Deformation and fracture behaviors of Zr-based metallic glasses under different constraint shear angles
Source abstract
Abstract
The deformation and fracture behaviors of Zr 35Ti 30Be 27.5Cu 7.5 metallic glasses (MGs) under different shear angles were systematically investigated via shear tests with different constraint shear angles of 30°, 45° and 60°. The fracture strength of the MGs subjected to constraint shear tests increases gradually with increasing shear angles. This positive relationship between the fracture strength and the applied shear angles was verified by the Mohr-Coulomb criterion, suggesting a good agreement between experimental results and theoretical predictions. Due to the large shear stress, the content of free volume generation is greater than the content of free volume annihilation in MGs with the small constraint shear angles and then, a large amount of free volume aggregates to form multiple shear bands, manifesting as a large number of serration events. The formation and interaction of multiple shear bands can prevent the shear bands from rapidly expanding into cracks, significantly improves the plasticity of MGs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Breakdown of avalanche critical behaviour in polycrystalline plasticity10.1038/nmat1393 ↗
2. Avalanches and scaling in plastic deformation10.1103/PhysRevLett.93.125502 ↗
3. Structural signature of plastic deformation in metallic glasses10.1103/PhysRevLett.106.135503 ↗
4. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
5. Fabrication of unmodified bionic copper surfaces with highly stable hydrophobicity and anti-icing properties via a transfer with Zr-based metallic glasses
6. Deformation of metallic glasses: recent developments in theory, simulations, and experiments10.1016/j.actamat.2016.01.049 ↗
7. Strain localization in amorphous metals10.1016/0001-6160(82)90225-5 ↗
8. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
9. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
10. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
11. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
12. Dynamics of shear-transformation zones in amorphous plasticity: formulation in terms of an effective disorder temperature10.1103/PhysRevE.70.041502 ↗
13. Correlation between β relaxation and selfdiffusion of the smallest constituting atoms in metallic glasses10.1103/PhysRevLett.109.095508 ↗
14. Calorimetric study of b-relaxation in an amorphous alloy: an experimental technique for measuring the activation energy for shear transformation10.1016/j.intermet.2013.09.002 ↗
15. Softening and dilatation in a single shear band10.1016/j.actamat.2011.04.047 ↗
16. Plastic flow and fracture of metallic glass10.1007/BF02642754 ↗
17. Softening caused by profuse shear banding in a bulk metallic glass10.1103/PhysRevLett.96.105503 ↗
18. Intrinsic versus extrinsic effects on serrated flow of bulk metallic glasses10.1016/j.intermet.2015.06.018 ↗
19. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
20. Flow serration in a Zr-based bulk metallic glass in compression at low strain rates10.1016/j.intermet.2008.03.007 ↗
21. Flow serration and shear-band propagation in bulk metallic glasses
22. Serrated flow and stick-slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass10.1016/j.actamat.2012.04.013 ↗
23. Self-organized intermittent plastic flow in bulk metallic glasses10.1016/j.actamat.2009.08.040 ↗
24. Propagation of shear bands in metallic glasses and transition from serrated to non-serrated plastic flow at low temperatures10.1016/j.actamat.2010.08.039 ↗
25. Tuning the mechanical performance of a Ti-based bulk metallic glass by pre-deformation10.1016/j.intermet.2010.06.006 ↗
26. Work-Hardenable” ductile bulk metallic glass10.1103/PhysRevLett.94.205501 ↗
27. Free volume evolution dominated by glass forming ability determining mechanical performance in ZrxTi65-xBe27.5Cu7.5 metallic glasses10.1016/j.msea.2021.140764 ↗
28. Co-ordination of randomly packed spheres10.1038/188910a0 ↗
29. A geometrical approach to the structure of liquids10.1038/183141a0 ↗
30. Suppression of the shear band instability during plastic flow of nanometer-scale confined metallic glasses10.1063/1.2821227 ↗
31. Ductile bulk metallic glass10.1103/PhysRevLett.93.255506 ↗
32. Super plastic bulk metallic glasses at room temperature10.1126/science.1136726 ↗
33. High-strength Cu-based bulk glassy alloys in Cu-Zr-Ti and Cu-Hf-Ti ternary systems10.1016/S1359-6454(01)00181-1 ↗
34. Dynamic response of a Pd40Ni40P20 bulk metallic glass in tension10.1016/S1359-6462(01)01193-9 ↗
35. The Mohr-Coulomb criterion from unit shear processes in metallic glass10.1016/j.intermet.2004.07.001 ↗
36. Size dependence of ductile to brittle transition of Zr-based metallic glasses under multiaxial loading10.1016/j.jmrt.2021.07.002 ↗
37. Rotation mechanism of shear fracture induced by high plasticity in Ti-based nano-structured composites containing ductile dendrites10.1016/j.scriptamat.2004.12.014 ↗
38. Shear band spacing under bending of Zr-based metallic glass plates10.1016/j.actamat.2004.01.034 ↗
39. Effects of hydrostatic pressure on the flow and fracture of a bulk amorphous metal10.1080/01418610208240453 ↗
40. Pressure-dependent flow behavior of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass10.1557/JMR.2003.0287 ↗
41. Quasi-static constitutive behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk amorphous alloys10.1016/0956-716X(94)90598-3 ↗
42. Effect of aspect ratio on the compressive deformation and fracture behaviour of Zr-based bulk metallic glass10.1080/09500830500395237 ↗
43. Spiral fracture in metallic glasses and its correlation with failure criterion10.1016/j.actamat.2015.08.008 ↗
44. A universal fracture criterion for high-strength materials10.1038/srep01117 ↗
45. Fracture of brittle metallic glasses: brittleness or plasticity10.1103/PhysRevLett.94.125510 ↗
46. Shear-transformation-zone theory of deformation in metallic glasses10.1016/j.scriptamat.2005.10.005 ↗
47. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
48. Strain localization in amorphous metals10.1016/0001-6160(82)90225-5 ↗
49. Shear fracture of bulk metallic glasses with controlled applied normal stresses10.1016/j.scriptamat.2008.02.042 ↗
50. Fracture mechanisms in bulk metallic glassy materials10.1103/PhysRevLett.91.045505 ↗
51. Shear band evolution related with thermal annealing revealing ductile-brittle transition of Zr35Ti30Be27.5Cu7.5 metallic glass under complex stress state10.1016/j.intermet.2021.107378 ↗
52. Test environments and mechanical properties of Zr-base bulk amorphous alloys10.1007/s11661-998-0004-6 ↗
53. Mechanical properties of Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix particulate composites10.1557/JMR.1999.0445 ↗
54. Fracture surface morphology of compressed bulk metallic glass-matrix-composites and bulk metallic glass10.1016/j.intermet.2006.01.017 ↗
55. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass10.1016/S1359-6454(02)00521-9 ↗
56. Dependence of ductile-brittle transition related with serrated flow on viscosity dominated by glass forming ability in ZrxTi65-xBe27.5Cu7.5 metallic glasses10.1016/j.msea.2021.141057 ↗
57. Fracture mechanisms in bulk metallic glassy materials10.1103/PhysRevLett.91.045505 ↗
58. Test environments and mechanical properties of Zr-base bulk amorphous alloys10.1007/s11661-998-0004-6 ↗
59. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass10.1016/S1359-6454(02)00521-9 ↗
60. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
61. Fracture morphology and quenched-in precipitates induced embrittlement in a Zr-base bulk glass10.2320/matertrans.42.356 ↗
62. Flow serration and shear-band propagation in bulk metallic glasses
63. Self-organized intermittent plastic flow in bulk metallic glasses10.1016/j.actamat.2009.08.040 ↗
64. Local temperature rises during mechanical testing of metallic glasses10.1557/jmr.2007.0068 ↗
65. Must shear bands be hot?10.1038/nmat1552 ↗
66. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
67. Localized heating and fracture criterion for bulk metallic glasses10.1557/jmr.2006.0124 ↗
68. Heat generation at the tip of a moving crack10.1016/0022-5096(78)90006-6 ↗
69. On the temperature distribution at the vicinity of dynamically propagating cracks in 4340 steel10.1016/0022-5096(91)90019-K ↗
70. Measurement of temperature field induced by dynamic crack growth in Beta-C titanium10.1007/BF00020077 ↗
71. Thermodynamics of Cu47Ti34Zr11Ni8, Zr52.5Cu17.9Ni14.6Al10Ti5 and Zr57Cu15.4Ni12.6Al10Nb5 bulk metallic glass forming alloys10.1063/1.372975 ↗
72. Tensile and fatigue fracture mechanisms of a Zr-based bulk metallic glass10.1557/JMR.2003.0058 ↗