Glass forming ability of Zr48Cu36Al16-xAgx alloys determined by three different methods
Source abstract
Abstract
Abstract This work was focused on the glass forming ability (GFA) of Zr48Cu36Al16-xAgx alloys (x = 0, 2, … 16) examination using three different methods. Critical diameters were determined by both discrete (classic) and continuous (cone test) methods. Several commonly used GFA thermal indicators were investigated as well. Due to oxygen contamination strong influence on the GFA of Zr-based alloys, oxygen content was measured in each prepared alloy by inert gas fusion method. Additionally, the authors discussed the alloy composition influence on the critical diameters and their respective thermal indicators values. These values were compared and their correlation with critical diameters was evaluated in terms of R2 correlation coefficient values. The best correlation was calculated for the θ indicator (R2 = 0.979).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Nanoporous metals and alloys · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Under what conditions can a glass be formed?10.1080/00107516908204405 ↗
2. Influence of low oxygen contents and alloy refinement on the glass forming ability of Zr52.5Cu17.9Ni14.6Al10Ti510.2320/matertrans.43.3206 ↗
3. Glass forming ability of the Zr50Cu40Al10 alloy with two oxygen levels10.1016/j.jnoncrysol.2018.05.034 ↗
4. Relation of various GFA indicators to the critical diameter of Zr-based BMGs10.1016/j.jallcom.2014.11.112 ↗
5. A new correlation between the characteristics temperature and glass-forming ability for bulk metallic glasses10.1007/s10973-018-7050-0 ↗
6. Mg-Cu-Y amorphous alloys with high mechanical strengths produced by a metallic mold casting method10.2320/matertrans1989.32.609 ↗
7. The correlation between reduced glass transition temperature and glass forming ability of bulk metallic glasses10.1016/S1359-6462(99)00417-0 ↗
8. A new glass-forming ability criterion for bulk metallic glasses10.1016/S1359-6454(02)00166-0 ↗
9. Influence of beryllium on thermal stability and glass-forming ability of Zr-Al-Ni-Cu bulk amorphous alloys10.1016/j.jallcom.2004.01.014 ↗
10. On the parameters to assess the glass forming ability of liquids10.1016/j.jnoncrysol.2005.03.006 ↗
11. A new criterion for evaluating the glass-forming ability of bulk metallic glasses10.1016/j.msea.2006.06.053 ↗
12. New criterion of glass forming ability for bulk metallic glasses10.1063/1.2718286 ↗
13. A new criterion for the glass-forming ability of liquids10.1016/j.jnoncrysol.2006.08.049 ↗
14. New criterion in predicting glass forming ability of various glass-forming systems10.1088/1674-1056/17/1/043 ↗
15. A new criterion for evaluating the glass-forming ability of bulk glass forming alloys10.1016/j.jallcom.2007.05.037 ↗
16. On the new criterion to assess the glass-forming ability of metallic alloys10.1016/j.msea.2009.01.063 ↗
17. A thermodynamic approach to assess glass-forming ability of bulk metallic glasses10.1016/S1003-6326(08)60438-0 ↗
18. A criterion for evaluating glass-forming ability of alloys
19. Correlations between viscosity and glass-forming ability in bulk amorphous alloys10.7498/aps.58.2556 ↗
20. New glass forming ability criterion derived from cooling consideration10.1016/j.intermet.2010.06.012 ↗
21. A new criterion for predicting glass forming ability of bulk metallic glasses and some critical discussions10.1016/S1002-0071(12)60051-3 ↗
22. Evolution of glass forming ability indicator by genetic programming10.1016/j.commatsci.2016.02.037 ↗
23. Which glass stability criterion is the best?10.1016/j.tca.2011.05.011 ↗
24. Evaluation of glass- forming ability criterion from phase-transformation kinetics10.1016/j.jnoncrysol.2012.05.019 ↗
25. Recent progress in criterions for glass forming ability10.1016/S1003-6326(08)60232-0 ↗
26. Synthesis of centimeter-size Ag-doped Zr-Cu-Al metallic glasses with large plasticity10.1016/j.jallcom.2006.06.088 ↗
27. Zr-(Cu,Ag)-Al bulk metallic glasses10.1016/j.actamat.2007.12.030 ↗
28. A plastic Zr–Cu–Ag–Al bulk metallic glass10.1016/j.actamat.2010.10.034 ↗
29. New Cu-Zr-based bulk metallic glasses with large diameters of up to 1.5 cm10.1016/j.scriptamat.2006.06.024 ↗
30. Influence of Ag and Co additions on glass-forming ability, thermal and mechanical properties of Cu-Zr-Al bulk metallic glasses10.1016/j.msea.2016.06.081 ↗
31. Glass-forming ability and differences in the crystallization behaviour of ribbons and rods of Cu36Zr48Al8Ag8 bulk glass-forming alloy10.1557/jmr.2009.0219 ↗
32. Glass forming ability and corrosion resistance of Zr-Cu-Ni-Al-Ag bulk metallic glass10.3390/met6100230 ↗
33. Synthesis and properties of Cu-Zr-Ag-Al glassy alloys with high glass-forming ability10.1016/j.mseb.2007.09.064 ↗
34. Characteristics of slowly cooled Zr-Al-Cu-Ni bulk samples with different oxygen content10.4028/www.scientific.net/MSF.269-272.797 ↗
35. Influence of oxygen on the devitrification of Zr-Ti-Nb-Cu-Ni-Al metallic glasses10.1016/j.msea.2006.02.315 ↗
36. Roles of minor additions in formation and properties of bulk metallic glasses10.1016/j.pmatsci.2006.07.003 ↗
37. Effect of Zr purity and oxygen content on the structure and mechanical properties of melt-spun and suction-cast Cu46Zr42Al7Y5 alloy10.1515/amm-2016-0201 ↗
38. Difference in crystallization kinetics of Zr41Ti14Cu12.5Ni10Be22.5 bulk metallic glass under different oxidizing environments10.1016/j.intermet.2004.04.025 ↗
39. Zirconium purity influence on the critical diameter and thermal indicators of the Zr48Cu36Al9Ag7 alloy10.1016/j.jnoncrysol.2019.01.026 ↗
40. Toughness of Zr55Cu30Al10Ni5 bulk metallic glass for two oxygen levels10.1016/j.jnoncrysol.2006.02.102 ↗
41. Effect of oxygen concentration upon the ductility of amorphous Zr57NbbAl10Cu15.4Ni12.610.1016/j.msea.2005.12.009 ↗
42. Understanding the mechanism for the embrittlement of a monolithic Zr-based bulk metallic glass by oxygen10.1016/j.intermet.2009.01.011 ↗
43. Synthesis of impurity-insensitive Zr-based bulk metallic glass10.1016/j.jnoncrysol.2015.11.026 ↗
44. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗