journal article·2018-05

Universal percolation threshold for ductile-brittle transition of amorphous alloys

Zhihai Ping, Ming Zhong, Zhilin Long, Xiaojin Xu, Guangkai Liao, Heng Chen

Publisher page

Abstract

Abstract Based on the free volume, shear transformation zone and percolation theory, a new percolation model has been established to investigate the ductile-brittle transition in amorphous alloys. Taking the binary Cu25Zr75 amorphous alloy for example, the influence of the free volume concentration and flow unit dispersity on its percolation threshold value was analyzed. The results show that the concentration of flow units reach a critical value when the ductile-brittle transition occurs in the Cu25Zr75 amorphous alloy, and this critical value is independent of the concentration of the free volume but dependent on the dispersity of flow units. Furthermore, the percolation threshold values of La-, Zr-, Cu-, Pd-, Fe-, Sr- and Tm-based amorphous alloys were also calculated, a percolation threshold value of ~0.516 for ductile-brittle transition in these amorphous alloys was obtained. Therefore, our analysis results suggest that ~0.516 appears to be a universal percolation threshold value for ductile-brittle transition in amorphous alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. The nature and properties of amorphous matter
2. Supercooled liquids and the glass transition10.1038/35065704 ↗
3. Fe-B-Si-Zr bulk metallic glasses with ultrahigh compressive strength and excellent soft magnetic properties10.1016/j.matlet.2016.06.052 ↗
4. Thermoplasticity of Cu45Zr42.55Y3.45Al9 metallic glass
5. Serrated flow behavior in a Pd-based bulk metallic glass under nanoindentation10.1016/j.jnoncrysol.2017.01.010 ↗
6. The elastic properties, elastic models and elastic perspectives of metallic glasses10.1016/j.pmatsci.2011.07.001 ↗
7. Local elastic properties of a metallic glass10.1038/nmat3024 ↗
8. Atomic mechanism of internal friction in a model metallic glass10.1103/PhysRevB.90.144201 ↗
9. Macroscopic tensile plasticity by scalarizating stress distribution in bulk metallic glass10.1038/srep21929 ↗
10. Strong size effect of compressive plasticity of Ce70Ga8.5Cu18.5Ni3 bulk metallic glass at room temperature
11. Shear band propagation and plastic softening of metallic glass under cyclic compression10.1016/j.jallcom.2016.11.039 ↗
12. Divergent strain acceleration effects in metallic glasses10.1016/j.scriptamat.2016.12.017 ↗
13. Flow unit perspective on room temperature homogeneous plastic deformation in metallic glasses10.1103/PhysRevLett.113.045501 ↗
14. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
15. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
16. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
17. Flow units: the “defects” of amorphous alloys10.1360/SSPMA2013-00042 ↗
18. The “tension transformation zone” model of amorphous alloys10.1360/N972016-00509 ↗
19. Correlation between onset of yielding and free volume in metallic glasses10.1016/j.scriptamat.2009.12.015 ↗
20. Phase structure and adhesion in polymer blends: a criterion for rubber toughening10.1016/0032-3861(85)90015-1 ↗
21. Recent progress in amorphous metal foams
22. Experimental characterization of shear transformation zones for plastic flow of bulk metallic10.1073/pnas.0806051105 ↗
23. Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys10.1016/S0025-5408(01)00715-2 ↗
24. Micromechanism of affecting the shear banding behaviors in metallic glass
25. What can plasticity of amorphous silicon tell us about plasticity of metallic glasses10.1007/s11661-007-9368-2 ↗
26. A generalized criterion for rubber toughening: the critical matrix ligament thickness10.1002/app.1988.070350220 ↗
27. Study of the brittle ductile transition of polymer blendsII. A geometric model
28. Fractal atomic-level percolation in metallic glasses10.1126/science.aab1233 ↗
29. Limpert · 2017 · vol. 14 · 8
30. Correlation between local structure and dynamic heterogeneity in a metallic glass-forming liquid10.1016/j.jallcom.2015.12.223 ↗
31. Structural origin of fractional Stokes-Einstein relation in glass-forming liquids
32. Stokes-Einstein relation for pure simple fluids10.1063/1.433792 ↗
33. The activation energy and volume of flow units of metallic glasses10.1016/j.scriptamat.2012.03.009 ↗