Failure of multimode optical fibers nano-structured by near ablation threshold single-shot femtosecond laser procedure
Source abstract
Abstract
Abstract The present paper deals with the study of the failure probability of nano-structured optical fibers when submitted to uniaxial tensile loading. A nano-structuration procedure of optical fibers thanks to near ablation threshold single shot femtosecond laser has been proposed. The ablation threshold energy Ep0 for silica fiber is such that: NA2Ep0 = 15.5 nJ, where NA is the numerical aperture of the objective to focus the laser inside the fibers. The rupture strength of the impacted fibers can be controlled through the pulse energy Ep, the numerical aperture NA, the number N l of nano-craters depending on the step dz of the position of the fiber surface into the focal region, the interval dx between each crater and the number n l of flaw lines. An additive combination of two classical Weibull's laws allows a good representation of the failure probability of the impacted fibers. A phenomenological model for the evolutions of the Weibull's parameters (exponents and scaling stresses) has been proposed and the experimental tendencies of the failure probability curves are fairly well described by the set of the model's equations (Eq. (27) ).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Advanced Fiber Laser Technologies · Ocular and Laser Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Optical fibre damage detection for an aircraft composite leading edge10.1016/0010-4361(90)90100-B ↗
2. Low-coherence deformation sensors for the monitoring of civil-engineering structures10.1016/0924-4247(94)00797-7 ↗
3. Engineering development of optical fiber sensors for adverse environments10.1016/S0029-5493(96)01307-6 ↗
4. The mechanical behavior of optical fiber sensor embedded within the composite laminate
5. Health monitoring of a full composite tanks using long-gage fiber optic sensors
6. Residual strain development in an AS4/PPS thermoplastic composite measured using fibre Bragg grating sensors10.1016/j.compositesa.2005.02.016 ↗
7. Brilloin sensing cable design and experimental validation10.1109/JSEN.2008.926890 ↗
8. Single-valued strength of perfect silica fibers10.1063/1.93905 ↗
9. Strength and fatigue of silica optical fibers10.1109/50.50715 ↗
10. Optical fiber mechanical testing techniques
11. Fracture mechanics evaluation of optical fibers10.1016/S0254-0584(01)00578-8 ↗
12. Mechanical reliability of silica optical fibers10.1016/S0022-3093(02)01944-0 ↗
13. Effect of humidity of drawing environment on dynamic fatigue of polymer coated high strength silica optical fibers wire
14. Strength measurements of silica optical fibers under severe environment10.1016/j.optlastec.2005.06.027 ↗
15. New method for strength improvement of silica optical fibers10.1016/j.optlaseng.2007.10.005 ↗
16. Strength of silica optical fibers with micro size flaws10.1016/S0022-3093(01)00421-5 ↗
17. Femtosecond laser micromachining in transparent materials10.1038/nphoton.2008.47 ↗
18. Non-reciprocal ultrafast laser writing10.1038/nphoton.2007.276 ↗
19. Machining of submicron holes using a femtosecond laser at 800nm
20. Femtosecond optical breakdown in dielectrics10.1103/PhysRevLett.80.4076 ↗
21. Femtosecond laser aperturless near-field nanomachining of metals assisted by scanning probe microscopy10.1063/1.1555693 ↗
22. A study of the deterministic character of optical damage by femtosecond laser pulses and application to nanomachining10.1007/s00340-003-1246-z ↗
23. Dynamics of femtosecond laser interactions with dielectrics10.1007/s00339-004-2684-0 ↗
24. Direct-write subwave length structuring with femtosecond laser pulses10.1117/1.1904053 ↗
25. Ablation of solids by femtosecond lasers: ablation mechanism and ablation threshold for metals and dielectrics10.1063/1.1447555 ↗
26. Microscopic mechanisms of ablation and micromachining of dielectrics by using femtosecond lasers10.1063/1.1583857 ↗
27. Damage in materials following ablation by ultra-short laser pulses. A molecular dynamics study10.1103/PhysRevB.76.184119 ↗
28. Filamentation in Kerr media from pulsed Bessel beam10.1103/PhysRevA.77.043814 ↗
29. Morphology study of femtosecond laser nano-structured borosilicate glass using atomic force microscopy and scanning electron microscopy10.1016/j.optlaseng.2009.09.013 ↗
30. A detailed study through the focal region of near-threshold single-shot femtosecond laser ablation nano-holes in borosilicate glass10.1016/j.optcom.2011.08.037 ↗
31. Delobelle B., Développement d'une nouvelle génération de capteur à fibre optique pour le suivi de l'intégrité d'un réservoir de stockage d'hydrogène sous haute pression, Thesis FEMTO-ST Institute, Depart. of Applied Mech., Univ. of Besançon, France, 2009.
32. Femtosecond laser ablation of crystals Si02 and YAG10.1016/j.optcom.2007.01.079 ↗
33. A statistic theory of the strength of materials
34. A statistic distribution function of wide applicability10.1115/1.4010337 ↗
35. Strength of fiber optical waveguides10.1063/1.88435 ↗
36. Tensile strength and fatigue of optical fibers10.1063/1.322419 ↗
37. Strength of 0.04–50m lengths of coated fused silica fibers10.1063/1.88601 ↗
38. Application of fracture mechanics theory to fatigue failure of optical glass fibers10.1063/1.325508 ↗
39. Stresses in a plate to the presence of cracks and sharp corner
40. Is Weibull's modulus really a material constant ? Example case with interacting collinear cracks10.1016/j.ijsolstr.2005.08.002 ↗
41. Hybrid hydrogen storage vessel, a novel high pressure hydrogen storage vessel combined with hydrogen storage material
42. Laser-induced microexplosion confined in a bulk of silica: formation of nano-voids10.1063/1.2204847 ↗
43. Statistical approach to brittle fracture
44. Statistical approach in brittle fracture10.1007/BF00540858 ↗
45. Breakdown of diluted and hierarchical systems