Preparation methods and glass formation capabilities of aluminum-based amorphous alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (94)
Show source-provided references
1. Fabrication and In vitro biocompatibility evaluation of Zr48Cu36Al9Ag7 amorphous alloy scalpel10.1007/s12540-023-01622-4 ↗
2. Atomic level simulation of amorphous/nanocrystalline transition behavior in the Fe based amorphous alloys10.1016/j.jnoncrysol.2023.122726 ↗
3. A review of Fe-based amorphous and nanocrystalline alloys: preparations, applications, and effects of alloying elements
4. Formation and crystallization of Al-Fe-Si amorphous alloys10.1007/BF00551989 ↗
5. Physical metallurgy and mechanical properties of ductile ordered alloys (Fe, Co, Ni)3 V10.1179/imr.1984.29.1.168 ↗
6. Ductile aluminium-base amorphous alloys with two separate phases10.1007/BF01728983 ↗
7. Nanocrystalline aluminum bulk alloys with a high strength of 1420 MPa produced by the consolidation of amorphous powders10.1016/S1359-6462(01)00781-3 ↗
8. Aluminum-base amorphous and nanocrystalline materials10.1007/s11041-012-9417-3 ↗
9. Effect of W, Ni, and P addition on the glass-forming ability and properties of Fe-based amorphous alloys10.1016/j.jnoncrysol.2025.123704 ↗
10. The effect of Co addition on the enhanced amorphous forming ability and magnetocaloric properties of Gd55Ni30Al15 amorphous alloy10.1016/j.jnoncrysol.2024.122968 ↗
11. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
12. Exploration pathway of composition design of amorphous alloy coatings
13. Advances in synthesis and characterization of aluminum-based amorphous alloys: a review10.1002/adem.202301150 ↗
14. Underlying mechanism for the effects of composition and microstructure on the corrosion resistance of Al-based amorphous alloys: a review10.1080/10408436.2024.2311414 ↗
15. Sintered Nd-Fe-B magnets from gas-atomized powders and the effect of lubricants10.1016/j.jmmm.2024.172682 ↗
16. High-temperature oxidation behavior of gas-atomized CoCrFeNiCu high-entropy alloy powders10.1016/j.apsusc.2025.162561 ↗
17. Characterization of gas-atomized equiatomic Al Co Cr Fe Ni powder for additive manufacturing10.1007/s11661-023-07129-2 ↗
18. Centrifugal atomization and characterization of Fe-Si-B amorphous alloys10.3390/ma18030510 ↗
19. Flexible production of spherical powders of Ti-V-Zr-Nb-Mo-Hf-Ta-W refractory high-entropy alloys by plasma-assisted centrifugal atomization10.1002/admt.202401643 ↗
20. Magical spherical particles produced by centrifugal atomization10.1016/j.powtec.2024.120017 ↗
21. Processing and characterization of Ti Nb Mo Ta W refractory high entropy alloy by mechanical alloying10.1016/j.apt.2023.104276 ↗
22. Microstructure and mechanical properties of Cu-Ti alloy by mechanical alloying10.1080/00150193.2024.2322384 ↗
23. Wear behavior of CoCrFeNi high-entropy alloy prepared by mechanical alloying10.1016/j.jallcom.2024.177115 ↗
24. Amorphous/crystalline Zn60Zr40 alloys lattice structures with improved mechanical properties fabricated by mechanical alloying and selective laser melting10.1080/17452759.2023.2220549 ↗
25. Preparation of bulk amorphous alloy by suction casting with copper mold under non-vacuum melting condition
26. Sequential phase evolution of copper mold cast Al-Cu-Ni-(Zr) alloys: zirconium Micro-alloying results in ultrahigh hardness (∼5 GPa)10.1016/j.matchar.2025.115515 ↗
27. Microstructure evolution and magnetic properties of the Nd9Fe81-xTi4C2Nb4Bx (x=11, 13, 15) bulk magnets prepared by copper mold suction casting10.1016/S1002-0721(14)60529-9 ↗
28. Influence of Ca addition on microstructural evolution and mechanical properties of near-eutectic Mg–Li alloys by copper-mold suction casting10.1016/j.jallcom.2015.12.198 ↗
29. Melt fluxing to elevate the forming ability of Al-based bulk metallic glasses
30. Study on cavitation corrosion resistance of supersonic flame spraying WC-10Co4Cr coating on aero-engine fuel pump10.1007/s40799-024-00737-6 ↗
31. Effects of laser remelting on frictional properties of supersonic flame-sprayed coatings10.3390/coatings14030325 ↗
32. The effect of a coating sprayed using supersonic flame coating technology on the mechanical properties and interface structure of a thick steel/aluminum composite plate during hot rolling10.3390/met14040450 ↗
33. Stereometric structure of the surface of metal coatings sprayed by HVOF method on Al2O3 ceramic substrate
34. Effect of energy density on quality and properties of 18Ni300 laser clad layers by laser cladding10.2351/7.0001240 ↗
35. The inclined morphology and molten pool of laser cladding under different cladding methods10.1016/j.optlastec.2024.111445 ↗
36. Status of research on assisted laser cladding and laser cladding posttreatment: a review10.1134/S0031918X23602494 ↗
37. The effect of laser power on the microstructure and wear resistance of a Ni3Al-based alloy cladding layer deposited via laser cladding10.3390/coatings14030317 ↗
38. Influence of spray angle on scratch resistance of cold-sprayed SS316l deposits10.3390/ma18020431 ↗
39. A comprehensive investigation on precipitation, microstructure evolution and mechanical behavior of Inconel 718 superalloy fabricated by mechanically alloying and vacuum arc melting process
40. The effect of laser textured resin surface on the adhesion of supersonic plasma sprayed Al2O3/PF composite coating10.1016/j.surfcoat.2024.130990 ↗
41. Statistical and experimental study of effects of process parameters on Ti-6Al-4V coaxial wire-feed laser cladding10.1016/j.cjme.2025.100041 ↗
42. Investigation on the atomization mechanism of alloy powder by dual-gas nozzle and the powder defects formation
43. Comprehensive analysis of FeMn powder fabricated using ultrasonic atomization technique10.1016/j.powtec.2025.120725 ↗
44. Synthesis of Al-rich bulk metallic glass composites by warm extrusion of gas atomized powders10.1016/j.jallcom.2012.11.199 ↗
45. Sunflower-like eutectic solidification in gas atomized Al0.3CrFeNiTi0.3 medium-entropy alloy powders: a comprehensive microstructural study10.1016/j.msea.2024.146996 ↗
46. Effect of production parameters on cooling rates of AA2014 alloy powders produced by water jet cooled, rotating disc atomisation10.1179/003258903225008599 ↗
47. Centrifugal atomization of glass-forming alloy Al(86)Ni(8)Y(4.5)La(1.5)10.3390/ma15228159 ↗
48. Aluminum alloy based nanocomposites strengthened with amorphous AlNiTiZr phase10.2320/matertrans.MB201006 ↗
49. Mechanical behavior of bulk metallic glass prepared by copper mold casting with reversed pressure10.1016/j.jmatprotec.2016.06.023 ↗
50. Enhance magnetocaloric effects in Mn1.15Fe0.85P0.52Si0.45B0.03 alloy achieved by copper-mould casting and annealing treatments10.1016/j.jallcom.2015.07.141 ↗
51. Effect of pore characteristics on corrosion behavior of Al-based amorphous alloy coatings
52. In situ measurement of track shape in cold spray deposits10.1007/s11666-024-01826-z ↗
53. Corrosion behaviour of heat-treated cold spray nickel chromium/chromium carbides10.3390/met14101153 ↗
54. Cold spray deposition of high density polyethylene composite powders
55. Salt spray (Fog) corrosion behavior of cold-sprayed aluminum amorphous/nanocrystalline alloy coating10.1007/s11666-021-01309-5 ↗
56. Formation of Al-based amorphous/nanocrystalline coatings by cold spraying10.1016/j.surfcoat.2020.125644 ↗
57. Laser cladding Al-based amorphous-nanocrystalline composite coatings on AZ80 magnesium alloy under water cooling condition10.1016/j.jallcom.2016.08.082 ↗
58. Aluminum-based amorphous alloys and composites synthesized via powder metallurgy route: a review10.1007/s11106-025-00493-1 ↗
59. Under what conditions can a glass be formed?10.1080/00107516908204405 ↗
60. High strength bulk amorphous alloys with low critical cooling rates (Overview)10.2320/matertrans1989.36.866 ↗
61. Thermodynamic approach for determining chemical composition of Fe-Co based amorphous alloys with high thermal stability and glass forming ability10.1016/j.jallcom.2018.05.242 ↗
62. Glass formation criterion for various Glass-forming systems10.1103/PhysRevLett.91.115505 ↗
63. A new glass-forming ability criterion for bulk metallic glasses10.1016/S1359-6454(02)00166-0 ↗
64. Atomic size effect on the formability of metallic glasses10.1016/0022-3093(84)90210-2 ↗
65. Topological instability as a criterion for design and selection of easy glass-former compositions in Cu-Zr based systems10.2320/matertrans.MJ200745 ↗
66. Crystallization behavior and thermal stability of Al-Ni-RE metallic glasses10.7498/aps.62.136401 ↗
67. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
68. Glassy formation ability, magnetic properties and magnetocaloric effect in Al27Cu18Er55 amorphous ribbon10.1016/j.jmmm.2018.01.073 ↗
69. Synthesis and thermal stability of novel amorphous Al70Fe25Zr5 alloy prepared by mechanical alloying10.1179/174328408X353741 ↗
70. Formation and characterization of amorphous–nanocrystalline Al80Fe10M10 [M=Fe, Nb, Ti, Ni, (Ni0.5Ti0.5)] alloys10.1016/j.jallcom.2012.11.038 ↗
71. A brief overview of bulk metallic glasses10.1038/asiamat.2011.30 ↗
72. Bulk amorphous Al75V12.5Fe12.5-xCux alloys fabricated by consolidation of mechanically alloyed amorphous powders10.1016/j.jallcom.2013.10.099 ↗
73. Nucleation behavior of the primary FCC-Al phase in a Al86Ni10MM4 metallic glass10.1016/j.actamat.2025.120754 ↗
74. Evaluation of glass formation and critical casting diameter in Al-based metallic glasses10.1016/j.matdes.2015.08.138 ↗
75. Correlation between pre-peak in structure factor and physical properties in Al-based amorphous alloys10.1016/S1003-6326(11)60681-X ↗
76. Stability of Al-rich glasses in the Al-La-Ni system10.1016/j.intermet.2005.06.009 ↗
77. Aluminum-rich bulk metallic glasses10.1016/j.scriptamat.2008.08.003 ↗
78. Crystallization kinetics and consolidation of mechanically alloyed Al70Y16Ni10Co4 glassy powders10.1016/j.jallcom.2008.10.055 ↗
79. Developing aluminum-based bulk metallic glasses10.1080/14786435.2010.484401 ↗
80. Microstructure and corrosion resistance of an HVAF-sprayed Al-based amorphous coating on magnesium alloys10.3390/coatings12040425 ↗
81. Tailoring soft magnetic properties of Fe-Si-B-C-N-M amorphous/nanocrystalline alloys via trace transition metal elements
82. In situ Fe-rich particle reinforced Mg-based metallic glass matrix composites via dealloying in metallic melt10.1016/j.matlet.2020.129165 ↗
83. Focused ion-beam milling for field-ion specimen preparation:: preliminary investigations10.1016/S0304-3991(98)00058-8 ↗
84. Crystallization behaviour of Al-based metallic glasses below and above the glass-transition temperature10.1016/S0022-3093(02)01375-3 ↗
85. Corrosion and wear mechanisms of rare earth (Gd, Sc, Y)-doped Zr-based amorphous alloys10.1016/j.jmrt.2024.10.162 ↗
86. Femtosecond laser melting NbMoTaW refractory high entropy alloy: a micro-scale thermodynamic simulation10.1016/j.apsusc.2022.155997 ↗
87. High strength bulk amorphous alloys with low critical cooling rates (overview)10.2320/matertrans1989.36.866 ↗
88. Effects of replacing Ni by Co on the crystallization behaviors of Al–Ni–La amorphous alloys10.1016/j.intermet.2008.02.014 ↗
89. Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys10.2320/matertrans1989.41.1372 ↗
90. Glass-forming ability and thermal properties of Al(70)Fe(12.5)V(12.5)X(5)(X=Zr, Nb, Ni) amorphous alloys via Minor alloying additions
91. Relationship between the entropy of mixing, excess entropy and the shear viscosity of metallic glasses near the glass transition10.1016/j.intermet.2024.108478 ↗
92. Study on the magnetic induction effect of rare-earth La modified amorphous ribbons
93. Separating the role of mixing-entropy on the dynamics of glass-forming liquids10.1002/advs.202502568 ↗
94. Exploring the role of thermodynamic parameters in determining Zr-Cu-Al-Ag glass-forming composition10.1007/s11661-024-07339-2 ↗