Synthesis and characterization of Zr-based in situ crystal precipitated and liquid phase separated bulk metallic glass composite
Source abstract
Abstract
Abstract The aim of this study was to evaluate new Zr-based bulk metallic composites with crystallized dendrites or droplets which have the volume fraction below the critical one (the percolation limit). The Cu 36 Zr 48 Al 8 Ag 8 alloy was chosen as matrix. Dendrites formed by in-situ solidification due to Ni addition. It was found that a new monotectic alloy system can be created successfully owing to Y addition (1–7 at.%) to the matrix. Small amount of dendrites with non-random distribution has a strong influence on the compressive strength. Experiment showed that the alloy with 4.1 at.% Ni has the maximum compressive strength (1998 MPa) and Young's modulus (86 GPa) within the examined samples. The results of compression test reveal that the cracks propagate near the small droplets below 1 μm in diameter which generate weakening in the microstructure. In contrast, the large droplets especially above 3 μm in diameter create a strong barrier for the shear band propagation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
2. A new TiCuHfSi bulk metallic glass with potential for biomedical applications10.1016/j.matdes.2013.08.075 ↗
3. Designing plastic Cu-based bulk metallic glass via minor addition of nickel10.1016/j.matdes.2013.12.041 ↗
4. Bulk metallic glasses and glassy/crystalline
5. Effect of Ag content on thermal stability and crystallization behavior of Zr–Cu–Ni–Al–Ag bulk metallic glass10.1016/j.jnoncrysol.2014.12.036 ↗
6. Microstructure, thermal stability and mechanical properties of Zr–Cu–Al–Sn bulk metallic glass10.1016/j.jnoncrysol.2015.09.016 ↗
7. Enhanced plasticity in Zr-Cu-Ag-Al-Be bulk metallic glasses10.1016/j.jnoncrysol.2015.01.002 ↗
8. Shear band relaxation in a deformed bulk metallic glass10.1016/j.actamat.2016.02.061 ↗
9. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
10. Microstructural percolation assisted breakthrough of trade-off between strength and ductility in CuZr-based metallic glass composites10.1038/srep04167 ↗
11. Metallic glass matrix composites10.1016/j.mser.2015.12.001 ↗
12. Phase transformation and work-hardening behavior of Ti-based bulk metallic glass composite, applied10.9729/AM.2015.45.2.37 ↗
13. Temperature dependent dynamic flow behavior of an in-situ Ti-based bulk metallic glass composite10.1016/j.msea.2014.12.100 ↗
14. Comparison of mechanical response in CuZrAl–V and CuZrAl–Co bulk metallic glass composites10.1016/j.jallcom.2013.01.097 ↗
15. A bridge from monotectic alloys to liquid-phase-separated bulk metallic glasses: design, microstructure and phase evolution10.1016/j.actamat.2012.12.031 ↗
16. Microstructure and magnetic properties of Gd-Hf-Co-Al phase separated metallic glasses10.1016/j.intermet.2011.09.002 ↗
17. Phase formation and mechanical properties of Ti–Cu–Ni–Zr bulk metallic glass composites10.1016/j.actamat.2013.10.068 ↗
18. High strain rate compressive behavior of Ti-based metallic glass matrix composites10.1016/j.intermet.2014.03.012 ↗
19. The study on interface and property of TiNb/Zr-based metallic glassy composite fabricated by SPS10.1016/j.jnoncrysol.2015.07.008 ↗
20. Towards an understanding of tensile deformation in Ti-based bulk metallic glass matrix composites with BCC dendrites10.1038/srep22563 ↗
21. Effects of geometric factors and shear band patterns on notch sensitivity in bulk metallic glasses10.1016/j.intermet.2016.09.001 ↗
22. Intrinsic or extrinsic size-dependent deformation behavior of a Zr-based bulk metallic glass in supercooled liquid state?10.1016/j.jallcom.2013.11.168 ↗
23. Rapid solidification of silver-rich Ag–Cu–Zr alloys10.1016/j.jallcom.2011.12.089 ↗
24. Stable miscibility gap in liquid Cu–Zr–Ag ternary alloy10.1016/j.jallcom.2012.07.015 ↗
25. Effect of Y and Ni addition on liquid immiscibility in Cu–Zr–Ag ternary alloys10.1016/j.jallcom.2013.12.087 ↗
26. Glass-formation and crystallization processes in Ag–Y–Cu alloys10.1016/j.jnoncrysol.2012.05.012 ↗
27. Lead-free solders: enthalpies of mixing of liquid Ag–Cu–Ni–Sn alloys10.1557/jmr.2006.0157 ↗
28. Enhanced glass forming ability and mechanical properties of new Cu-based bulk metallic glasses10.1016/j.msea.2006.07.141 ↗
29. Glass-forming ability and mechanical properties of the ternary Cu-Zr-Al and quaternary Cu-Zr-Al-Ag bulk metallic glasses10.2320/matertrans.MJ200704 ↗
30. Formation and thermal stability of new Zr–Cu-based bulk glassy alloys with unusual glass-forming ability10.1016/j.jallcom.2008.07.152 ↗
31. Effect of substituting elements on glass-forming ability of the new Zr48Cu36Al8Ag8 bulk metallic glass-forming alloy10.1016/j.jallcom.2010.02.052 ↗
32. Overheating effects on thermal stability and mechanical properties of Cu36Zr48Ag8Al8 bulk metallic glass10.1016/j.matdes.2009.07.028 ↗
33. New Cu–Zr-based bulk metallic glasses with large diameters of up to 1.5 cm10.1016/j.scriptamat.2006.06.024 ↗
34. Fabrication of Cu-Zr-Ag-Al glassy alloy samples with a diameter of 20mm by water quenching10.1557/JMR.2008.0183 ↗
35. Formation of Ti–Zr–Cu–Ni bulk metallic glasses10.1063/1.360537 ↗
36. Richardson · 1979 · 44
37. Designing amorphous/crystalline composites by liquid-liquid phase separation10.4028/www.scientific.net/MSF.790-791.473 ↗
38. Roles of minor additions in formation and properties of bulk metallic glasses10.1016/j.pmatsci.2006.07.003 ↗
39. Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites10.1016/j.actamat.2009.07.042 ↗