The effect of substrate temperature on HW-CVD deposited a-SiGe:H films

Abstract Hydrogenated amorphous silicon germanium (a-SiGe:H) films were deposited using SiH4 and GeH4 mixture without H dilution by hot wire chemical vapor deposition (HW-CVD) technique. The electrical, optical and structural of these films are systematically studied as a function of substrate temperature (Tsub). The FTIR spectroscopic studies showed that a-SiGe:H films deposited at high Tsub contain H mainly the monohydride configuration whereas the films deposited at low Tsub has H in polyhydrides or (Si–H2)n complexes form. The low CH in a-SiGe:H films indicates that the growth of film is mainly from the atomic species evaporated from the hot filament and H gets incorporated in the film via gas phase reactions and substrate–gas interactions. Raman spectroscopic studies showed that the structural order of a-SiGe:H films improve with increase in Tsub. The T sub =300 ° C was found to be the optimized substrate temperature for the synthesis of device quality a-SiGe:H films.