Controlling the static quenching temperature to improve the corrosion resistance performance of Zr-based bulk metallic glass
Source abstract
Abstract
In this study, Zr 62.5 Cu 18.5 Fe 5 Al 10 Nb 4 bulk metallic glasses (BMGs) were prepared by static quenching at different temperatures. The results show that Zr 62.5 Cu 18.5 Fe 5 Al 10 Nb 4 BMGs prepared at high quenching temperature exhibit better corrosion resistance than those prepared at low quenching temperature. The structure of the Zr 62.5 Cu 18.5 Fe 5 Al 10 Nb 4 BMGs quenched at high temperature is amorphous, whereas the samples prepared at low quenching temperatures contain some nanocrystals. The correlation between the corrosion resistance and the underlying structure of the Zr 62.5 Cu 18.5 Fe 5 Al 10 Nb 4 BMGs at different quenching temperatures was studied, and the corrosion mechanism in a sodium chloride solution was analyzed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. The elastic properties, elastic models and elastic perspectives of metallic glasses10.1016/j.pmatsci.2011.07.001 ↗
2. Cobalt-based bulk glassy alloy with ultrahigh strength and soft magnetic properties10.1038/nmat982 ↗
3. Ternary Co-W-B bulk metallic glasses with ultrahigh strength10.1016/j.jnoncrysol.2020.120194 ↗
4. Corrosion resistant Cr-based bulk metallic glasses with high strength and hardness10.1016/j.jnoncrysol.2014.12.006 ↗
5. Wear resistance of Zr-based bulk metallic glass applied in bearing rollers10.1016/S0921-5093(04)00973-6 ↗
6. Corrosion behavior of Cr-based bulk metallic glasses in hydrochloric acid solutions10.1016/j.corsci.2016.02.026 ↗
7. Design and performance of a high-speed permanent magnet generator with amorphous alloy magnetic core for aerospace applications10.1109/TIE.2019.2905806 ↗
8. Microstructure and thermal conductivity of wire-arc sprayed FeCrNbBSiC amorphous coating10.1016/j.jallcom.2019.02.275 ↗
9. Spiral-shape fast-moving soft robots10.1002/adfm.202300516 ↗
10. Effects of Mo on the glass forming ability and properties of Fe-B-C-P-Si-Mo bulk metallic glasses
11. Glass formation and soft magnetic properties of novel Fe-rich Fe-B-Ti-Zr bulk metallic glasses10.1016/j.jallcom.2018.01.074 ↗
12. Linking the thermal characteristics and mechanical properties of Fe-based bulk metallic glasses10.1016/j.jallcom.2015.12.196 ↗
13. Ultra-high strength above 5000 MPa and soft magnetic properties of Co–Fe–Ta–B bulk glassy alloys10.1016/j.actamat.2003.12.008 ↗
14. Formation and ultrahigh mechanical strength of multicomponent Co-based bulk glassy alloys10.1016/j.jmrt.2023.07.255 ↗
15. The effects of tantalum addition on the glass forming ability, thermal stability, and mechanical properties of Ni-Co-W-B bulk metallic glasses
16. Preparation of Ni-based bulk metallic glasses with high corrosion resistance10.1016/j.jnoncrysol.2016.04.020 ↗
17. Structure, thermal stability and mechanical properties of Zr65Al7.5Ni10Cu17.5 glassy alloy rod with a diameter of 16 mm produced by tilt casting10.2320/matertrans.MER2008127 ↗
18. Unusual compressive plasticity of a centimeter-diameter Zr-based bulk metallic glass with high Zr content10.1016/j.jallcom.2010.02.069 ↗
19. Optimizing structural ordering degree to improve the mechanical reliability of metallic glasses10.1016/j.jmst.2024.12.024 ↗
20. Intrinsic mechanisms influencing the tensile fracture reliability of CuZr-based amorphous microwires10.1007/s12598-024-03129-2 ↗
21. High stability and high corrosion resistance of a class of Co–Cr–Mo–Nb–B high-entropy metallic glasses10.1016/j.jmrt.2024.03.035 ↗
22. Preparation and properties of ultra-high hardness Co-Cr-Mo-Nb-B high-temperature amorphous alloy coating10.1016/j.surfcoat.2024.131474 ↗
23. Effect of Ti addition on mechanical properties and corrosion resistance of Ni-free Zr-based bulk metallic glasses for potential biomedical applications10.1016/j.jallcom.2019.152636 ↗
24. Effect of alloying elements on the microstructure and corrosion behavior of TiZr-based bulk metallic glasses
25. Effect of surface finishing of a Zr-based bulk metallic glass on its corrosion behaviour10.1016/j.corsci.2010.01.027 ↗
26. Influence of the molten quenching temperature on the thermal physical behavior of quenched Zr-based metallic glasses10.1016/j.intermet.2013.02.004 ↗
27. Relaxation behavior in metallic glasses and related mechanisms by simulation method: a brief review
28. Effects of melt temperatures on the structure relaxation and compressive plasticity of La62Al14(Cu5/6Ag1/6)14(Ni1/2Co1/2)10 bulk metallic glass10.1016/j.jnoncrysol.2017.05.036 ↗
29. The improvement of the plasticity of a Zr-Ni-Al bulk metallic glass by static quenching10.1016/j.msea.2022.143624 ↗
30. Corrosion mechanisms of Zr-based bulk metallic glass in NaF and NaCl solutions10.1016/j.jmst.2019.10.043 ↗
31. Corrosion resistance enhancement of bulk metallic glass through ultrasonic vibrations10.1016/j.jnoncrysol.2024.123223 ↗
32. On the corrosion mechanism of Mg investigated by electrochemical impedance spectroscopy10.1016/j.electacta.2019.03.080 ↗
33. Electrochemical and chemical corrosion behaviors of the in-situ Zr-based metallic glass matrix composites in chloride-containing solutions10.1016/j.jallcom.2018.08.174 ↗
34. Liquid-liquid transition and inherited signatures in Zr-Cu-Ni-Al metallic glasses10.1016/j.jnoncrysol.2022.122029 ↗
35. Mechanical properties of Cu46Zr46Al8 metallic glasses affected by liquid-liquid phase transition10.1016/j.jnoncrysol.2024.122906 ↗
36. Correlation between enthalpy change and free volume reduction during structural relaxation of Zr55Cu30Al10Ni5 metallic glass10.1016/j.scriptamat.2003.09.038 ↗