb waves: defect sensitivity and field experience', In: Annual review of progress in quantitative NDE, Thompson DO, Chimenti DE eds., New York, Plenum Press, 15:1859-1866, 1996.
8. T. H. G. Megson, 'Aircraft structures for engineering students', Edward Arnold, London, 1990 2nd ed.
9. B. Pavlakovic, M. Lowe, D. Alleyne, and P. Cawley, 'Disperse: a general purpose program for creating dispersion curves', In: Annual review of progress in quantitative NDE, Thompson DO, Chimenti DE eds., New York, Plenum Press, 16:155-192, 1997.
10. D. N. Alleyne, and P. Cawley, 'The interaction of Lamb waves with defects', IEEE transactions on ultrasonics, ferroelectics, and frequency control, 39(3):381-397, 1992.10.1109/58.143172 ↗
11. S. Rokhlin, 'Resonance phenomena of Lamb waves scattering by a finite crack in a solid layer', Journal of the American Ceramic Society, 69(4):922-928, 1981.
12. Y. Cho, D. D. Hongerholt, and J. L. Rose, 'Lamb Wave scattering analysis for reflector characterization', IEEE transactions on ultrasonics, ferroelectics, and frequency control, 44(1):44-51, 1997.10.1109/58.585189 ↗
13. P. D. Wilcox, R. P. Dalton, M. J. S. Lowe, and P. Cawley, 'Mode and transducer selection for long range Lamb wave inspection', In: Key Engineering Materials, Gilchrist MD, Dulieu-Barton JM, Worden K. eds., Aedermannsdorf, Trans Tech, 167–168:152-161, 1999.10.4028/www.scientific.net/KEM.167-168.152 ↗
14. D. N. Alleyne, and P. Cawley, 'Optimization of Lamb wave inspection techniques', NDT and E international, 25:11-22, 1992.10.1016/0963-8695(92)90003-Y ↗
15. P. M. Morse, 'Vibration and sound', McGraw Hill, New York, 1948.
16. D. Hitchings, 'FE77 user manual', Imperial College, London, 1995.
17. A. Guillet, M. Kettani, and F. Luppe, 'Guided waves' propagation in an elastic plate of linearly varying thickness', Journal of the Acoustical Society of America, 105(2):1340, 1999.10.1121/1.426357 ↗
18. R. P. Dalton, 'Propagation of Lamb Waves through metallic aircraft fuselage structure', PhD thesis, Mechanical Engineering, Imperial College of Science, Technology and Medicine, 2000.
19. D. Alleyne, and P. Cawley, 'A two-dimensional Fourier transform method for the measurement of propagating multimode signals', Journal of the Acoustical Society of America, 89(3):1159-1168, 1991.10.1121/1.400530 ↗
20. M. J. Evans, 'Design of a self-calibrating simulated acoustic emission source', Ultrasonics, 37:589-594, 2000.10.1016/S0041-624X(99)00110-9 ↗
21. M. Osborne, and S. Hart, 'Transmission, reflection, and guiding of an exponential pulse by a steel plate in water 1. Theory', Journal of the Acoustical Society of America, 17(1):1-18, 1945.10.1121/1.1916293 ↗
22. M. Osborne, and S. Hart, 'Transmission, reflection, and guiding of an exponential pulse by a steel plate in water 2. Experiment', Journal of the Acoustical Society of America, 18(1):170-184, 1946.10.1121/1.1916356 ↗
23. FAA 'Federal Aviation Administration—airframe handbook', US Department of Transportation, Washington, 1976 2nd ed.
24. G. A. Alers, and R. B. Thompson, 'Application of trapped modes in layered media to the testing of adhesive bonds', IEEE Ultrasonics Symposium, 1976, Annapolis, MD, pp. 138-143.10.1109/ULTSYM.1976.196650 ↗
25. A. K. Mal, P. C. Xu, and Y. Bar-Cohen, 'Analysis of leaky Lamb waves in bonded plates', International journal of engineering science, 27(7):779-791, 1989.10.1016/0020-7225(89)90045-1 ↗
26. S. Rokhlin, and F. Bendec, 'Coupling of Lamb waves with the aperture between two elastic sheets', Journal of the American Ceramic Society, 73(1):55-60, 1983.
27. S. I. Rokhlin, 'Lamb wave interaction with lap-shear adhesive joints: theory and experiment', Journal of the Acoustical Society of America, 89(6):2758-2765, 1991.10.1121/1.400715 ↗
28. Z. Chang, D. Guo, and A. K. Mal, 'Lamb Wave Propagation across a Lap Joint', In: Annual review of progress in quantitative NDE, Thompson DO, Chimenti DE eds., New York, Plenum Press, 15:185-191, 1996.
29. A. Mal, Z. Chang, D. Guo, and M. Gorman, 'Lap joint inspection using plate waves', Proceedings of SPIE, 2945:128-137, 1996.10.1117/12.259085 ↗
30. A. Pilarski, J. L. Rose, J. Ditri, D. Jiao, and K. Rajana, 'Lamb wave mode selection for increased sensitivity to interfacial weaknesses of adhesive bonds', In: Annual review of progress in quantitative NDE, Thompson DO, Chimenti DE eds., New York, Plenum Press, 12:1579-1585, 1993.
31. R. E. Challis, U. Bork, and P. C. D. Todd, 'Ultrasonic NDE of adhered T-joints using Lamb waves and intelligent signal processing', Ultrasonics, 34:445-459, 1996.
32. K. J. Sun, and P. H. Johnston, 'Mode conversions of Lamb waves for inspection of disbonds', IEEE Ultrasonics Symposium, 1992, pp. 763-766.10.1109/ULTSYM.1992.275898 ↗
33. K. J. Sun, and P. H. Johnston, 'Feasibility of using Lamb waves for corrosion detection in layered aluminium aircraft structures', IEEE Ultrasonics Symposium, 1993, pp. 733-736.10.1109/ULTSYM.1993.339517 ↗
34. K. J. Sun, and P. H. Johnston, 'Disbond detection in bonded aluminum joints using Lamb wave amplitude and time-of-flight', In: Annual review of progress in quantitative NDE, Thompson DO, Chimenti DE eds., New York, Plenum Press, 12:1507, 1993.
35. K. J. Sun, and P. H. Johnston, 'Effect of rivet rows on propagation of Lamb waves in mechanically fastened two-layer aluminum plates', In: Annual review of progress in quantitative NDE, Thompson DO, Chimenti DE eds., New York, Plenum Press, 14:1569-1575, 1995.
36. J. L. Rose, J. J. Ditri, D. Gallela, and T. Grant, 'Adhesive bond inspection utilizing ultrasonic Lamb waves', 15th Annual meeting of the adhesion society, 1992, Hilton Head SC, pp. 181-183.
37. M. J. S. Lowe, C. W. Chan, and R. E. Challis, 'The transmission of Lamb waves across adhesively bonded lap joints', Journal of the Acoustical Society of America, 107(3):1333-1345, 2000.10.1121/1.428420 ↗
38. B. A. Auld, 'Acoustic Fields and Waves in Solids', 1, Krieger Publishing Company, Florida, 1990.
39. R. B. Randall, 'Frequency Analysis', Bruel and Kjaer, Naerum, Denmark, 1987.
40. R. J. Blake, 'Numerical models of Rayleigh wave scattering from surface features', PhD thesis, Dept of Electronic and Electrical Eng, University of London (University College), 1988.
41. R. P. Dalton, 'Propagation of acoustic emission signals in metallic fuselage structure', JEE Proceedings—Science, Measurement and Technology, 2001 (in press).10.1049/ip-smt:20010467 ↗
42. M. K. Hinders, 'Lamb wave scattering from rivets', In: Annual review of progress in quantitative NDE, Thompson DO, Chimenti DE eds., New York, Plenum Press, 15:209-216, 1996.